Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM3880MFX-1AB

Texas Instruments · Monitors & Reset Circuits · SOT-23-6

LM3880MFX-1AB from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VCC power_in Input supply pin, operated from 2.7 V to 5.5 V (VCC to GND), and should be placed as close as possible to the input supply; a 0.1 µF ceramic capacitor may be used to bypass noise when noise is present on VCC.
2 GND power_in Ground reference for the device, and the reference for the VCC supply range of 2.7 V to 5.5 V.
3 EN input Precision enable input with an internal comparator referenced to the 1.25 V bandgap, with a threshold of 1.0 V to 1.4 V, and the absolute range is -0.3 V to VCC + 0.3 V; it is recommended not to tie EN directly to VCC.
4 FLAG3 output Open-drain output 3 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA.
5 FLAG2 output Open-drain output 2 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA.
6 FLAG1 output Open-drain output 1 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent current IQ 25 80 µA 5
FLAGx leakage current IFLAG 1 20 nA VFLAGx = 3.3V 5
FLAGx low-level output voltage VOL 0.4 V IFLAGx = 1.2mA 5
Timer delay 1 accuracy td1 -15 15 % 所有其他时序选项 5
Timer delay 2 accuracy td2 -15 15 % 所有其他时序选项 5
Timer delay 3 accuracy td3 -15 15 % 所有其他时序选项 5
Timer delay 4 accuracy td4 -15 15 % 所有其他时序选项 5
Timer delay 5 accuracy td5 -15 15 % 所有其他时序选项 5
Timer delay 6 accuracy td6 -15 15 % 所有其他时序选项 5
Timing delay error rate (td(x), 400µs)/td(x+1) 95 105 % 对于 x = 1 或 4 5
Timing delay rate td(x)/td(x+1) 95 105 % 对于 x = 2 或 5 5
EN pin threshold VEN 1 1.25 1.4 V 5
EN pin pull-up current IEN 7 µA VEN = 0V 5
VCC supply voltage VCC -0.3 6 V 4
EN, FLAG1, FLAG2, FLAG3 voltage -0.3 6 V 4
FLAG on maximum output current 50 mA 4
Maximum junction temperature 150 °C 4
Lead temperature (soldering) 260 °C 焊接时,5s 4
Storage temperature Tstg -65 150 °C 4
VCC to GND supply voltage VCC 2.7 5.5 V 4
EN, FLAG1, FLAG2, FLAG3 voltage -0.3 V 4
Junction temperature -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 187.6 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 127.4 °C/W 4
Junction-to-board thermal resistance RθJB 31.5 °C/W 4
Junction-to-top characterization parameter ψJT 23.3 °C/W 4
Junction-to-board characterization parameter ψJB 31 °C/W 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM3880MFX-1AB
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm3880mfx-1ab-etched.step / lm3880mfx-1ab-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm3880mfx-1ab.step / lm3880mfx-1ab.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 9b876093ccce3670, retrieved 2026-11-13, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF