Generated by kicad-footprint-generator · KiCad file format 20260206
SN65MLVD200ADR
Texas Instruments · LVDS ICs · SOIC-8
SN65MLVD200ADR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | R | output | Receiver output; this pin is driven by the receiver and is the logic output of the differential input. |
| 2 | RE | input | Receiver enable pin: High disables the receiver and Low enables it, with logic inputs rated -0.5 V to 4 V absolute maximum. |
| 3 | DE | input | Driver enable pin: High enables the driver and Low disables it, with logic inputs rated -0.5 V to 4 V absolute maximum. |
| 4 | D | input | Driver data input with VIH of 2 V minimum and VIL of 0.8 V maximum, rated -0.5 V to 4 V absolute maximum. |
| 5 | GND | power_in | Network ground terminal; all voltages except differential bus voltages are referenced to this pin. |
| 6 | A | bidirectional | Non-inverting differential bus I/O with ESD protection of ±8000 V HBM and absolute voltage limits of -1.8 V to 4 V for the SN65MLVD200A. |
| 7 | B | bidirectional | Inverting differential bus I/O with ESD protection of ±8000 V HBM and absolute voltage limits of -1.8 V to 4 V for the SN65MLVD200A. |
| 8 | VCC | power_in | Power supply input, 3.0 V minimum to 3.6 V maximum with 3.3 V nominal, and absolute maximum of 4 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 4 | V | 4 | ||
| Input voltage (D, DE, RE) | -0.5 | 4 | V | 4 | |||
| Input voltage (A, B) SN65MLVD200A variant | -1.8 | 4 | V | SN65MLVD200A and SN65MLVD204A | 4 | ||
| Output voltage (R) | -0.3 | 4 | V | 4 | |||
| Output voltage (Y, Z, A, or B) | -1.8 | 4 | V | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | 4 | |
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Voltage at any bus terminal VA, VB, VY or VZ | -1.4 | 3.8 | V | 4 | |||
| Differential load resistance | RL | 30 | 50 | Ω | 4 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 4 | ||
| Supply current, driver only | ICC | 13 | 22 | mA | RE and DE at VCC, RL = 50 Ω, All others open | 5 | |
| Supply current, both disabled | ICC | 1 | 4 | mA | RE at VCC, DE at 0 V, RL = No Load, All others open | 5 | |
| Supply current, both enabled | ICC | 16 | 24 | mA | RE at 0 V, DE at VCC, RL = 50 Ω, All others open | 5 | |
| Supply current, receiver only | ICC | 4 | 13 | mA | RE at 0 V, DE at 0 V, All others open | 5 | |
| Differential output voltage magnitude | /VAB/ or /VYZ/ | 480 | 650 | mV | See Figure 7-2 | 5 | |
| Change in differential output voltage magnitude between logic states | Δ/VAB/ or Δ/VYZ/ | -50 | 50 | mV | 5 | ||
| Steady-state common-mode output voltage | VOS(SS) | 0.8 | 1.2 | V | See Figure 7-3 | 5 | |
| Change in steady-state common-mode output voltage between logic states | ΔVOS(SS) | -50 | 50 | mV | 5 | ||
| Peak-to-peak common-mode output voltage | VOS(PP) | 150 | mV | 5 | |||
| Maximum steady-state open-circuit output voltage (Y or A) | VY(OC) or VA(OC) | 0 | 2.4 | V | See Figure 7-7 | 5 | |
| Maximum steady-state open-circuit output voltage (Z or B) | VZ(OC) or VB(OC) | 0 | 2.4 | V | See Figure 7-7 | 5 | |
| Voltage overshoot, low-to-high level output | VP(H) | 1.2 | V | Relative to VSS, See Figure 7-5 | 5 | ||
| Voltage overshoot, high-to-low level output | VP(L) | -0.2 | V | Relative to VSS, See Figure 7-5 | 5 | ||
| High-level input current (D, DE) | IIH | 0 | 10 | µA | VIH = 2 V to VCC | 5 | |
| Low-level input current (D, DE) | IIL | 0 | 10 | µA | VIL = GND to 0.8 V | 5 | |
| High-impedance state output current (driver only) | IOZ | -15 | 10 | µA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, Other output = 1.2 V | 5 | |
