3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownADA4841-1YRJZ-R2
Analog Devices · Operational Amplifier · SOT-23-6
ADA4841-1YRJZ-R2 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output, which the datasheet states can swing to less than 50 mV of either rail. |
| 2 | -VS | power_in | Negative power supply pin; the input common-mode voltage range extends down to this supply. |
| 3 | +IN | input | Non-inverting amplifier input whose common-mode voltage range extends down to the negative supply. |
| 4 | -IN | input | Inverting amplifier input. |
| 5 | POWER DOWN | input | Power-down control pin for the amplifier; the logic levels and power-down behavior are covered in the Power-Down Operation section, which is not in the provided pages. |
| 6 | +VS | power_in | Positive power supply pin; the datasheet gives a wide supply range of 2.7 V to 12 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Amplifiers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Range | 2.7 | 12 | V | 3 | |||
| Supply Voltage | 12.6 | V | 6 | ||||
| Differential Input Voltage | 1.8 | V | 6 | ||||
| Storage Temperature Range | -65 | 125 | °C | 6 | |||
| Operating Temperature Range | -40 | 125 | °C | 6 | |||
| Junction Temperature | 150 | °C | 6 | ||||
| Thermal Resistance, 6-Lead SOT-23 | θJA | 170 | °C/W | Device soldered in circuit board, JEDEC 4-layer board | 6 | ||
| Input Common-Mode Voltage Range | -5.1 | 4 | V | 3 | |||
| Common-Mode Rejection Ratio (CMRR) | 95 | 115 | dB | VCM = 4 V | 3 | ||
| Input Offset Voltage | 40 | 300 | µV | 3 | |||
| Input Bias Current | 3 | 5.3 | µA | 3 | |||
| Input Offset Current | 0.1 | 0.5 | µA | 3 | |||
| Open-Loop Gain | 103 | 120 | dB | VO = ±4 V | 3 | ||
| -3 dB Bandwidth | 58 | 80 | MHz | VO = 0.02 V p-p | 3 | ||
| Slew Rate | 12 | 13 | V/µs | G = +1, VO = 9 V step, RL = 1 kΩ | 3 | ||
| POWER DOWN Voltage Enabled | 3.6 | V | 3 | ||||
| POWER DOWN Voltage Power Down | 3.2 | V | 3 | ||||
| POWER DOWN Input Current (Enable) | 1 | 2 | µA | POWER DOWN = +5 V | 3 | ||
| POWER DOWN Input Current (Power Down) | -30 | -13 | µA | POWER DOWN = −5 V | 3 | ||
| Output Voltage Swing | 4.9 | 4.955 | V | G > +1 | 3 | ||
| Quiescent Current/Amplifier | 1.2 | 1.5 | mA | POWER DOWN = +5 V | 3 | ||
| Quiescent Current/Amplifier | 40 | 90 | µA | POWER DOWN = −5 V | 3 | ||
| Positive Power Supply Rejection Ratio | 95 | 110 | dB | +VS = +5 V to +6 V, −VS = −5 V | 3 | ||
| Negative Power Supply Rejection Ratio | 96 | 120 | dB | +VS = +5 V, −VS = −5 V to −6 V | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADA4841-1YRJZ-R2 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ada4841-1yrjz-r2-etched.step/ada4841-1yrjz-r2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4841-1yrjz-r2.step/ada4841-1yrjz-r2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
bf74751517b1ca3d, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).