component
STM32L071CZU6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32L071CZU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32L071CZU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main supply pin; the family supply range is 1.65 V to 3.6 V, while orderable parts without the 'D' option are specified at 1.8 V to 3.6 V with BOR enabled. |
| 2 | PC13 | bidirectional | 5 V tolerant FT I/O (additional function RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2); like all I/Os it is a floating input during and after reset unless noted. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant FT I/O whose additional function is OSC32_IN, the 32.768 kHz LSE oscillator input. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V TC I/O whose additional function is OSC32_OUT, the 32.768 kHz LSE oscillator output. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V TC I/O whose additional function is OSC_IN, the 1 to 25 MHz HSE crystal oscillator input. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V TC I/O whose additional function is OSC_OUT, the 1 to 25 MHz HSE crystal oscillator output. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground pin for the ADC, comparators and reference circuitry. |
| 9 | VDDA | power_in | Analog supply pin for the ADC, comparators and internal reference. |
| 10 | PA0 | bidirectional | I/O with structure printed as TTa; alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX, COMP1_OUT; additional functions COMP1_INM, ADC_IN0, RTC_TAMP2/WKUP1. |
| 11 | PA1 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR, USART4_RX; additional functions COMP1_INP, ADC_IN1. |
| 12 | PA2 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX, COMP2_OUT; additional functions COMP2_INM, ADC_IN2. |
| 13 | PA3 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM21_CH2, TIM2_CH4, USART2_RX, LPUART1_RX; additional functions COMP2_INP, ADC_IN3. |
| 14 | PA4 | bidirectional | Standard 3.3 V TC I/O; alternate functions SPI1_NSS, USART2_CK, TIM22_ETR; additional functions COMP1_INM, COMP2_INM, ADC_IN4. |
| 15 | PA5 | bidirectional | Standard 3.3 V TC I/O; alternate functions SPI1_SCK, TIM2_ETR, TIM2_CH1; additional functions COMP1_INM, COMP2_INM, ADC_IN5. |
| 16 | PA6 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT, COMP1_OUT; additional function ADC_IN6. |
| 17 | PA7 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT, COMP2_OUT; additional function ADC_IN7. |
| 18 | PB0 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, TIM3_CH3; additional functions ADC_IN8 and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM3_CH4, LPUART1_RTS/LPUART1_DE; additional functions ADC_IN9 and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant FT I/O; alternate functions LPTIM1_OUT and I2C3_SMBA. |
| 21 | PB10 | bidirectional | 5 V tolerant FT I/O; alternate functions TIM2_CH3, LPUART1_TX, SPI2_SCK, I2C2_SCL, LPUART1_RX. |
| 22 | PB11 | bidirectional | 5 V tolerant FT I/O; alternate functions EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA, LPUART1_TX. |
| 23 | VSS | power_in | Ground pin for the digital supply domain. |
| 24 | VDD | power_in | Digital supply pin; see pin 1 for the supply range. |
| 25 | PB12 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, I2C2_SMBA, EVENTOUT. |
| 26 | PB13 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions SPI2_SCK/I2S2_CK, MCO, LPUART1_CTS, I2C2_SCL, TIM21_CH1. |
| 27 | PB14 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS/LPUART1_DE, I2C2_SDA, TIM21_CH2. |
| 28 | PB15 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI2_MOSI/I2S2_SD and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions MCO, EVENTOUT, USART1_CK, I2C3_SCL. |
| 30 | PA9 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions MCO, USART1_TX, I2C1_SCL, I2C3_SMBA. |
| 31 | PA10 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions USART1_RX and I2C1_SDA. |
| 32 | PA11 | bidirectional | 5 V tolerant FT I/O supplied by VDDIO2; alternate functions SPI1_MISO, EVENTOUT, USART1_CTS, COMP1_OUT. |
| 33 | PA12 | bidirectional | 5 V tolerant FT I/O supplied by VDDIO2; alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE, COMP2_OUT. |
| 34 | PA13 | bidirectional | 5 V tolerant FT I/O; alternate functions SWDIO (serial wire debug data) and LPUART1_RX. |
| 35 | VSS | power_in | Ground pin for the digital supply domain. |
| 36 | VDDIO2 | power_in | Supply pin for the PA11 and PA12 I/Os, per the datasheet note on the pinout figures. |
| 37 | PA14 | bidirectional | 5 V tolerant FT I/O; alternate functions SWCLK (serial wire debug clock), USART2_TX, LPUART1_TX. |
| 38 | PA15 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1, USART4_RTS/USART4_DE. |
| 39 | PB3 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE, USART5_TX; additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX, I2C3_SDA; additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant FT I/O; alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK, USART5_RTS/USART5_DE; additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR; additional function COMP2_INP. |
| 43 | PB7 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2, USART4_CTS; additional functions COMP2_INP and VREF_PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode selection pin (type I, no alternate functions listed). |
| 45 | PB8 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate function I2C1_SCL. |
| 46 | PB9 | bidirectional | 5 V tolerant FTf I/O (Fm+ capable); alternate functions EVENTOUT, I2C1_SDA, SPI2_NSS/I2S2_WS. |
| 47 | VSS | power_in | Ground pin for the digital supply domain. |
| 48 | VDD | power_in | Digital supply pin; see pin 1 for the supply range. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
CAD (KiCad official)
- Symbol:
STM32L071CZU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l071czu6-etched.step/stm32l071czu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l071czu6.step/stm32l071czu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (148 pp, sha256
f413c7ce36b98e6c, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).