Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMR54406DBVR

Texas Instruments · DC-DC Converters · SOT-23-6

LMR54406DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CB passive Bootstrap capacitor connection for the high-side FET driver. Connect a high quality 100nF capacitor from this pin to the SW pin.
2 GND power_in Power ground pin. Connected to the source of the low-side FET internally. Connect to system ground, ground side of CIN and COUT. The path to CIN must be as short as possible.
3 FB input Feedback input to the converter. Connect a resistor divider to set the output voltage (VFB = 0.8V typical, 0.79-0.81V). Never short this terminal to ground during operation. Absolute max -0.3V to 5.5V.
4 EN input Precision enable input to the converter. Do not float. High = on, low = off. Can be tied to VIN. Precision enable allows adjustable UVLO via external resistor divider (VEN rising ~1.23V, falling ~1.1V, 130mV hysteresis).
5 VIN power_in Supply input pin to the internal bias LDO and high-side FET. Operating range 4V to 36V (absolute max 45V DC, 50V transient). Connect to the input supply and input bypass capacitors CIN. Input bypass capacitors must be directly connected to this pin and GND.
6 SW output Switching output of the converter. Internally connected to the source of the high-side FET and drain of the low-side FET. Connect to the power inductor. High-side RDS(on) ~450 mΩ, low-side RDS(on) ~240 mΩ.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Management (PMIC)
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • LMR54406DBVR
  • LMR54406DBVRFDBVR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN to GND input voltage (absolute maximum) -0.3 45 V 4
FB to GND voltage (absolute maximum) -0.3 5.5 V 4
CBOOT to SW voltage (absolute maximum) -0.3 5.5 V 4
SW to PGND voltage (absolute maximum) -5 V less than 10ns transient; max printed as VIN+0.3 4
EN to GND voltage (absolute maximum) -0.3 V max printed as VIN+0.3 4
SW to GND voltage (absolute maximum) -0.3 V max printed as VIN+0.3 4
Junction temperature TJ (absolute maximum) TJ -40 150 °C 4
Storage temperature (absolute maximum) Tstg -65 150 °C 4
Input voltage VIN to GND (recommended) 4 36 V 4
EN to GND voltage (recommended) 0 V max printed as VIN; must not exceed VIN by more than 0.3V 4
Output voltage VOUT (recommended) VOUT 0.8 28 V 4
Output current LMR54406 (recommended) 0 0.6 A LMR54406 4
Operating junction temperature range (recommended) TJ -40 150 °C 4
VIN UVLO rising threshold VIN_UVLO 3.55 3.75 4 V Rising threshold 5
VIN UVLO falling threshold VIN_UVLO 3.25 3.45 3.65 V Falling threshold 5
Operating quiescent current (non-switching) IQ-nonSW 80 120 µA VEN = 3.3V, VFB=1.1V (PFM variant only) 5
Shutdown quiescent current measured at VIN pin ISD 3 10 µA VEN = 0V 5
Enable input high-level for VOUT VEN-VOUT-H 1.1 1.23 1.36 V VENABLE rising 5
Enable input low-level for VOUT VEN-VOUT-L 0.95 1.1 1.22 V VENABLE falling 5
Enable input leakage current ILKG-EN 10 200 nA VEN = 3.3V 5
Feedback voltage VFB 0.79 0.8 0.81 V 5
Internal oscillator frequency FOSC 0.935 1.1 1.265 MHz 5
High-side current limit LMR54406 ISC 0.85 1.1 1.3 A LMR54406 5
Low-side current limit LMR54406 ILS-LIMIT 0.65 0.8 0.95 A LMR54406 5
Input voltage operating range (system characteristics) VIN 4 36 V 7
Adjustable output voltage regulation (PFM) VOUT -1.5 2.5 % PFM operation 7
VIN UVLO hysteresis VIN_UVLO 0.3 V Hysteresis 5
Enable input hysteresis for VOUT VEN-VOUT-HYS 130 mV Hysteresis 5
Feedback leakage current ILKG-FB 0.2 nA FB = 1.2V 5
Zero cross detector threshold IL-ZC 0.02 A PFM variants only 5
High-side MOSFET ON-resistance RDS-ON-HS 450 mΩ TJ=25 ℃, VIN = 12V 5
Low-side MOSFET ON-resistance RDS-ON-LS 240 mΩ TJ=25 ℃, VIN = 12V 5
Thermal shutdown rising threshold TSD-Rising 170 °C Shutdown threshold 6
Thermal shutdown falling threshold TSD-Falling 158 °C Recovery threshold 6
Minimum switch on-time tON-MIN 60 ns IOUT = 1A 7
Minimum switch off-time tOFF-MIN 110 ns IOUT = 1A 7
Maximum switch on-time tON-MAX 7.5 µs 7
Internal soft-start time tSS 1.8 ms 7
Input supply current when in regulation ISUPPLY 90 µA VIN =12V, VOUT = 3.3V, IOUT = 0A, RFBT = 1MΩ, PFM variant 7
Maximum switch duty cycle DMAX 98 % 7
FB pin voltage required to trip short-circuit hiccup mode VHC 0.325 V 7
Switch voltage dead time tD 2 ns 7
Junction-to-ambient thermal resistance RθJA 173 °C/W JESD 51-7, 4-layer JEDEC board; not for design use 5
Junction-to-case (top) thermal resistance RθJC(top) 116 °C/W 5
Junction-to-board thermal resistance RθJB 31 °C/W 5
Junction-to-top characterization parameter ψJT 20 °C/W 5
Junction-to-board characterization parameter ψJB 30 °C/W 5

CAD (KiCad official)

  • Symbol: LMR54406DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmr54406dbvr-etched.step / lmr54406dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmr54406dbvr.step / lmr54406dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 f0dc0ace8430cad9, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF