Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP6499-E

Microchip Tech · Operational Amplifier · SOIC-14

MCP6499-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUTA output Analog output of op amp A, a low-impedance voltage source.
2 VINA- input Inverting input of op amp A, a high-impedance CMOS input with low bias current.
3 VINA+ input Noninverting input of op amp A, a high-impedance CMOS input with low bias current.
4 VDD power_in Positive power supply, 1.8V to 5.5V above VSS, and needs bypass capacitors.
5 VINB+ input Noninverting input of op amp B, a high-impedance CMOS input with low bias current.
6 VINB- input Inverting input of op amp B, a high-impedance CMOS input with low bias current.
7 VOUTB output Analog output of op amp B, a low-impedance voltage source.
8 VOUTC output Analog output of op amp C, a low-impedance voltage source.
9 VINC- input Inverting input of op amp C, a high-impedance CMOS input with low bias current.
10 VINC+ input Noninverting input of op amp C, a high-impedance CMOS input with low bias current.
11 VSS power_in Negative power supply, connected to ground in a typical single-supply configuration.
12 VIND+ input Noninverting input of op amp D, a high-impedance CMOS input with low bias current.
13 VIND- input Inverting input of op amp D, a high-impedance CMOS input with low bias current.
14 VOUTD output Analog output of op amp D, a low-impedance voltage source.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS -1.6 1.6 mV TA=+25°C, VDD=1.8V to 5.5V, VCM=VDD/4 2
Power Supply Rejection Ratio PSRR 82 100 dB 2
Common Mode Input Voltage Range VCMR -0.3 0.3 V VSS-0.3 to VDD+0.3 (relative to rails) 2
Common Mode Input Voltage Range (hot/cold) VCMR -0.1 0.1 V VSS-0.1 to VDD+0.1, TA=-40°C to +125°C, guaranteed by characterization 2
Common Mode Rejection Ratio CMRR 66 92 dB VDD=5.5V, VCM=-0.3V to 5.8V 2
DC Open-Loop Gain AOL 105 130 dB 0.2 < VOUT < (VDD-0.2V) 3
High-Level Output Voltage (RL=10k) VOH -10 -3.5 mV VDD=5.5V, RL=10 kΩ; printed as VDD-10 / VDD-3.5 3
High-Level Output Voltage (RL=1k) VOH -50 -30 mV VDD=5.5V, RL=1 kΩ; printed as VDD-50 / VDD-30 3
Low-Level Output Voltage (RL=10k) VOL 3.5 10 mV VDD=5.5V, RL=10 kΩ; printed as VSS+3.5 / VSS+10 3
Low-Level Output Voltage (RL=1k) VOL 30 50 mV VDD=5.5V, RL=1 kΩ; printed as VSS+30 / VSS+50 3
Supply Voltage VDD 1.8 5.5 V 3
Quiescent Current per Amplifier IQ 2 2.5 mA IO=0 3
Operating Temperature Range TA -40 125 °C Note 1: TJ must not exceed +150°C 4
Storage Temperature Range TA -65 150 °C 4
Supply Voltage VDD - VSS VDD, VSS 6 V 2
Current at Analog Input Pins VIN+, VIN- -5 5 mA 2
Analog Input Voltage VIN+, VIN- -0.5 0.5 V VSS, 0.5V to VDD + 0.5V (offsets relative to rails) 2
Analog Output Voltage VOUT -0.3 0.3 V VSS, 0.3V to VDD + 0.3V (offsets relative to rails) 2
Maximum Junction Temperature TJ 150 °C 2
ESD Protection HBM 4 kV All pins, HBM 2
ESD Protection CDM 2 kV All pins, CDM 2
ESD Protection MM 200 V All pins, MM 2
Thermal Resistance, 14L-SOIC θJA 120 °C/W 4
Input Offset Drift with Temperature ΔVOS/ΔTA 0.6 µV/°C TA=-40°C to +125°C, printed ±0.6 2
Input Bias Current IB 1 pA printed ±1 2
Input Bias Current IB 19 pA TA=+85°C 2
Input Bias Current IB 200 pA TA=+125°C 2
Input Offset Current IOS 1 pA printed ±1 2
Output Short-Circuit Current, source ISC 55 mA VDD=5.5V, source, printed ±55 3
Output Short-Circuit Current, sink ISC 45 mA VDD=5.5V, sink, printed ±45 3
Gain Bandwidth Product GBWP 30 MHz 3
Phase Margin PM 53 ° G=+1 V/V 3
Slew Rate SR 40 V/µs VDD=5.5V 3
Startup Time tstart 2 µs VDD=0V to 5.5V 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 29

CAD (KiCad official)

  • Symbol: MCP6499-E
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: mcp6499-e-etched.step / mcp6499-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp6499-e.step / mcp6499-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (46 pp, sha256 3922358a7dcfb26f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF