Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32F429BGT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-208(28x28)

STM32F429BGT6 from STMicroelectronics, in a LQFP-208(28x28). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional GPIO port E bit 2 (FT, 5 V tolerant) with TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 alternate functions.
2 PE3 bidirectional GPIO port E bit 3 (FT) with TRACED0, SAI1_SD_B, FMC_A19 alternate functions.
3 PE4 bidirectional GPIO port E bit 4 (FT) with TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 alternate functions.
4 PE5 bidirectional GPIO port E bit 5 (FT) with TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 alternate functions.
5 PE6 bidirectional GPIO port E bit 6 (FT) with TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 alternate functions.
6 VBAT power_in Backup supply (1.65 to 3.6 V) for RTC, 32 kHz oscillator and backup registers/SRAM when VDD is absent.
7 PI8 bidirectional GPIO port I bit 8 (FT) powered via backup switch (max 3 mA, 2 MHz, 30 pF in output mode), TAMP_2 additional function.
8 PC13 bidirectional GPIO port C bit 13 (FT) powered via backup switch (max 3 mA, 2 MHz, 30 pF in output mode), TAMP_1 additional function.
9 PC14-OSC32_IN bidirectional GPIO port C bit 14 (PC14) or 32.768 kHz oscillator input OSC32_IN, powered via backup switch (max 3 mA output).
10 PC15-OSC32_OUT bidirectional GPIO port C bit 15 (PC15) or 32.768 kHz oscillator output OSC32_OUT, powered via backup switch (max 3 mA output).
11 PI9 bidirectional GPIO port I bit 9 (FT) with CAN1_RX, FMC_D30, LCD_VSYNC alternate functions.
12 PI10 bidirectional GPIO port I bit 10 (FT) with ETH_MII_RX_ER, FMC_D31, LCD_HSYNC alternate functions.
13 PI11 bidirectional GPIO port I bit 11 (FT) with OTG_HS_ULPI_DIR alternate function.
14 VSS power_in Ground supply pin.
15 VDD power_in Digital supply pin, 1.7 to 3.6 V.
16 PF0 bidirectional GPIO port F bit 0 (FT) with I2C2_SDA, FMC_A0 alternate functions.
17 PF1 bidirectional GPIO port F bit 1 (FT) with I2C2_SCL, FMC_A1 alternate functions.
18 PF2 bidirectional GPIO port F bit 2 (FT) with I2C2_SMBA, FMC_A2 alternate functions.
19 PI12 bidirectional GPIO port I bit 12 (FT) with LCD_HSYNC alternate function.
20 PI13 bidirectional GPIO port I bit 13 (FT) with LCD_VSYNC alternate function.
21 PI14 bidirectional GPIO port I bit 14 (FT) with LCD_CLK alternate function.
22 PF3 bidirectional GPIO port F bit 3 (FT) with FMC_A3 alternate function and ADC3_IN9 analog input.
23 PF4 bidirectional GPIO port F bit 4 (FT) with FMC_A4 alternate function and ADC3_IN14 analog input.
24 PF5 bidirectional GPIO port F bit 5 (FT) with FMC_A5 alternate function and ADC3_IN15 analog input.
25 VSS power_in Ground supply pin.
26 VDD power_in Digital supply pin, 1.7 to 3.6 V.
27 PF6 bidirectional GPIO port F bit 6 (FT) with TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD alternate functions and ADC3_IN4.
28 PF7 bidirectional GPIO port F bit 7 (FT) with TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG alternate functions and ADC3_IN5.
29 PF8 bidirectional GPIO port F bit 8 (FT) with SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR alternate functions and ADC3_IN6.
30 PF9 bidirectional GPIO port F bit 9 (FT) with SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD alternate functions and ADC3_IN7.
31 PF10 bidirectional GPIO port F bit 10 (FT) with FMC_INTR, DCMI_D11, LCD_DE alternate functions and ADC3_IN8.
32 PH0-OSC_IN bidirectional GPIO port H bit 0 (PH0) or main oscillator input OSC_IN (4 to 26 MHz crystal).
33 PH1-OSC_OUT bidirectional GPIO port H bit 1 (PH1) or main oscillator output OSC_OUT.
34 NRST bidirectional Bidirectional reset pin with weak pull-up resistor.
35 PC0 bidirectional GPIO port C bit 0 (FT) with OTG_HS_ULPI_STP, FMC_SDNWE alternate functions and ADC123_IN10.
36 PC1 bidirectional GPIO port C bit 1 (FT) with ETH_MDC alternate function and ADC123_IN11.
37 PC2 bidirectional GPIO port C bit 2 (FT) with SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0 alternate functions and ADC123_IN12.
38 PC3 bidirectional GPIO port C bit 3 (FT) with SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0 alternate functions and ADC123_IN13.
39 VDD power_in Digital supply pin, 1.7 to 3.6 V.
40 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
41 VREF+ power_in ADC/DAC positive reference voltage, 1.7 to 3.6 V with VREF+ ≤ VDDA.
42 VDDA power_in Analog supply (1.7 to 3.6 V) for ADC, DAC, reset block, RC and PLL; must equal VDD.
43 PA0-WKUP bidirectional GPIO PA0 (FT) with WKUP wake-up, TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS and ADC123_IN0; acts as internal reset when regulator is OFF.
44 PA1 bidirectional GPIO port A bit 1 (FT) with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/RMII_REF_CLK alternate functions and ADC123_IN1.
45 PA2 bidirectional GPIO port A bit 2 (FT) with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO alternate functions and ADC123_IN2.
46 PH2 bidirectional GPIO port H bit 2 (FT) with ETH_MII_CRS, FMC_SDCKE0, LCD_R0 alternate functions.
47 PH3 bidirectional GPIO port H bit 3 (FT) with ETH_MII_COL, FMC_SDNE0, LCD_R1 alternate functions.
48 PH4 bidirectional GPIO port H bit 4 (FT) with I2C2_SCL, OTG_HS_ULPI_NXT alternate functions.
49 PH5 bidirectional GPIO port H bit 5 (FT) with I2C2_SDA, SPI5_NSS, FMC_SDNWE alternate functions.
50 PA3 bidirectional GPIO port A bit 3 (FT) with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 alternate functions and ADC123_IN3.
51 VSS power_in Ground supply pin.
52 VDD power_in Digital supply pin, 1.7 to 3.6 V.
53 PA4 bidirectional GPIO port A bit 4 (TTa, 3.3 V tolerant) with SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC alternate functions, ADC12_IN4 and DAC_OUT1.
54 PA5 bidirectional GPIO port A bit 5 (TTa) with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK alternate functions, ADC12_IN5 and DAC_OUT2.
55 PA6 bidirectional GPIO port A bit 6 (FT) with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2 alternate functions and ADC12_IN6.
56 PA7 bidirectional GPIO port A bit 7 (FT) with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV alternate functions and ADC12_IN7.
57 PC4 bidirectional GPIO port C bit 4 (FT) with ETH_MII_RXD0/ETH_RMII_RXD0 alternate function and ADC12_IN14.
58 PC5 bidirectional GPIO port C bit 5 (FT) with ETH_MII_RXD1/ETH_RMII_RXD1 alternate function and ADC12_IN15.
59 VDD power_in Digital supply pin, 1.7 to 3.6 V.
60 VSS power_in Ground supply pin.
61 PB0 bidirectional GPIO port B bit 0 (FT) with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2 alternate functions and ADC12_IN8.
62 PB1 bidirectional GPIO port B bit 1 (FT) with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3 alternate functions and ADC12_IN9.
63 PB2-BOOT1 bidirectional GPIO port B bit 2 (FT), also used as BOOT1 boot mode selection pin.
64 PI15 bidirectional GPIO port I bit 15 (FT) with LCD_R0 alternate function.
65 PJ0 bidirectional GPIO port J bit 0 (FT) with LCD_R1 alternate function.
66 PJ1 bidirectional GPIO port J bit 1 (FT) with LCD_R2 alternate function.
67 PJ2 bidirectional GPIO port J bit 2 (FT) with LCD_R3 alternate function.
68 PJ3 bidirectional GPIO port J bit 3 (FT) with LCD_R4 alternate function.
69 PJ4 bidirectional GPIO port J bit 4 (FT) with LCD_R5 alternate function.
70 PF11 bidirectional GPIO port F bit 11 (FT) with SPI5_MOSI, FMC_SDNRAS, DCMI_D12 alternate functions.
71 PF12 bidirectional GPIO port F bit 12 (FT) with FMC_A6 alternate function.
72 VSS power_in Ground supply pin.
73 VDD power_in Digital supply pin, 1.7 to 3.6 V.
74 PF13 bidirectional GPIO port F bit 13 (FT) with FMC_A7 alternate function.
75 PF14 bidirectional GPIO port F bit 14 (FT) with FMC_A8 alternate function.
76 PF15 bidirectional GPIO port F bit 15 (FT) with FMC_A9 alternate function.
77 PG0 bidirectional GPIO port G bit 0 (FT) with FMC_A10 alternate function.
78 PG1 bidirectional GPIO port G bit 1 (FT) with FMC_A11 alternate function.
79 PE7 bidirectional GPIO port E bit 7 (FT) with TIM1_ETR, UART7_Rx, FMC_D4 alternate functions.
80 PE8 bidirectional GPIO port E bit 8 (FT) with TIM1_CH1N, UART7_Tx, FMC_D5 alternate functions.
81 PE9 bidirectional GPIO port E bit 9 (FT) with TIM1_CH1, FMC_D6 alternate functions.
82 VSS power_in Ground supply pin.
83 VDD power_in Digital supply pin, 1.7 to 3.6 V.
84 PE10 bidirectional GPIO port E bit 10 (FT) with TIM1_CH2N, FMC_D7 alternate functions.
85 PE11 bidirectional GPIO port E bit 11 (FT) with TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3 alternate functions.
86 PE12 bidirectional GPIO port E bit 12 (FT) with TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4 alternate functions.
87 PE13 bidirectional GPIO port E bit 13 (FT) with TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE alternate functions.
88 PE14 bidirectional GPIO port E bit 14 (FT) with TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK alternate functions.
89 PE15 bidirectional GPIO port E bit 15 (FT) with TIM1_BKIN, FMC_D12, LCD_R7 alternate functions.
90 PB10 bidirectional GPIO port B bit 10 (FT) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 alternate functions.
91 PB11 bidirectional GPIO port B bit 11 (FT) with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, LCD_G5 alternate functions.
92 VCAP_1 passive Internal regulator output pin requiring an external 2.2 µF ceramic capacitor (ESR < 2 Ω) to ground; external V12 input when regulator is OFF.
93 VSS power_in Ground supply pin.
94 VDD power_in Digital supply pin, 1.7 to 3.6 V.
95 PJ5 bidirectional GPIO port J bit 5 with LCD_R6 alternate function.
96 PH6 bidirectional GPIO port H bit 6 (FT) with I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8 alternate functions.
97 PH7 bidirectional GPIO port H bit 7 (FT) with I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9 alternate functions.
98 PH8 bidirectional GPIO port H bit 8 (FT) with I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2 alternate functions.
99 PH9 bidirectional GPIO port H bit 9 (FT) with I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3 alternate functions.
100 PH10 bidirectional GPIO port H bit 10 (FT) with TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4 alternate functions.
101 PH11 bidirectional GPIO port H bit 11 (FT) with TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5 alternate functions.
102 PH12 bidirectional GPIO port H bit 12 (FT) with TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6 alternate functions.
103 VDD power_in Digital supply pin, 1.7 to 3.6 V.
104 PB12 bidirectional GPIO port B bit 12 (FT) with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0, OTG_HS_ID alternate functions.
105 PB13 bidirectional GPIO port B bit 13 (FT) with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1 alternate functions and OTG_HS_VBUS.
106 PB14 bidirectional GPIO port B bit 14 (FT) with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM alternate functions.
107 PB15 bidirectional GPIO port B bit 15 (FT) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP alternate functions.
108 PD8 bidirectional GPIO port D bit 8 (FT) with USART3_TX, FMC_D13 alternate functions.
109 PD9 bidirectional GPIO port D bit 9 (FT) with USART3_RX, FMC_D14 alternate functions.
110 PD10 bidirectional GPIO port D bit 10 (FT) with USART3_CK, FMC_D15, LCD_B3 alternate functions.
111 PD11 bidirectional GPIO port D bit 11 (FT) with USART3_CTS, FMC_A16 alternate functions.
112 PD12 bidirectional GPIO port D bit 12 (FT) with TIM4_CH1, USART3_RTS, FMC_A17 alternate functions.
113 PD13 bidirectional GPIO port D bit 13 (FT) with TIM4_CH2, FMC_A18 alternate functions.
114 VSS power_in Ground supply pin.
115 VDD power_in Digital supply pin, 1.7 to 3.6 V.
116 PD14 bidirectional GPIO port D bit 14 (FT) with TIM4_CH3, FMC_D0 alternate functions.
117 PD15 bidirectional GPIO port D bit 15 (FT) with TIM4_CH4, FMC_D1 alternate functions.
118 PJ6 bidirectional GPIO port J bit 6 (FT) with LCD_R7 alternate function.
119 PJ7 bidirectional GPIO port J bit 7 (FT) with LCD_G0 alternate function.
120 PJ8 bidirectional GPIO port J bit 8 (FT) with LCD_G1 alternate function.
121 PJ9 bidirectional GPIO port J bit 9 (FT) with LCD_G2 alternate function.
122 PJ10 bidirectional GPIO port J bit 10 (FT) with LCD_G3 alternate function.
123 PJ11 bidirectional GPIO port J bit 11 (FT) with LCD_G4 alternate function.
124 VDD power_in Digital supply pin, 1.7 to 3.6 V.
125 VSS power_in Ground supply pin.
126 PK0 bidirectional GPIO port K bit 0 (FT) with LCD_G5 alternate function.
127 PK1 bidirectional GPIO port K bit 1 (FT) with LCD_G6 alternate function.
128 PK2 bidirectional GPIO port K bit 2 (FT) with LCD_G7 alternate function.
129 PG2 bidirectional GPIO port G bit 2 (FT) with FMC_A12 alternate function.
130 PG3 bidirectional GPIO port G bit 3 (FT) with FMC_A13 alternate function.
131 PG4 bidirectional GPIO port G bit 4 (FT) with FMC_A14/FMC_BA0 alternate function.
132 PG5 bidirectional GPIO port G bit 5 (FT) with FMC_A15/FMC_BA1 alternate function.
133 PG6 bidirectional GPIO port G bit 6 (FT) with FMC_INT2, DCMI_D12, LCD_R7 alternate functions.
134 PG7 bidirectional GPIO port G bit 7 (FT) with USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK alternate functions.
135 PG8 bidirectional GPIO port G bit 8 (FT) with SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK alternate functions.
136 VSS power_in Ground supply pin.
137 VDD power_in Digital supply pin, 1.7 to 3.6 V.
138 PC6 bidirectional GPIO port C bit 6 (FT) with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC alternate functions.
139 PC7 bidirectional GPIO port C bit 7 (FT) with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6 alternate functions.
140 PC8 bidirectional GPIO port C bit 8 (FT) with TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2 alternate functions.
141 PC9 bidirectional GPIO port C bit 9 (FT) with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3 alternate functions.
142 PA8 bidirectional GPIO port A bit 8 (FT) with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6 alternate functions.
143 PA9 bidirectional GPIO port A bit 9 (FT) with TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0 alternate functions and OTG_FS_VBUS.
144 PA10 bidirectional GPIO port A bit 10 (FT) with TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1 alternate functions.
145 PA11 bidirectional GPIO port A bit 11 (FT) with TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM alternate functions.
146 PA12 bidirectional GPIO port A bit 12 (FT) with TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP alternate functions.
147 PA13 bidirectional GPIO PA13 (FT), reset function JTMS-SWDIO debug interface.
148 VCAP_2 passive Internal regulator output pin requiring an external 2.2 µF ceramic capacitor (ESR < 2 Ω) to ground; external V12 input when regulator is OFF.
149 VSS power_in Ground supply pin.
150 VDD power_in Digital supply pin, 1.7 to 3.6 V.
151 PH13 bidirectional GPIO port H bit 13 (FT) with TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2 alternate functions.
152 PH14 bidirectional GPIO port H bit 14 (FT) with TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3 alternate functions.
153 PH15 bidirectional GPIO port H bit 15 (FT) with TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4 alternate functions.
154 PI0 bidirectional GPIO port I bit 0 (FT) with TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5 alternate functions.
155 PI1 bidirectional GPIO port I bit 1 (FT) with SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6 alternate functions.
156 PI2 bidirectional GPIO port I bit 2 (FT) with TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7 alternate functions.
157 PI3 bidirectional GPIO port I bit 3 (FT) with TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10 alternate functions.
158 VDD power_in Digital supply pin, 1.7 to 3.6 V.
159 PA14 bidirectional GPIO PA14 (FT), reset function JTCK-SWCLK debug interface.
160 PA15 bidirectional GPIO PA15 (FT), reset function JTDI, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS alternate functions.
161 PC10 bidirectional GPIO port C bit 10 (FT) with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2 alternate functions.
162 PC11 bidirectional GPIO port C bit 11 (FT) with I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4 alternate functions.
163 PC12 bidirectional GPIO port C bit 12 (FT) with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9 alternate functions.
164 PD0 bidirectional GPIO port D bit 0 (FT) with CAN1_RX, FMC_D2 alternate functions.
165 PD1 bidirectional GPIO port D bit 1 (FT) with CAN1_TX, FMC_D3 alternate functions.
166 PD2 bidirectional GPIO port D bit 2 (FT) with TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11 alternate functions.
167 PD3 bidirectional GPIO port D bit 3 (FT) with SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 alternate functions.
168 PD4 bidirectional GPIO port D bit 4 (FT) with USART2_RTS, FMC_NOE alternate functions.
169 PD5 bidirectional GPIO port D bit 5 (FT) with USART2_TX, FMC_NWE alternate functions.
170 VSS power_in Ground supply pin.
171 VDD power_in Digital supply pin, 1.7 to 3.6 V.
172 PD6 bidirectional GPIO port D bit 6 (FT) with SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2 alternate functions.
173 PD7 bidirectional GPIO port D bit 7 (FT) with USART2_CK, FMC_NE1/FMC_NCE2 alternate functions.
174 PJ12 bidirectional GPIO port J bit 12 (FT) with LCD_B0 alternate function.
175 PJ13 bidirectional GPIO port J bit 13 (FT) with LCD_B1 alternate function.
176 PJ14 bidirectional GPIO port J bit 14 (FT) with LCD_B2 alternate function.
177 PJ15 bidirectional GPIO port J bit 15 (FT) with LCD_B3 alternate function.
178 PG9 bidirectional GPIO port G bit 9 (FT) with USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only) alternate functions.
179 PG10 bidirectional GPIO port G bit 10 (FT) with LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2 alternate functions.
180 PG11 bidirectional GPIO port G bit 11 (FT) with ETH_MII_TX_EN/RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3 alternate functions.
181 PG12 bidirectional GPIO port G bit 12 (FT) with SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1 alternate functions.
182 PG13 bidirectional GPIO port G bit 13 (FT) with SPI6_SCK, USART6_CTS, ETH_MII_TXD0/RMII_TXD0, FMC_A24 alternate functions.
183 PG14 bidirectional GPIO port G bit 14 (FT) with SPI6_MOSI, USART6_TX, ETH_MII_TXD1/RMII_TXD1, FMC_A25 alternate functions.
184 VSS power_in Ground supply pin.
185 VDD power_in Digital supply pin, 1.7 to 3.6 V.
186 PK3 bidirectional GPIO port K bit 3 (FT) with LCD_B4 alternate function.
187 PK4 bidirectional GPIO port K bit 4 (FT) with LCD_B5 alternate function.
188 PK5 bidirectional GPIO port K bit 5 (FT) with LCD_B6 alternate function.
189 PK6 bidirectional GPIO port K bit 6 (FT) with LCD_B7 alternate function.
190 PK7 bidirectional GPIO port K bit 7 (FT) with LCD_DE alternate function.
191 PG15 bidirectional GPIO port G bit 15 (FT) with USART6_CTS, FMC_SDNCAS, DCMI_D13 alternate functions.
192 PB3 bidirectional GPIO PB3 (FT), reset function JTDO/TRACESWO, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK alternate functions.
193 PB4 bidirectional GPIO PB4 (FT), reset function NJTRST, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD alternate functions.
194 PB5 bidirectional GPIO port B bit 5 (FT) with TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10 alternate functions.
195 PB6 bidirectional GPIO port B bit 6 (FT) with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5 alternate functions.
196 PB7 bidirectional GPIO port B bit 7 (FT) with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC alternate functions.
197 BOOT0 input Dedicated boot mode selection pin; input up to 9 V, also used as VPP for Flash programming (7 to 9 V).
198 PB8 bidirectional GPIO port B bit 8 (FT) with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6 alternate functions.
199 PB9 bidirectional GPIO port B bit 9 (FT) with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7 alternate functions.
200 PE0 bidirectional GPIO port E bit 0 (FT) with TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2 alternate functions.
201 PE1 bidirectional GPIO port E bit 1 (FT) with UART8_Tx, FMC_NBL1, DCMI_D3 alternate functions.
202 VSS power_in Ground supply pin.
203 PDR_ON input Power-down reset enable: held high enables the internal POR/PDR supervisor; connected to an external supervisor to disable internal reset.
204 VDD power_in Digital supply pin, 1.7 to 3.6 V.
205 PI4 bidirectional GPIO port I bit 4 (FT) with TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4 alternate functions.
206 PI5 bidirectional GPIO port I bit 5 (FT) with TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5 alternate functions.
207 PI6 bidirectional GPIO port I bit 6 (FT) with TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6 alternate functions.
208 PI7 bidirectional GPIO port I bit 7 (FT) with TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7 alternate functions.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-208(28x28)
Category Embedded Processors & Controllers
Pins 208

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
外部主电源电压 (包括 VDDA、VDD 和 VBAT) VDD-VSS -0.3 4 V 91
TTa 引脚上的输入电压 VIN 4 V 91
任何其它引脚上的输入电压 VIN 4 V 91
BOOT0 引脚上的输入电压 VIN 9 V 91
不同 VDD 电源引脚之间的电压变化 /ΔVDDx/ 50 mV 91
流入所有 VDD_x 电源线的总电流 (拉电流) ΣIVDD 270 mA 92
流出所有 VSS_x 接地线的总电流 (灌电流) ΣIVSS -270 mA 92
流入每个 VDD_x 电源线的最大电流 (拉电流) IVDD 100 mA 92
流出每个 VSS_x 接地线的最大电流 (灌电流) IVSS -100 mA 92
任意 I/O 和控制引脚的输出灌电流 IIO 25 mA 92
任意 I/O 和控制引脚的输出拉电流 IIO -25 mA 92
所有 I/O 和控制引脚上的总输出灌电流 ΣIIO 120 mA 92
所有 I/O 和控制引脚上的总输出拉电流 ΣIIO -120 mA 92
FT 引脚上的注入电流 IINJ(PIN) -5 0 mA 92
TTa 引脚上的注入电流 IINJ(PIN) -5 5 mA 92
所有 I/O 和控制引脚上的总注入电流 ΣIINJ(PIN) -25 25 mA 92
储存温度范围 TSTG -65 150 °C 92
最大结温 TJ 125 °C 92
内部 AHB 时钟频率 (电源级别 3, 调压器 ON, 超载 OFF) fHCLK 0 120 MHz VOS=0x01, regulator ON, overdrive OFF 93
内部 AHB 时钟频率 (电源级别 2, 超载 OFF) fHCLK 0 144 MHz VOS=0x10, regulator ON, overdrive OFF 93
内部 AHB 时钟频率 (电源级别 2, 超载 ON) fHCLK 0 168 MHz VOS=0x10, regulator ON, overdrive ON 93
内部 AHB 时钟频率 (电源级别 1, 超载 OFF) fHCLK 0 168 MHz VOS=0x11, regulator ON, overdrive OFF 93
内部 AHB 时钟频率 (电源级别 1, 超载 ON) fHCLK 0 180 MHz VOS=0x11, regulator ON, overdrive ON 93
内部 APB1 时钟频率 (超载 OFF) fPCLK1 0 42 MHz 超载 OFF 93
内部 APB1 时钟频率 (超载 ON) fPCLK1 0 45 MHz 超载 ON 93
内部 APB2 时钟频率 (超载 OFF) fPCLK2 0 84 MHz 超载 OFF 93
内部 APB2 时钟频率 (超载 ON) fPCLK2 0 90 MHz 超载 ON 93
标准工作电压 VDD 1.7 3.6 V 94
模拟工作电压 (ADC 限制在 1.2 Msps) VDDA 1.7 2.4 V 必须与 VDD 等电位 94
模拟工作电压 (ADC 限制在 2.4 Msps) VDDA 2.4 3.6 V 94
备份工作电压 VBAT 1.65 3.6 V 94
调压器 ON 内部 1.2 V 电压 (电源级别 3, 120 MHz) V12 1.08 1.14 1.2 V VOS=0x01, HCLK max 120 MHz 94
调压器 ON 内部 1.2 V 电压 (电源级别 2) V12 1.2 1.26 1.32 V VOS=0x10, HCLK max 144 MHz (overdrive OFF) or 168 MHz (overdrive ON) 94
调压器 ON 内部 1.2 V 电压 (电源级别 1) V12 1.26 1.32 1.4 V VOS=0x11, HCLK max 168 MHz (overdrive OFF) or 180 MHz (overdrive ON) 94
RST 和 FT 引脚上的输入电压 VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
RST 和 FT 引脚上的输入电压 VIN -0.3 5.2 V VDD ≤ 2 V 94
BOOT0 引脚上的输入电压 VIN 0 9 V 94
LQFP208 功率耗散 (as printed) PD 1053 mΩ TA = 85 °C (后缀为 6) 或 TA = 105 °C (后缀为 7) 94
环境温度 (后缀为 6, 最大功率耗散) TA -40 85 °C 94
环境温度 (后缀为 6, 低功率耗散) TA -40 105 °C 低功率耗散 94
结温范围 (后缀为 6) TJ -40 105 °C 后缀为 6 的版本 95
复位和电源控制 POR/PDR 阈值 (下降沿) VPOR/PDR 1.6 1.68 1.76 V 下降沿 97
复位和电源控制 POR/PDR 阈值 (上升沿) VPOR/PDR 1.64 1.72 1.8 V 上升沿 97
1 级欠压门限 (下降沿) VBOR1 2.13 2.19 2.24 V 下降沿 97
1 级欠压门限 (上升沿) VBOR1 2.23 2.29 2.33 V 上升沿 97
可编程电压检测器电平 PLS[2:0]=111 (上升沿) VPVD 3.07 3.14 3.21 V PLS[2:0]=111 上升沿 97
