3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLMR54406DBVR
Texas Instruments · DC-DC Converters · SOT-23-6
LMR54406DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CB | passive | Bootstrap capacitor connection for the high-side FET driver. Connect a high quality 100nF capacitor from this pin to the SW pin. |
| 2 | GND | power_in | Power ground pin. Connected to the source of the low-side FET internally. Connect to system ground, ground side of CIN and COUT. The path to CIN must be as short as possible. |
| 3 | FB | input | Feedback input to the converter. Connect a resistor divider to set the output voltage (VFB = 0.8V typical, 0.79-0.81V). Never short this terminal to ground during operation. Absolute max -0.3V to 5.5V. |
| 4 | EN | input | Precision enable input to the converter. Do not float. High = on, low = off. Can be tied to VIN. Precision enable allows adjustable UVLO via external resistor divider (VEN rising ~1.23V, falling ~1.1V, 130mV hysteresis). |
| 5 | VIN | power_in | Supply input pin to the internal bias LDO and high-side FET. Operating range 4V to 36V (absolute max 45V DC, 50V transient). Connect to the input supply and input bypass capacitors CIN. Input bypass capacitors must be directly connected to this pin and GND. |
| 6 | SW | output | Switching output of the converter. Internally connected to the source of the high-side FET and drain of the low-side FET. Connect to the power inductor. High-side RDS(on) ~450 mΩ, low-side RDS(on) ~240 mΩ. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
LMR54406DBVRLMR54406DBVRFDBVR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN to GND input voltage (absolute maximum) | -0.3 | 45 | V | 4 | |||
| FB to GND voltage (absolute maximum) | -0.3 | 5.5 | V | 4 | |||
| CBOOT to SW voltage (absolute maximum) | -0.3 | 5.5 | V | 4 | |||
| SW to PGND voltage (absolute maximum) | -5 | V | less than 10ns transient; max printed as VIN+0.3 | 4 | |||
| EN to GND voltage (absolute maximum) | -0.3 | V | max printed as VIN+0.3 | 4 | |||
| SW to GND voltage (absolute maximum) | -0.3 | V | max printed as VIN+0.3 | 4 | |||
| Junction temperature TJ (absolute maximum) | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature (absolute maximum) | Tstg | -65 | 150 | °C | 4 | ||
| Input voltage VIN to GND (recommended) | 4 | 36 | V | 4 | |||
| EN to GND voltage (recommended) | 0 | V | max printed as VIN; must not exceed VIN by more than 0.3V | 4 | |||
| Output voltage VOUT (recommended) | VOUT | 0.8 | 28 | V | 4 | ||
| Output current LMR54406 (recommended) | 0 | 0.6 | A | LMR54406 | 4 | ||
| Operating junction temperature range (recommended) | TJ | -40 | 150 | °C | 4 | ||
| VIN UVLO rising threshold | VIN_UVLO | 3.55 | 3.75 | 4 | V | Rising threshold | 5 |
| VIN UVLO falling threshold | VIN_UVLO | 3.25 | 3.45 | 3.65 | V | Falling threshold | 5 |
| Operating quiescent current (non-switching) | IQ-nonSW | 80 | 120 | µA | VEN = 3.3V, VFB=1.1V (PFM variant only) | 5 | |
| Shutdown quiescent current measured at VIN pin | ISD | 3 | 10 | µA | VEN = 0V | 5 | |
| Enable input high-level for VOUT | VEN-VOUT-H | 1.1 | 1.23 | 1.36 | V | VENABLE rising | 5 |
| Enable input low-level for VOUT | VEN-VOUT-L | 0.95 | 1.1 | 1.22 | V | VENABLE falling | 5 |
| Enable input leakage current | ILKG-EN | 10 | 200 | nA | VEN = 3.3V | 5 | |
| Feedback voltage | VFB | 0.79 | 0.8 | 0.81 | V | 5 | |
| Internal oscillator frequency | FOSC | 0.935 | 1.1 | 1.265 | MHz | 5 | |
| High-side current limit LMR54406 | ISC | 0.85 | 1.1 | 1.3 | A | LMR54406 | 5 |
| Low-side current limit LMR54406 | ILS-LIMIT | 0.65 | 0.8 | 0.95 | A | LMR54406 | 5 |
| Input voltage operating range (system characteristics) | VIN | 4 | 36 | V | 7 | ||
| Adjustable output voltage regulation (PFM) | VOUT | -1.5 | 2.5 | % | PFM operation | 7 | |
| VIN UVLO hysteresis | VIN_UVLO | 0.3 | V | Hysteresis | 5 | ||
| Enable input hysteresis for VOUT | VEN-VOUT-HYS | 130 | mV | Hysteresis | 5 | ||
| Feedback leakage current | ILKG-FB | 0.2 | nA | FB = 1.2V | 5 | ||
| Zero cross detector threshold | IL-ZC | 0.02 | A | PFM variants only | 5 | ||
| High-side MOSFET ON-resistance | RDS-ON-HS | 450 | mΩ | TJ=25 ℃, VIN = 12V | 5 | ||
| Low-side MOSFET ON-resistance | RDS-ON-LS | 240 | mΩ | TJ=25 ℃, VIN = 12V | 5 | ||
| Thermal shutdown rising threshold | TSD-Rising | 170 | °C | Shutdown threshold | 6 | ||
| Thermal shutdown falling threshold | TSD-Falling | 158 | °C | Recovery threshold | 6 | ||
| Minimum switch on-time | tON-MIN | 60 | ns | IOUT = 1A | 7 | ||
| Minimum switch off-time | tOFF-MIN | 110 | ns | IOUT = 1A | 7 | ||
| Maximum switch on-time | tON-MAX | 7.5 | µs | 7 | |||
| Internal soft-start time | tSS | 1.8 | ms | 7 | |||
| Input supply current when in regulation | ISUPPLY | 90 | µA | VIN =12V, VOUT = 3.3V, IOUT = 0A, RFBT = 1MΩ, PFM variant | 7 | ||
| Maximum switch duty cycle | DMAX | 98 | % | 7 | |||
| FB pin voltage required to trip short-circuit hiccup mode | VHC | 0.325 | V | 7 | |||
| Switch voltage dead time | tD | 2 | ns | 7 | |||
| Junction-to-ambient thermal resistance | RθJA | 173 | °C/W | JESD 51-7, 4-layer JEDEC board; not for design use | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 116 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 31 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 20 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 30 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LMR54406DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmr54406dbvr-etched.step/lmr54406dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmr54406dbvr.step/lmr54406dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
f0dc0ace8430cad9, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).