Generated by kicad-footprint-generator · KiCad file format 20260206
LM3880MFX-1AB
Texas Instruments · Monitors & Reset Circuits · SOT-23-6
LM3880MFX-1AB from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Input supply pin, operated from 2.7 V to 5.5 V (VCC to GND), and should be placed as close as possible to the input supply; a 0.1 µF ceramic capacitor may be used to bypass noise when noise is present on VCC. |
| 2 | GND | power_in | Ground reference for the device, and the reference for the VCC supply range of 2.7 V to 5.5 V. |
| 3 | EN | input | Precision enable input with an internal comparator referenced to the 1.25 V bandgap, with a threshold of 1.0 V to 1.4 V, and the absolute range is -0.3 V to VCC + 0.3 V; it is recommended not to tie EN directly to VCC. |
| 4 | FLAG3 | output | Open-drain output 3 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA. |
| 5 | FLAG2 | output | Open-drain output 2 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA. |
| 6 | FLAG1 | output | Open-drain output 1 that must be pulled up externally (typically 100 kΩ), with a maximum low-level output voltage of 0.4 V at 1.2 mA, a maximum leakage of 20 nA at 3.3 V, a maximum absolute voltage of 6 V and a maximum sink current of 50 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent current | IQ | 25 | 80 | µA | 5 | ||
| FLAGx leakage current | IFLAG | 1 | 20 | nA | VFLAGx = 3.3V | 5 | |
| FLAGx low-level output voltage | VOL | 0.4 | V | IFLAGx = 1.2mA | 5 | ||
| Timer delay 1 accuracy | td1 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 2 accuracy | td2 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 3 accuracy | td3 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 4 accuracy | td4 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 5 accuracy | td5 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timer delay 6 accuracy | td6 | -15 | 15 | % | 所有其他时序选项 | 5 | |
| Timing delay error rate | (td(x), 400µs)/td(x+1) | 95 | 105 | % | 对于 x = 1 或 4 | 5 | |
| Timing delay rate | td(x)/td(x+1) | 95 | 105 | % | 对于 x = 2 或 5 | 5 | |
| EN pin threshold | VEN | 1 | 1.25 | 1.4 | V | 5 | |
| EN pin pull-up current | IEN | 7 | µA | VEN = 0V | 5 | ||
| VCC supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| EN, FLAG1, FLAG2, FLAG3 voltage | -0.3 | 6 | V | 4 | |||
| FLAG on maximum output current | 50 | mA | 4 | ||||
| Maximum junction temperature | 150 | °C | 4 | ||||
| Lead temperature (soldering) | 260 | °C | 焊接时,5s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VCC to GND supply voltage | VCC | 2.7 | 5.5 | V | 4 | ||
| EN, FLAG1, FLAG2, FLAG3 voltage | -0.3 | V | 4 | ||||
| Junction temperature | -40 | 125 | °C | 4 | |||
| Junction-to-ambient thermal resistance | RθJA | 187.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 127.4 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 31.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 23.3 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 31 | °C/W | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM3880MFX-1AB - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm3880mfx-1ab-etched.step/lm3880mfx-1ab-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm3880mfx-1ab.step/lm3880mfx-1ab.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
9b876093ccce3670, retrieved 2026-11-13, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).