Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADA4841-1YRJZ-R2

Analog Devices · Operational Amplifier · SOT-23-6

ADA4841-1YRJZ-R2 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VOUT output Amplifier output, which the datasheet states can swing to less than 50 mV of either rail.
2 -VS power_in Negative power supply pin; the input common-mode voltage range extends down to this supply.
3 +IN input Non-inverting amplifier input whose common-mode voltage range extends down to the negative supply.
4 -IN input Inverting amplifier input.
5 POWER DOWN input Power-down control pin for the amplifier; the logic levels and power-down behavior are covered in the Power-Down Operation section, which is not in the provided pages.
6 +VS power_in Positive power supply pin; the datasheet gives a wide supply range of 2.7 V to 12 V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category Amplifiers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Range 2.7 12 V 3
Supply Voltage 12.6 V 6
Differential Input Voltage 1.8 V 6
Storage Temperature Range -65 125 °C 6
Operating Temperature Range -40 125 °C 6
Junction Temperature 150 °C 6
Thermal Resistance, 6-Lead SOT-23 θJA 170 °C/W Device soldered in circuit board, JEDEC 4-layer board 6
Input Common-Mode Voltage Range -5.1 4 V 3
Common-Mode Rejection Ratio (CMRR) 95 115 dB VCM = 4 V 3
Input Offset Voltage 40 300 µV 3
Input Bias Current 3 5.3 µA 3
Input Offset Current 0.1 0.5 µA 3
Open-Loop Gain 103 120 dB VO = ±4 V 3
-3 dB Bandwidth 58 80 MHz VO = 0.02 V p-p 3
Slew Rate 12 13 V/µs G = +1, VO = 9 V step, RL = 1 kΩ 3
POWER DOWN Voltage Enabled 3.6 V 3
POWER DOWN Voltage Power Down 3.2 V 3
POWER DOWN Input Current (Enable) 1 2 µA POWER DOWN = +5 V 3
POWER DOWN Input Current (Power Down) -30 -13 µA POWER DOWN = −5 V 3
Output Voltage Swing 4.9 4.955 V G > +1 3
Quiescent Current/Amplifier 1.2 1.5 mA POWER DOWN = +5 V 3
Quiescent Current/Amplifier 40 90 µA POWER DOWN = −5 V 3
Positive Power Supply Rejection Ratio 95 110 dB +VS = +5 V to +6 V, −VS = −5 V 3
Negative Power Supply Rejection Ratio 96 120 dB +VS = +5 V, −VS = −5 V to −6 V 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADA4841-1YRJZ-R2
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ada4841-1yrjz-r2-etched.step / ada4841-1yrjz-r2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ada4841-1yrjz-r2.step / ada4841-1yrjz-r2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 bf74751517b1ca3d, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF