Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PMS132B-S08

PADAUK Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8

PMS132B-S08 from PADAUK Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD/AVDD power_in Positive supply for the digital core (VDD) and the ADC (AVDD), which are bonded together internally and share this one external pin; operating range 2.2V to 5.5V.
2 PA6/X2 bidirectional Port A bit 6, programmable as input or output with weak pull-up, or the X2 pin for an external crystal; disable the digital input with padier bit 6 when used for the crystal to reduce leakage.
3 PA5/PRSTB/PG2PWM bidirectional Port A bit 5 as input or open-drain output with no pull-up or pull-down resistor, hardware reset input (PRSTB), or PWMG2 11-bit PWM output; a 33 ohm series resistor is advised when used as input in noisy systems.
4 PB7/AD7/CIN5-/TM3PWM/PG1PWM bidirectional Port B bit 7, programmable as input or output with weak pull-up, also ADC analog input channel 7, comparator negative input 5, Timer3 PWM output, or PWMG1 11-bit PWM output; disable the digital input with pbdier bit 7 when used as an analog input.
5 PB1/AD1/Vref bidirectional Port B bit 1, programmable as input or output with weak pull-up, also ADC analog input channel 1 or the external ADC high reference voltage; disable the digital input with pbdier bit 1 when used as an analog input.
6 PA3/AD8/CIN0-/TW2PWM/PG2PWM bidirectional Port A bit 3, programmable as input or output with weak pull-up, also ADC analog input channel 8, comparator 0 negative input, Timer2 PWM output, or PWMG2 11-bit PWM output; disable the digital input with padier bit 3 when used as an analog input.
7 PA4/AD9/CIN+/CIN-/INT1A/PG1PWM bidirectional Port A bit 4, programmable as input or output with weak pull-up, also ADC analog input channel 9, comparator positive or negative input, external interrupt 1A (rising or falling edge selectable), or PWMG1 11-bit PWM output; disable the digital input with padier bit 4 when used as an analog input.
8 GND/AGND power_in Ground for the digital core (GND) and the ADC (AGND), which are bonded together internally and share this one external pin.

Key specifications

Parameter Value
Manufacturer PADAUK Tech
Package SOIC-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating supply voltage VDD VDD 2.2 5 5.5 V * 受限于 LVR 公差 17
LVR accuracy LVR% -5 5 5 % 17
Input low voltage PA5 VIL 0 0.1 VDD PA5 17
Input low voltage other IO VIL 0 0.2 VDD 其他 IO 口 17
Input high voltage PA5 VIH 0.8 1 VDD PA5 17
Input high voltage other IO VIH 0.7 1 VDD 其他 IO 口 17
Input voltage VIN -0.3 V max VDD +0.3 V 17
Pin input current IINJ (PIN) 1 mA VDD +0.3≧VIN≧ -0.3 17
Band-gap reference voltage VBG 1.145 1.2 1.255 V VDD =2.2V ~ 5.5V, -20oC<Ta<70oC* 17
Calibrated IHRC frequency fIHRC 15.76 16 16.24 MHz 25oC, VDD =2.2V~5.5V 17
Calibrated IHRC frequency fIHRC 15.2 16 16.8 MHz VDD =2.2V~5.5V, 0oC<Ta<70oC* 17
Interrupt pulse width tINT 30 ns VDD = 5.0V 17
Comparator input offset voltage CPos 10 20 mV *这些参数是设计参考值,并不是每个芯片测试。 18
Comparator common mode input CPcm 0 1.5 V VDD-1.5 V maximum 17
ADC operating voltage VADC 2.2 V VDD upper limit 18
AD input voltage VAD 0 V VDD upper limit 18
ADC reference high voltage 4V VREFH 3.9 4 4.1 V @ VDD =5V, 25 oC 18
ADC reference high voltage 3V VREFH 2.93 3 3.07 V @ VDD =5V, 25 oC 18
ADC reference high voltage 2V VREFH 1.95 2 2.05 V @ VDD =5V, 25 oC 18
Data memory retention voltage VDR 1.5 V 待机模式下 18
Supply voltage absolute range 2.2 5.5 V 电源电压 18
Operating temperature -20 70 oC 工作稳定 18
Node temperature 150 °C 节点温度 18
Storage temperature -50 125 °C 存储温度 18

CAD (KiCad official)

  • Symbol: PMS132B-S08
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: pms132b-s08-etched.step / pms132b-s08-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pms132b-s08.step / pms132b-s08.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PADAUK Tech datasheet (95 pp, sha256 7a5142e26d48d3e4, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF