Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L011D4P7

STMicroelectronics · ST Microelectronics · TSSOP-14

STM32L011D4P7 from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB9-BOOT0 input Input-only dedicated BOOT0 pin that selects the boot memory; the datasheet lists no alternate functions for PB9 on this package.
2 PC14-OSC32_IN bidirectional 5 V tolerant (FT) I/O that serves as the OSC32_IN low-speed oscillator input.
3 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that serves as the OSC32_OUT low-speed oscillator output.
4 NRST bidirectional Active-low bidirectional reset pin with embedded weak pull-up, acting as device reset input and internal reset output.
5 PA0-CK_IN bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC, with ADC_IN0 and USART2_RX among its functions.
6 PA1 bidirectional 5 V tolerant I/O (FT) with ADC_IN1 and COMP1_INP, plus USART2_RTS_DE and LPUART1_TX among its alternate functions.
7 PA4 bidirectional 3.3 V tolerant I/O (TTa) connected directly to the ADC, with ADC_IN4, SPI1_NSS and USART2_CK among its functions.
8 PA7 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI, USART2_CTS and ADC_IN7 among its functions.
9 VSS power_in Digital and analog ground pin.
10 VDD power_in Digital power supply pin; on the TSSOP14 package VDDA is internally connected to this pin.
11 PA9 bidirectional 5 V tolerant I/O with Fast Mode Plus capability (FTf), with MCO, I2C1_SCL and USART2_TX among its functions.
12 PA10 bidirectional 5 V tolerant I/O with Fast Mode Plus capability (FTf), with I2C1_SDA, USART2_RX and TIM21_CH1 among its functions.
13 PA13 bidirectional 5 V tolerant I/O with Fast Mode Plus capability (FTf) that carries SWDIO for serial wire debug.
14 PA14 bidirectional 5 V tolerant I/O (FT) that carries SWCLK; on TSSOP14 it drives SPI1_MISO as an output while the bootloader is active, so first programming needs connect-under-reset over SWD to disable the bootloader.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-14
Category Embedded Processors & Controllers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD-VSS (external main supply, incl. VDDA, VDD) VDD-VSS -0.3 4 V including VDDA, VDD 46
Input voltage on TC pins VIN 4 V TC pins 46
Input voltage on any other pin VIN 4 V any other pin 46
Variation between different VDDx power pins /ΔVDD/ 50 mV 46
Variation between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 46
Variation between all different ground pins /ΔVSS/ 50 mV 46
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 47
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 47
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 47
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 47
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA except FTf pins 47
Output current sunk by FTf pins IIO 22 mA FTf pins 47
Output current sourced by any I/O and control pin IIO -16 mA 47
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 90 mA sum of all IOs and control pins 47
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA sum of all IOs and control pins 47
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA FT, FTf, RST and B pins 47
Injected current on TC pin IINJ(PIN) -5 5 mA TC pin 47
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 47
Storage temperature range TSTG -65 150 °C 47
Maximum junction temperature TJ 150 °C 47
Internal AHB clock frequency fHCLK 0 32 MHz 48
Internal APB1 clock frequency fPCLK1 0 32 MHz 48
Internal APB2 clock frequency fPCLK2 0 32 MHz 48
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 48
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 48
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD 48
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 48
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 48
Input voltage on BOOT0 pin VIN 0 5.5 V 48
Input voltage on TC pin VIN -0.3 V 48
Power dissipation, TSSOP14 package PD 210 mW TA = 85 °C (range 6) or TA = 105 °C (range 7) 48
Power dissipation, TSSOP14 package PD 53 mW TA = 125 °C (range 3) 48
Ambient temperature range TA -40 85 °C Maximum power dissipation (range 6) 49
Ambient temperature range TA -40 105 °C Maximum power dissipation (range 7) 49
Ambient temperature range TA -40 125 °C Maximum power dissipation (range 3) 49
Junction temperature range TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C (range 6) 49
Junction temperature range TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C (range 7) 49
Junction temperature range TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C (range 3) 49
Power on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 49
Power on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 49
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 49
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 49
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 49
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 51
VDDA voltage during VREFINT factory measure VVREF_MEAS 2.99 3 3.01 V 51
Accuracy of factory-measured VREFINT value AVREF_MEAS -5 5 mV Including uncertainties due to ADC and VDDA values 51
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 51
Temperature coefficient TCoeff 20 ppm/°C 0 °C < TJ < +50 °C 51
Long-term stability ACoeff 1000 ppm 1000 hours, T= 25 °C 51
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 51
Consumption of reference voltage buffer for ADC IBUF_ADC 13.5 25 µA 51
Supply current in Stop mode IDD (Stop) 0.34 0.99 µA TA = -40°C to 25°C 59
Supply current in Stop mode IDD (Stop) 0.94 4.2 µA TA= 85°C 59
Supply current in Stop mode IDD (Stop) 4.9 19 µA TA = 125°C 59
Supply current in Standby mode IDD (Standby) 0.23 0.6 µA Independent watchdog and LSI OFF, TA = -40 °C to 25 °C 60
Supply current in Standby mode IDD (Standby) 1.35 5 µA Independent watchdog and LSI OFF, TA = 125 °C 60
Data retention mode (minimum supply voltage) VRM 1.65 V STOP mode (or RESET) 70
Operating voltage (Flash read/write/erase) VDD 1.65 3.6 V Read / Write / Erase 71
User external clock source frequency fHSE_ext 1 8 32 MHz CSS is ON or PLL is used 64

CAD (KiCad official)

  • Symbol: STM32L011D4P7
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: stm32l011d4p7-etched.step / stm32l011d4p7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l011d4p7.step / stm32l011d4p7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (119 pp, sha256 1271aa38a181c7a2, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF