3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPMS132B-S08
PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
PMS132B-S08 from PADAUK Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD/AVDD | power_in | Positive supply for the digital core (VDD) and the ADC (AVDD), which are bonded together internally and share this one external pin; operating range 2.2V to 5.5V. |
| 2 | PA6/X2 | bidirectional | Port A bit 6, programmable as input or output with weak pull-up, or the X2 pin for an external crystal; disable the digital input with padier bit 6 when used for the crystal to reduce leakage. |
| 3 | PA5/PRSTB/PG2PWM | bidirectional | Port A bit 5 as input or open-drain output with no pull-up or pull-down resistor, hardware reset input (PRSTB), or PWMG2 11-bit PWM output; a 33 ohm series resistor is advised when used as input in noisy systems. |
| 4 | PB7/AD7/CIN5-/TM3PWM/PG1PWM | bidirectional | Port B bit 7, programmable as input or output with weak pull-up, also ADC analog input channel 7, comparator negative input 5, Timer3 PWM output, or PWMG1 11-bit PWM output; disable the digital input with pbdier bit 7 when used as an analog input. |
| 5 | PB1/AD1/Vref | bidirectional | Port B bit 1, programmable as input or output with weak pull-up, also ADC analog input channel 1 or the external ADC high reference voltage; disable the digital input with pbdier bit 1 when used as an analog input. |
| 6 | PA3/AD8/CIN0-/TW2PWM/PG2PWM | bidirectional | Port A bit 3, programmable as input or output with weak pull-up, also ADC analog input channel 8, comparator 0 negative input, Timer2 PWM output, or PWMG2 11-bit PWM output; disable the digital input with padier bit 3 when used as an analog input. |
| 7 | PA4/AD9/CIN+/CIN-/INT1A/PG1PWM | bidirectional | Port A bit 4, programmable as input or output with weak pull-up, also ADC analog input channel 9, comparator positive or negative input, external interrupt 1A (rising or falling edge selectable), or PWMG1 11-bit PWM output; disable the digital input with padier bit 4 when used as an analog input. |
| 8 | GND/AGND | power_in | Ground for the digital core (GND) and the ADC (AGND), which are bonded together internally and share this one external pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PADAUK Tech |
| Package | SOIC-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating supply voltage VDD | VDD | 2.2 | 5 | 5.5 | V | * 受限于 LVR 公差 | 17 |
| LVR accuracy | LVR% | -5 | 5 | 5 | % | 17 | |
| Input low voltage PA5 | VIL | 0 | 0.1 | VDD | PA5 | 17 | |
| Input low voltage other IO | VIL | 0 | 0.2 | VDD | 其他 IO 口 | 17 | |
| Input high voltage PA5 | VIH | 0.8 | 1 | VDD | PA5 | 17 | |
| Input high voltage other IO | VIH | 0.7 | 1 | VDD | 其他 IO 口 | 17 | |
| Input voltage | VIN | -0.3 | V | max VDD +0.3 V | 17 | ||
| Pin input current | IINJ (PIN) | 1 | mA | VDD +0.3≧VIN≧ -0.3 | 17 | ||
| Band-gap reference voltage | VBG | 1.145 | 1.2 | 1.255 | V | VDD =2.2V ~ 5.5V, -20oC<Ta<70oC* | 17 |
| Calibrated IHRC frequency | fIHRC | 15.76 | 16 | 16.24 | MHz | 25oC, VDD =2.2V~5.5V | 17 |
| Calibrated IHRC frequency | fIHRC | 15.2 | 16 | 16.8 | MHz | VDD =2.2V~5.5V, 0oC<Ta<70oC* | 17 |
| Interrupt pulse width | tINT | 30 | ns | VDD = 5.0V | 17 | ||
| Comparator input offset voltage | CPos | 10 | 20 | mV | *这些参数是设计参考值,并不是每个芯片测试。 | 18 | |
| Comparator common mode input | CPcm | 0 | 1.5 | V | VDD-1.5 V maximum | 17 | |
| ADC operating voltage | VADC | 2.2 | V | VDD upper limit | 18 | ||
| AD input voltage | VAD | 0 | V | VDD upper limit | 18 | ||
| ADC reference high voltage 4V | VREFH | 3.9 | 4 | 4.1 | V | @ VDD =5V, 25 oC | 18 |
| ADC reference high voltage 3V | VREFH | 2.93 | 3 | 3.07 | V | @ VDD =5V, 25 oC | 18 |
| ADC reference high voltage 2V | VREFH | 1.95 | 2 | 2.05 | V | @ VDD =5V, 25 oC | 18 |
| Data memory retention voltage | VDR | 1.5 | V | 待机模式下 | 18 | ||
| Supply voltage absolute range | 2.2 | 5.5 | V | 电源电压 | 18 | ||
| Operating temperature | -20 | 70 | oC | 工作稳定 | 18 | ||
| Node temperature | 150 | °C | 节点温度 | 18 | |||
| Storage temperature | -50 | 125 | °C | 存储温度 | 18 |
CAD (KiCad official)
- Symbol:
PMS132B-S08 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pms132b-s08-etched.step/pms132b-s08-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pms132b-s08.step/pms132b-s08.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PADAUK Tech datasheet (95 pp, sha256
7a5142e26d48d3e4, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).