| Power-off output current | IO(OFF) | -10 | 10 | µA | -1.4 V ≤ (VY or VZ) ≤ 3.8 V, Other output = 1.2 V, 0 V ≤ VCC ≤ 1.5 V | 5 | |
| High-level output voltage (R) | VOH | 2.4 | V | IOH = -8 mA | 6 | ||
| Low-level output voltage (R) | VOL | 0.4 | V | IOL = 8 mA | 6 | ||
| High-level input current (RE) | IIH | -10 | 0 | µA | VIH = 2 V to VCC | 6 | |
| Low-level input current (RE) | IIL | -10 | 0 | µA | VIL = GND to 0.8 V | 6 | |
| High-impedance output current (R) | IOZ | -10 | 15 | µA | VO = 0 V or 3.6 V | 6 | |
| Receiver or transceiver with driver disabled input current (IA) | IA | 0 | 32 | µA | VA = 3.8 V, VB = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled input current (IA) | IA | -20 | 20 | µA | VA = 0 V or 2.4 V, VB = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled input current (IA) | IA | -32 | 0 | µA | VA = -1.4 V, VB = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled input current (IB) | IB | 0 | 32 | µA | VB = 3.8 V, VA = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled input current (IB) | IB | -20 | 20 | µA | VB = 0 V or 2.4 V, VA = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled input current (IB) | IB | -32 | 0 | µA | VB = -1.4 V, VA = 1.2 V | 6 | |
| Receiver or transceiver with driver disabled differential input current (IA, IB) | IAB | -4 | 4 | µA | VA = VB, 1.4 ≤ VA ≤ 3.8 V | 6 | |
| Propagation delay time, low-to-high-level output (driver) | tpLH | 2 | 2.5 | 3.5 | ns | See Figure 7-5 | 7 |
| Propagation delay time, high-to-low-level output (driver) | tpHL | 2 | 2.5 | 3.5 | ns | See Figure 7-5 | 7 |
| Differential output signal rise time | tr | 2 | 2.6 | 3.2 | ns | 7 | |
| Differential output signal fall time | tf | 2 | 2.6 | 3.2 | ns | 7 | |
| Disable time, high-level-to-high-impedance output (driver) | tPHZ | 4 | 7 | ns | See Figure 7-6 | 7 | |
| Disable time, low-level-to-high-impedance output (driver) | tPLZ | 4 | 7 | ns | See Figure 7-6 | 7 | |
| Enable time, high-impedance-to-high-level output (driver) | tPZH | 4 | 7 | ns | See Figure 7-6 | 7 | |
| Enable time, high-impedance-to-low-level output (driver) | tPZL | 4 | 7 | ns | See Figure 7-6 | 7 | |
| Propagation delay time, low-to-high-level output (receiver) | tPLH | 2 | 3.6 | 6 | ns | CL = 15 pF, See Figure 7-10 | 7 |
| Propagation delay time, high-to-low-level output (receiver) | tPHL | 2 | 3.6 | 6 | ns | CL = 15 pF, See Figure 7-10 | 7 |
| Pulse skew (/tpHL, tpLH/) Type 1 | tsk(p) | 100 | 300 | ps | Type 1 | 7 | |
| Disable time, high-level-to-high-impedance output (receiver) | tPHZ | 6 | 10 | ns | See Figure 7-11 | 8 | |
| Disable time, low-level-to-high-impedance output (receiver) | tPLZ | 6 | 10 | ns | See Figure 7-11 | 8 | |
| Enable time, high-impedance-to-high-level output (receiver) | tPZH | 10 | 15 | ns | See Figure 7-11 | 8 | |
| Enable time, high-impedance-to-low-level output (receiver) | tPZL | 10 | 15 | ns | See Figure 7-11 | 8 | |
| Junction-to-ambient thermal resistance (D SOIC 8 pins) | RθJA | 103.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (D SOIC 8 pins) | RθJC(top) | 50.6 | °C/W | 5 | |||
| Junction-to-board thermal resistance (D SOIC 8 pins) | RθJB | 44.5 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
SN65MLVD200ADR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sn65mlvd200adr-etched.step/sn65mlvd200adr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn65mlvd200adr.step/sn65mlvd200adr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (42 pp, sha256
7a0e2e37b09cf486, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).