Generated by kicad-footprint-generator · KiCad file format 20260206
LT8336EV#PBF
Analog Devices · DC-DC Converters · LQFN-16(3x3)
LT8336EV#PBF from Analog Devices, in a LQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SYNC/MODE | input | External synchronization input and mode selection pin selecting Burst, Burst/SSFM, Pulse-Skipping, Pulse-Skipping/SSFM or external clock sync (0.3MHz to 3MHz). |
| 2 | RT | passive | Switching frequency adjustment pin; connect a resistor from RT to GND at Pin 3 and do not leave it open. |
| 3 | GND | power_in | Ground pin; the RT resistor and FB divider return to this pin. |
| 4 | FB | input | Feedback input receiving the voltage from the resistor divider between VOUT and GND, regulated to 1.000V typical. |
| 5 | GND | power_in | Ground pin; connect one 1µF VOUT capacitor between Pin 6 and this pin only to complete the Silent Switcher configuration. |
| 6 | VOUT | passive | Output pin (40V max); connect a 1µF capacitor between this pin and GND at Pin 5 only, placed as close to the IC as possible. |
| 7 | VOUT | passive | Output pin (40V max); connect a matching 1µF capacitor between this pin and GND at Pin 8 only, placed as close to the IC as possible. |
| 8 | GND | power_in | Ground pin; connect the 1µF VOUT capacitor from Pin 7 to this pin only. |
| 9 | SW | passive | Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST. |
| 10 | SW | passive | Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST. |
| 11 | SW | passive | Output of the internal power switches; tie Pins 9, 10, 11 together to the inductor and one side of the boost capacitor CBST. |
| 12 | BST | passive | Top switch gate driver supply pin; place a 0.1µF capacitor between BST and SW close to the IC. |
| 13 | VIN | power_in | Input supply pin (2.7V to 40V operation) that must be connected to the input of the power stage, the inductor's input terminal. |
| 14 | EN/UVLO | input | Enable and input undervoltage lockout pin with 1.0V typical threshold; below 0.15V VIN current is 0.3µA typical, tie to VIN if unused. |
| 15 | INTVCC | power_out | Internal 3.5V regulator bypass pin; bypass with 1µF or larger low ESR ceramic capacitor to ground and do not load externally. |
| 16 | PG | output | Open-drain power good output (10V max) pulled low when output is more than ±8% outside regulation, EN/UVLO below 1V, INTVCC too low, or thermal shutdown. |
| 17 | GND | power_in | Exposed pad is ground and must be soldered to the PCB ground plane for thermal and electrical performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFN-16(3x3) |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operation Voltage | VIN | 2.7 | 40 | V | full temperature range | 2 | |
| VIN Quiescent Current (shutdown) | IQ | 0.3 | 1 | µA | EN/UVLO = 0.15V | 2 | |
| VIN Quiescent Current (shutdown, full temp) | IQ | 0.3 | 10 | µA | EN/UVLO = 0.15V, full operating temperature range | 2 | |
| VIN Quiescent Current Burst | IQ | 4 | 8 | µA | SYNC/MODE = 0V, Not Switching | 2 | |
| VIN Quiescent Current Pulse-Skipping | IQ | 0.9 | 1.5 | mA | SYNC/MODE = Open, Not Switching | 2 | |
| VIN Quiescent Current PassThru | IQ | 15 | 25 | µA | VIN = 10.1V, VOUT = 10V, FB = 1.05V (In PassThru Mode) | 2 | |
| FB Regulation Voltage E-Grade/H-Grade | VFB | 0.994 | 1 | 1.006 | V | E-Grade/H-Grade | 3 |
| FB Regulation Voltage E-Grade/H-Grade (full temp) | VFB | 0.985 | 1 | 1.01 | V | E-Grade/H-Grade, full operating temperature range | 3 |
| FB Line Regulation | 0.005 | 0.02 | %/V | 2.7V < VIN < 40V | 3 | ||
| FB Pin Input Current | -20 | 20 | nA | FB = 1.0V | 3 | ||
| Switching Frequency | fSW | 1.85 | 2 | 2.15 | MHz | RT = 47.5kΩ, full temperature range | 3 |
| Synchronizable Frequency | 0.3 | 3 | MHz | SYNC/MODE = External Clock | 3 | ||
| SYNC Logic Low | 0.4 | V | SYNC/MODE pin input logic level | 3 | |||
| SYNC Logic High | 1.7 | V | SYNC/MODE pin input logic level | 3 | |||
| EN/UVLO Threshold Voltage Falling | 0.94 | 1 | 1.06 | V | 3 | ||
| EN/UVLO Input Bias Current | -40 | 40 | nA | EN/UVLO = 2V | 3 | ||
| PG Upper Threshold Offset | 5 | 8 | 12 | % | FB Falling | 3 | |
| PG Lower Threshold Offset | -12 | -8 | -5 | % | FB Rising | 3 | |
| PG Leakage Current | -40 | 40 | nA | PG = 3.5V | 3 | ||
| PG Pull-Down Resistance | 700 | 2000 | Ω | PG = 0.1V | 3 | ||
| Bottom Switch Current Limit | 2.5 | 3 | 3.3 | A | 3 | ||
| Bottom Switch Minimum Off-time | 20 | 50 | ns | 3 | |||
| Bottom Switch Minimum On-time | 20 | 80 | ns | VIN = 9.5V, VOUT = 10V | 3 | ||
| SW Leakage Current | -1.5 | 1.5 | µA | VOUT = 40V, SW = 0V, 40V | 3 | ||
| Bottom Switch On-Resistance | 70 | mΩ | ISW = 1A | 3 | |||
| Top Switch On-Resistance | 75 | mΩ | ISW = 1A | 3 | |||
| Soft-Start Time | 1.4 | ms | RT = 47.5kΩ | 3 | |||
| PassThru Top Switch Reverse Current Limit | 750 | mA | VIN = 9.9V, VOUT = 10V, FB = 1.05V (Top Switch Turns Off) | 3 | |||
| VIN, VOUT, EN/UVLO Voltage | 40 | V | 2 | ||||
| SYNC/MODE, FB Voltage | 6 | V | 2 | ||||
| PG Voltage | 10 | V | 2 | ||||
| Operating Junction Temperature Range LT8336E | TJ | -40 | 125 | °C | Notes 2, 3 | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-Ambient | θJA | 42.8 | °C/W | Note 4 | 2 | ||
| Thermal Resistance Junction-Case (top) | θJCtop | 45.2 | °C/W | Note 4 | 2 | ||
| Thermal Resistance Junction-Case (bottom) | θJCbottom | 8.2 | °C/W | Note 4 | 2 |
CAD (KiCad official)
- Symbol:
LT8336EV#PBF - Footprint:
Package_DFN_QFN:LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: LQFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
lt8336ev-pbf-etched.step/lt8336ev-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8336ev-pbf.step/lt8336ev-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
65b0ead76f1e1165, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).