Generated by kicad-footprint-generator · KiCad file format 20260206
MCP6499-E
Microchip Tech · Operational Amplifier · SOIC-14
MCP6499-E from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUTA | output | Analog output of op amp A, a low-impedance voltage source. |
| 2 | VINA- | input | Inverting input of op amp A, a high-impedance CMOS input with low bias current. |
| 3 | VINA+ | input | Noninverting input of op amp A, a high-impedance CMOS input with low bias current. |
| 4 | VDD | power_in | Positive power supply, 1.8V to 5.5V above VSS, and needs bypass capacitors. |
| 5 | VINB+ | input | Noninverting input of op amp B, a high-impedance CMOS input with low bias current. |
| 6 | VINB- | input | Inverting input of op amp B, a high-impedance CMOS input with low bias current. |
| 7 | VOUTB | output | Analog output of op amp B, a low-impedance voltage source. |
| 8 | VOUTC | output | Analog output of op amp C, a low-impedance voltage source. |
| 9 | VINC- | input | Inverting input of op amp C, a high-impedance CMOS input with low bias current. |
| 10 | VINC+ | input | Noninverting input of op amp C, a high-impedance CMOS input with low bias current. |
| 11 | VSS | power_in | Negative power supply, connected to ground in a typical single-supply configuration. |
| 12 | VIND+ | input | Noninverting input of op amp D, a high-impedance CMOS input with low bias current. |
| 13 | VIND- | input | Inverting input of op amp D, a high-impedance CMOS input with low bias current. |
| 14 | VOUTD | output | Analog output of op amp D, a low-impedance voltage source. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -1.6 | 1.6 | mV | TA=+25°C, VDD=1.8V to 5.5V, VCM=VDD/4 | 2 | |
| Power Supply Rejection Ratio | PSRR | 82 | 100 | dB | 2 | ||
| Common Mode Input Voltage Range | VCMR | -0.3 | 0.3 | V | VSS-0.3 to VDD+0.3 (relative to rails) | 2 | |
| Common Mode Input Voltage Range (hot/cold) | VCMR | -0.1 | 0.1 | V | VSS-0.1 to VDD+0.1, TA=-40°C to +125°C, guaranteed by characterization | 2 | |
| Common Mode Rejection Ratio | CMRR | 66 | 92 | dB | VDD=5.5V, VCM=-0.3V to 5.8V | 2 | |
| DC Open-Loop Gain | AOL | 105 | 130 | dB | 0.2 < VOUT < (VDD-0.2V) | 3 | |
| High-Level Output Voltage (RL=10k) | VOH | -10 | -3.5 | mV | VDD=5.5V, RL=10 kΩ; printed as VDD-10 / VDD-3.5 | 3 | |
| High-Level Output Voltage (RL=1k) | VOH | -50 | -30 | mV | VDD=5.5V, RL=1 kΩ; printed as VDD-50 / VDD-30 | 3 | |
| Low-Level Output Voltage (RL=10k) | VOL | 3.5 | 10 | mV | VDD=5.5V, RL=10 kΩ; printed as VSS+3.5 / VSS+10 | 3 | |
| Low-Level Output Voltage (RL=1k) | VOL | 30 | 50 | mV | VDD=5.5V, RL=1 kΩ; printed as VSS+30 / VSS+50 | 3 | |
| Supply Voltage | VDD | 1.8 | 5.5 | V | 3 | ||
| Quiescent Current per Amplifier | IQ | 2 | 2.5 | mA | IO=0 | 3 | |
| Operating Temperature Range | TA | -40 | 125 | °C | Note 1: TJ must not exceed +150°C | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Supply Voltage VDD - VSS | VDD, VSS | 6 | V | 2 | |||
| Current at Analog Input Pins | VIN+, VIN- | -5 | 5 | mA | 2 | ||
| Analog Input Voltage | VIN+, VIN- | -0.5 | 0.5 | V | VSS, 0.5V to VDD + 0.5V (offsets relative to rails) | 2 | |
| Analog Output Voltage | VOUT | -0.3 | 0.3 | V | VSS, 0.3V to VDD + 0.3V (offsets relative to rails) | 2 | |
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| ESD Protection HBM | 4 | kV | All pins, HBM | 2 | |||
| ESD Protection CDM | 2 | kV | All pins, CDM | 2 | |||
| ESD Protection MM | 200 | V | All pins, MM | 2 | |||
| Thermal Resistance, 14L-SOIC | θJA | 120 | °C/W | 4 | |||
| Input Offset Drift with Temperature | ΔVOS/ΔTA | 0.6 | µV/°C | TA=-40°C to +125°C, printed ±0.6 | 2 | ||
| Input Bias Current | IB | 1 | pA | printed ±1 | 2 | ||
| Input Bias Current | IB | 19 | pA | TA=+85°C | 2 | ||
| Input Bias Current | IB | 200 | pA | TA=+125°C | 2 | ||
| Input Offset Current | IOS | 1 | pA | printed ±1 | 2 | ||
| Output Short-Circuit Current, source | ISC | 55 | mA | VDD=5.5V, source, printed ±55 | 3 | ||
| Output Short-Circuit Current, sink | ISC | 45 | mA | VDD=5.5V, sink, printed ±45 | 3 | ||
| Gain Bandwidth Product | GBWP | 30 | MHz | 3 | |||
| Phase Margin | PM | 53 | ° | G=+1 V/V | 3 | ||
| Slew Rate | SR | 40 | V/µs | VDD=5.5V | 3 | ||
| Startup Time | tstart | 2 | µs | VDD=0V to 5.5V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm (.150 In.) Body [SOIC] A A2 | 29 |
CAD (KiCad official)
- Symbol:
MCP6499-E - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mcp6499-e-etched.step/mcp6499-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp6499-e.step/mcp6499-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (46 pp, sha256
3922358a7dcfb26f, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).