可编程电压检测器电平 PLS[2:0]=111 (下降沿) VPVD 2.95 3.03 3.09 V PLS[2:0]=111 下降沿 97
POR 复位持续时间 TRSTTEMPO 0.5 1.5 3 ms 97
HSI 振荡器精度 (用户通过 RCC_CR 调整) ACCHSI -1 1 % 用户通过 RCC_CR 寄存器调整 120
HSI 振荡器精度 (工厂校准, TA = -40 到 105 °C) ACCHSI -8 4.5 % TA = -40 到 105 ℃ 120
HSI 振荡器精度 (工厂校准, TA = -10 到 85 °C) ACCHSI -4 4 % TA = -10 到 85 ℃ 120
HSI 振荡器精度 (工厂校准, TA = 25 °C) ACCHSI -1 1 % TA = 25 ℃ 120
LSI 振荡器频率 fLSI 17 32 47 kHz 120
HSE 4-26 MHz 振荡器频率 fOSC_IN 4 26 MHz 118
HSE 精度 ACCHSE -500 500 ppm 118
LSE 精度 ACCLSE -500 500 ppm 119
用户外部高速时钟源频率 fHSE_ext 1 50 MHz 116
PLL 输入时钟 fPLL_IN 0.95 1 2.1 MHz 121
PLL 倍频输出时钟 fPLL_OUT 24 180 MHz 121
PLL VCO 输出 fVCO_OUT 192 432 MHz 121
PLL 锁相时间 tLOCK 75 200 µs VCO 频率 = 192 MHz 121
Flash 可擦写次数 NEND 10 千次 TA = -40 到 +85 ℃ (后缀为 6) 128
高电平输出 I/O 输出低电平 (CMOS 端口, IIO=+8 mA) VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
I/O 输出低电平 (TTL 端口, IIO=+8 mA) VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
I/O 输出高电平 (TTL 端口) VOH 2.4 V 134
I/O 输出低电平 (IIO=+20 mA) VOL 1.3 V IIO = +20 mA, 2.7 V ≤ VDD ≤ 3.6 V 134
I/O 输入泄漏电流 Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 131
FT I/O 输入泄漏电流 Ilkg 3 µA VIN = 5 V 131
弱上拉等效电阻 (除 PA10/PB12 外) RPU 30 40 50 kΩ VIN = VSS 131
弱下拉等效电阻 (除 PA10/PB12 外) RPD 30 40 50 kΩ VIN = VDD 131
I/O 引脚电容 CIO 5 pF 131
NRST 弱上拉等效电阻 RPU 30 40 50 kΩ VIN = VSS 136
NRST 输入非滤波脉冲 VNF(NRST) 300 ns VDD > 2.7 V 136
生成的复位脉冲时长 TNRST_OUT 20 µs 内部复位源 136
ADC 电源电压 VDDA 1.7 3.6 V VDDA − VREF+ < 1.2 V 153
ADC 时钟频率 fADC 0.6 15 18 MHz VDDA = 1.7 到 2.4 V 153
ADC 时钟频率 fADC 0.6 30 36 MHz VDDA = 2.4 到 3.6 V 153
总转换时间 (12 位分辨率) tCONV 0.5 16.4 µs fADC = 30 MHz 153
ADC 采样率 (单 ADC, 12 位) fS 2 Msps fADC = 30 MHz, tS = 3 个 ADC 周期 153
ADC VDDA 直流电流消耗 (转换模式) IVDDA 1.6 1.8 mA 转换模式 153
温度传感器线性度 TL -1 1 °C 159
温度传感器启动时间 tSTART 6 10 µs 159
内部参考电压 VREFINT 1.18 1.21 1.24 V -40 °C < TA < +105 °C 159
内部参考电压温度系数 TCoeff 30 50 ppm/°C 159
VBAT 电阻桥 R 50 KΩ 159
VBAT 测量比值 Q 的误差 Er -1 1 % 159
DAC 模拟电源电压 VDDA 1.7 3.6 V 160
DAC 缓冲器开启时的阻性负载 RLOAD 5 kΩ 缓冲器开启 160
DAC 缓冲器关闭时的阻抗输出 RO 15 kΩ 缓冲器关闭 160
DAC 最大容性负载 CLOAD 50 pF DAC_OUT 引脚上, 缓冲器开启 160
DAC 建立时间 tSETTLING 3 6 µs CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ 160
DAC 从关闭状态唤醒的时间 tWAKEUP 6.5 10 µs CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ 160

CAD (KiCad official)

  • Symbol: STM32F429BGT6
  • Footprint: Package_QFP:LQFP-208_28x28mm_P0.5mm
  • 3D model: LQFP-208(28x28) (KiCad packages3D, STEP)
  • 3D model files: stm32f429bgt6-etched.step / stm32f429bgt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f429bgt6.step / stm32f429bgt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF