Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN65MLVD200ADR

Texas Instruments · LVDS ICs · SOIC-8

SN65MLVD200ADR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 R output Receiver output; this pin is driven by the receiver and is the logic output of the differential input.
2 RE input Receiver enable pin: High disables the receiver and Low enables it, with logic inputs rated -0.5 V to 4 V absolute maximum.
3 DE input Driver enable pin: High enables the driver and Low disables it, with logic inputs rated -0.5 V to 4 V absolute maximum.
4 D input Driver data input with VIH of 2 V minimum and VIL of 0.8 V maximum, rated -0.5 V to 4 V absolute maximum.
5 GND power_in Network ground terminal; all voltages except differential bus voltages are referenced to this pin.
6 A bidirectional Non-inverting differential bus I/O with ESD protection of ±8000 V HBM and absolute voltage limits of -1.8 V to 4 V for the SN65MLVD200A.
7 B bidirectional Inverting differential bus I/O with ESD protection of ±8000 V HBM and absolute voltage limits of -1.8 V to 4 V for the SN65MLVD200A.
8 VCC power_in Power supply input, 3.0 V minimum to 3.6 V maximum with 3.3 V nominal, and absolute maximum of 4 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Communication Interface Chip/UART/485/232
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 4 V 4
Input voltage (D, DE, RE) -0.5 4 V 4
Input voltage (A, B) SN65MLVD200A variant -1.8 4 V SN65MLVD200A and SN65MLVD204A 4
Output voltage (R) -0.3 4 V 4
Output voltage (Y, Z, A, or B) -1.8 4 V 4
Storage temperature Tstg -65 150 °C 4
Supply voltage VCC 3 3.3 3.6 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Voltage at any bus terminal VA, VB, VY or VZ -1.4 3.8 V 4
Differential load resistance RL 30 50 Ω 4
Operating free-air temperature TA -40 85 °C 4
Supply current, driver only ICC 13 22 mA RE and DE at VCC, RL = 50 Ω, All others open 5
Supply current, both disabled ICC 1 4 mA RE at VCC, DE at 0 V, RL = No Load, All others open 5
Supply current, both enabled ICC 16 24 mA RE at 0 V, DE at VCC, RL = 50 Ω, All others open 5
Supply current, receiver only ICC 4 13 mA RE at 0 V, DE at 0 V, All others open 5
Differential output voltage magnitude /VAB/ or /VYZ/ 480 650 mV See Figure 7-2 5
Change in differential output voltage magnitude between logic states Δ/VAB/ or Δ/VYZ/ -50 50 mV 5
Steady-state common-mode output voltage VOS(SS) 0.8 1.2 V See Figure 7-3 5
Change in steady-state common-mode output voltage between logic states ΔVOS(SS) -50 50 mV 5
Peak-to-peak common-mode output voltage VOS(PP) 150 mV 5
Maximum steady-state open-circuit output voltage (Y or A) VY(OC) or VA(OC) 0 2.4 V See Figure 7-7 5
Maximum steady-state open-circuit output voltage (Z or B) VZ(OC) or VB(OC) 0 2.4 V See Figure 7-7 5
Voltage overshoot, low-to-high level output VP(H) 1.2 V Relative to VSS, See Figure 7-5 5
Voltage overshoot, high-to-low level output VP(L) -0.2 V Relative to VSS, See Figure 7-5 5
High-level input current (D, DE) IIH 0 10 µA VIH = 2 V to VCC 5
Low-level input current (D, DE) IIL 0 10 µA VIL = GND to 0.8 V 5
High-impedance state output current (driver only) IOZ -15 10 µA -1.4 V ≤ (VY or VZ) ≤ 3.8 V, Other output = 1.2 V 5
Power-off output current IO(OFF) -10 10 µA -1.4 V ≤ (VY or VZ) ≤ 3.8 V, Other output = 1.2 V, 0 V ≤ VCC ≤ 1.5 V 5
High-level output voltage (R) VOH 2.4 V IOH = -8 mA 6
Low-level output voltage (R) VOL 0.4 V IOL = 8 mA 6
High-level input current (RE) IIH -10 0 µA VIH = 2 V to VCC 6
Low-level input current (RE) IIL -10 0 µA VIL = GND to 0.8 V 6
High-impedance output current (R) IOZ -10 15 µA VO = 0 V or 3.6 V 6
Receiver or transceiver with driver disabled input current (IA) IA 0 32 µA VA = 3.8 V, VB = 1.2 V 6
Receiver or transceiver with driver disabled input current (IA) IA -20 20 µA VA = 0 V or 2.4 V, VB = 1.2 V 6
Receiver or transceiver with driver disabled input current (IA) IA -32 0 µA VA = -1.4 V, VB = 1.2 V 6
Receiver or transceiver with driver disabled input current (IB) IB 0 32 µA VB = 3.8 V, VA = 1.2 V 6
Receiver or transceiver with driver disabled input current (IB) IB -20 20 µA VB = 0 V or 2.4 V, VA = 1.2 V 6
Receiver or transceiver with driver disabled input current (IB) IB -32 0 µA VB = -1.4 V, VA = 1.2 V 6
Receiver or transceiver with driver disabled differential input current (IA, IB) IAB -4 4 µA VA = VB, 1.4 ≤ VA ≤ 3.8 V 6
Propagation delay time, low-to-high-level output (driver) tpLH 2 2.5 3.5 ns See Figure 7-5 7
Propagation delay time, high-to-low-level output (driver) tpHL 2 2.5 3.5 ns See Figure 7-5 7
Differential output signal rise time tr 2 2.6 3.2 ns 7
Differential output signal fall time tf 2 2.6 3.2 ns 7
Disable time, high-level-to-high-impedance output (driver) tPHZ 4 7 ns See Figure 7-6 7
Disable time, low-level-to-high-impedance output (driver) tPLZ 4 7 ns See Figure 7-6 7
Enable time, high-impedance-to-high-level output (driver) tPZH 4 7 ns See Figure 7-6 7
Enable time, high-impedance-to-low-level output (driver) tPZL 4 7 ns See Figure 7-6 7
Propagation delay time, low-to-high-level output (receiver) tPLH 2 3.6 6 ns CL = 15 pF, See Figure 7-10 7
Propagation delay time, high-to-low-level output (receiver) tPHL 2 3.6 6 ns CL = 15 pF, See Figure 7-10 7
Pulse skew (/tpHL, tpLH/) Type 1 tsk(p) 100 300 ps Type 1 7
Disable time, high-level-to-high-impedance output (receiver) tPHZ 6 10 ns See Figure 7-11 8
Disable time, low-level-to-high-impedance output (receiver) tPLZ 6 10 ns See Figure 7-11 8
Enable time, high-impedance-to-high-level output (receiver) tPZH 10 15 ns See Figure 7-11 8
Enable time, high-impedance-to-low-level output (receiver) tPZL 10 15 ns See Figure 7-11 8
Junction-to-ambient thermal resistance (D SOIC 8 pins) RθJA 103.9 °C/W 5
Junction-to-case (top) thermal resistance (D SOIC 8 pins) RθJC(top) 50.6 °C/W 5
Junction-to-board thermal resistance (D SOIC 8 pins) RθJB 44.5 °C/W 5

CAD (KiCad official)

  • Symbol: SN65MLVD200ADR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: sn65mlvd200adr-etched.step / sn65mlvd200adr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn65mlvd200adr.step / sn65mlvd200adr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (42 pp, sha256 7a0e2e37b09cf486, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF