Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

EG4002A

EG Micro · Human Body Sensing Sensor · SOP-8

EG4002A from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of the internal first-stage operational amplifier (OP1), with an absolute maximum of -0.3 V to 7 V relative to GND.
2 1IN- input Inverting input of the internal first-stage operational amplifier, with an absolute maximum of -0.3 V to 7 V relative to GND.
3 VC input Trigger-inhibit input: when VC is below 0.2·VDD the OUT pin is held low and triggering is blocked, and when VC is above 0.2·VDD triggering is enabled.
4 A input Retriggerable/non-retriggerable control: A = '1' enables retriggering, and A = '0' selects non-retriggerable operation.
5 GND power_in Chip ground reference pin.
6 OUT output Active-high control signal output that sources or sinks +/-25 mA at VDD = 5 V and +/-10 mA at VDD = 3 V.
7 CT input Oscillator timing pin that requires an external capacitor to GND and a pull-up resistor to VDD, where the pull-up resistor must be greater than 100 kΩ.
8 VDD power_in Supply input with an operating range of +3 V to +6 V.

Key specifications

Parameter Value
Manufacturer EG Micro
Package SOP-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Vdd pin voltage relative to GND VDD -0.3 7 V 8
OUT pin voltage relative to GND OUT -0.3 7 V 8
CT pin voltage relative to GND CT -0.3 7 V 8
A pin voltage relative to GND A -0.3 7 V 8
VC pin voltage relative to GND (printed as FB pin) VC -0.3 7 V 8
1IN- pin voltage relative to GND 1IN- -0.3 7 V 8
1OUT pin voltage relative to GND 1OUT -0.3 7 V 8
Ambient temperature TA -45 85 ℃ 8
Storage temperature Tstr -65 125 ℃ 8
Soldering temperature TL 300 ℃ T=10S 8
Operating supply voltage (Vdd pin input voltage) VDD 3 6 V 9
Quiescent operating current Icc 65 75 uA Vdd=5V 9
Quiescent operating current Icc 35 45 uA Vdd=3V 9
Op-amp input offset voltage Vos 2 5 mV Vdd=5V 9
Op-amp input offset current Ios 50 nA Vdd=5V 9
Op-amp open-loop voltage gain Avo 60 dB Vdd=5V 9
Op-amp output high level VOPAH 4.5 4.85 V Vdd=5V,ILOAD=5uA 9
Op-amp output low level VOPAL 0.1 V Vdd=5V, ILOAD=-5uA 9
VC input high level VCH 1.1 V Vdd=5V 9
VC input high level VCH 0.7 V Vdd=3V 9
VC input low level VCL 0.4 V Vdd=5V 9
VC input low level VCL 0.3 V Vdd=3V 9
OUT output high level VOH 4.5 4.6 V Vdd=5V, ILOAD=10mA 9
OUT output high level VOH 2.5 2.6 V Vdd=3V, ILOAD=5mA 9
OUT output low level VOL 0.3 0.5 V Vdd=5V, ILOAD=-10mA 9
A pin input high level VAH 3.5 5 V Vdd=5V 9
A pin input high level VAH 2 3 V Vdd=3V 9
A pin input low level VAL 0 1 V Vdd=5V 9
A pin input low level VAL 0 0.5 V Vdd=3V 9

CAD (KiCad official)

  • Symbol: EG4002A
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: eg4002a-etched.step / eg4002a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eg4002a.step / eg4002a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: EG Micro datasheet (13 pp, sha256 b8900d329e8e5b7a, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF