3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM32F429BGT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-208(28x28)
STM32F429BGT6 from STMicroelectronics, in a LQFP-208(28x28). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | GPIO port E bit 2 (FT, 5 V tolerant) with TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23 alternate functions. |
| 2 | PE3 | bidirectional | GPIO port E bit 3 (FT) with TRACED0, SAI1_SD_B, FMC_A19 alternate functions. |
| 3 | PE4 | bidirectional | GPIO port E bit 4 (FT) with TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0 alternate functions. |
| 4 | PE5 | bidirectional | GPIO port E bit 5 (FT) with TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0 alternate functions. |
| 5 | PE6 | bidirectional | GPIO port E bit 6 (FT) with TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1 alternate functions. |
| 6 | VBAT | power_in | Backup supply (1.65 to 3.6 V) for RTC, 32 kHz oscillator and backup registers/SRAM when VDD is absent. |
| 7 | PI8 | bidirectional | GPIO port I bit 8 (FT) powered via backup switch (max 3 mA, 2 MHz, 30 pF in output mode), TAMP_2 additional function. |
| 8 | PC13 | bidirectional | GPIO port C bit 13 (FT) powered via backup switch (max 3 mA, 2 MHz, 30 pF in output mode), TAMP_1 additional function. |
| 9 | PC14-OSC32_IN | bidirectional | GPIO port C bit 14 (PC14) or 32.768 kHz oscillator input OSC32_IN, powered via backup switch (max 3 mA output). |
| 10 | PC15-OSC32_OUT | bidirectional | GPIO port C bit 15 (PC15) or 32.768 kHz oscillator output OSC32_OUT, powered via backup switch (max 3 mA output). |
| 11 | PI9 | bidirectional | GPIO port I bit 9 (FT) with CAN1_RX, FMC_D30, LCD_VSYNC alternate functions. |
| 12 | PI10 | bidirectional | GPIO port I bit 10 (FT) with ETH_MII_RX_ER, FMC_D31, LCD_HSYNC alternate functions. |
| 13 | PI11 | bidirectional | GPIO port I bit 11 (FT) with OTG_HS_ULPI_DIR alternate function. |
| 14 | VSS | power_in | Ground supply pin. |
| 15 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 16 | PF0 | bidirectional | GPIO port F bit 0 (FT) with I2C2_SDA, FMC_A0 alternate functions. |
| 17 | PF1 | bidirectional | GPIO port F bit 1 (FT) with I2C2_SCL, FMC_A1 alternate functions. |
| 18 | PF2 | bidirectional | GPIO port F bit 2 (FT) with I2C2_SMBA, FMC_A2 alternate functions. |
| 19 | PI12 | bidirectional | GPIO port I bit 12 (FT) with LCD_HSYNC alternate function. |
| 20 | PI13 | bidirectional | GPIO port I bit 13 (FT) with LCD_VSYNC alternate function. |
| 21 | PI14 | bidirectional | GPIO port I bit 14 (FT) with LCD_CLK alternate function. |
| 22 | PF3 | bidirectional | GPIO port F bit 3 (FT) with FMC_A3 alternate function and ADC3_IN9 analog input. |
| 23 | PF4 | bidirectional | GPIO port F bit 4 (FT) with FMC_A4 alternate function and ADC3_IN14 analog input. |
| 24 | PF5 | bidirectional | GPIO port F bit 5 (FT) with FMC_A5 alternate function and ADC3_IN15 analog input. |
| 25 | VSS | power_in | Ground supply pin. |
| 26 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 27 | PF6 | bidirectional | GPIO port F bit 6 (FT) with TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD alternate functions and ADC3_IN4. |
| 28 | PF7 | bidirectional | GPIO port F bit 7 (FT) with TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG alternate functions and ADC3_IN5. |
| 29 | PF8 | bidirectional | GPIO port F bit 8 (FT) with SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR alternate functions and ADC3_IN6. |
| 30 | PF9 | bidirectional | GPIO port F bit 9 (FT) with SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD alternate functions and ADC3_IN7. |
| 31 | PF10 | bidirectional | GPIO port F bit 10 (FT) with FMC_INTR, DCMI_D11, LCD_DE alternate functions and ADC3_IN8. |
| 32 | PH0-OSC_IN | bidirectional | GPIO port H bit 0 (PH0) or main oscillator input OSC_IN (4 to 26 MHz crystal). |
| 33 | PH1-OSC_OUT | bidirectional | GPIO port H bit 1 (PH1) or main oscillator output OSC_OUT. |
| 34 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 35 | PC0 | bidirectional | GPIO port C bit 0 (FT) with OTG_HS_ULPI_STP, FMC_SDNWE alternate functions and ADC123_IN10. |
| 36 | PC1 | bidirectional | GPIO port C bit 1 (FT) with ETH_MDC alternate function and ADC123_IN11. |
| 37 | PC2 | bidirectional | GPIO port C bit 2 (FT) with SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0 alternate functions and ADC123_IN12. |
| 38 | PC3 | bidirectional | GPIO port C bit 3 (FT) with SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0 alternate functions and ADC123_IN13. |
| 39 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 40 | VSSA | power_in | Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS. |
| 41 | VREF+ | power_in | ADC/DAC positive reference voltage, 1.7 to 3.6 V with VREF+ ≤ VDDA. |
| 42 | VDDA | power_in | Analog supply (1.7 to 3.6 V) for ADC, DAC, reset block, RC and PLL; must equal VDD. |
| 43 | PA0-WKUP | bidirectional | GPIO PA0 (FT) with WKUP wake-up, TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS and ADC123_IN0; acts as internal reset when regulator is OFF. |
| 44 | PA1 | bidirectional | GPIO port A bit 1 (FT) with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/RMII_REF_CLK alternate functions and ADC123_IN1. |
| 45 | PA2 | bidirectional | GPIO port A bit 2 (FT) with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO alternate functions and ADC123_IN2. |
| 46 | PH2 | bidirectional | GPIO port H bit 2 (FT) with ETH_MII_CRS, FMC_SDCKE0, LCD_R0 alternate functions. |
| 47 | PH3 | bidirectional | GPIO port H bit 3 (FT) with ETH_MII_COL, FMC_SDNE0, LCD_R1 alternate functions. |
| 48 | PH4 | bidirectional | GPIO port H bit 4 (FT) with I2C2_SCL, OTG_HS_ULPI_NXT alternate functions. |
| 49 | PH5 | bidirectional | GPIO port H bit 5 (FT) with I2C2_SDA, SPI5_NSS, FMC_SDNWE alternate functions. |
| 50 | PA3 | bidirectional | GPIO port A bit 3 (FT) with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5 alternate functions and ADC123_IN3. |
| 51 | VSS | power_in | Ground supply pin. |
| 52 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 53 | PA4 | bidirectional | GPIO port A bit 4 (TTa, 3.3 V tolerant) with SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC alternate functions, ADC12_IN4 and DAC_OUT1. |
| 54 | PA5 | bidirectional | GPIO port A bit 5 (TTa) with TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK alternate functions, ADC12_IN5 and DAC_OUT2. |
| 55 | PA6 | bidirectional | GPIO port A bit 6 (FT) with TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2 alternate functions and ADC12_IN6. |
| 56 | PA7 | bidirectional | GPIO port A bit 7 (FT) with TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/RMII_CRS_DV alternate functions and ADC12_IN7. |
| 57 | PC4 | bidirectional | GPIO port C bit 4 (FT) with ETH_MII_RXD0/ETH_RMII_RXD0 alternate function and ADC12_IN14. |
| 58 | PC5 | bidirectional | GPIO port C bit 5 (FT) with ETH_MII_RXD1/ETH_RMII_RXD1 alternate function and ADC12_IN15. |
| 59 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 60 | VSS | power_in | Ground supply pin. |
| 61 | PB0 | bidirectional | GPIO port B bit 0 (FT) with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2 alternate functions and ADC12_IN8. |
| 62 | PB1 | bidirectional | GPIO port B bit 1 (FT) with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3 alternate functions and ADC12_IN9. |
| 63 | PB2-BOOT1 | bidirectional | GPIO port B bit 2 (FT), also used as BOOT1 boot mode selection pin. |
| 64 | PI15 | bidirectional | GPIO port I bit 15 (FT) with LCD_R0 alternate function. |
| 65 | PJ0 | bidirectional | GPIO port J bit 0 (FT) with LCD_R1 alternate function. |
| 66 | PJ1 | bidirectional | GPIO port J bit 1 (FT) with LCD_R2 alternate function. |
| 67 | PJ2 | bidirectional | GPIO port J bit 2 (FT) with LCD_R3 alternate function. |
| 68 | PJ3 | bidirectional | GPIO port J bit 3 (FT) with LCD_R4 alternate function. |
| 69 | PJ4 | bidirectional | GPIO port J bit 4 (FT) with LCD_R5 alternate function. |
| 70 | PF11 | bidirectional | GPIO port F bit 11 (FT) with SPI5_MOSI, FMC_SDNRAS, DCMI_D12 alternate functions. |
| 71 | PF12 | bidirectional | GPIO port F bit 12 (FT) with FMC_A6 alternate function. |
| 72 | VSS | power_in | Ground supply pin. |
| 73 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 74 | PF13 | bidirectional | GPIO port F bit 13 (FT) with FMC_A7 alternate function. |
| 75 | PF14 | bidirectional | GPIO port F bit 14 (FT) with FMC_A8 alternate function. |
| 76 | PF15 | bidirectional | GPIO port F bit 15 (FT) with FMC_A9 alternate function. |
| 77 | PG0 | bidirectional | GPIO port G bit 0 (FT) with FMC_A10 alternate function. |
| 78 | PG1 | bidirectional | GPIO port G bit 1 (FT) with FMC_A11 alternate function. |
| 79 | PE7 | bidirectional | GPIO port E bit 7 (FT) with TIM1_ETR, UART7_Rx, FMC_D4 alternate functions. |
| 80 | PE8 | bidirectional | GPIO port E bit 8 (FT) with TIM1_CH1N, UART7_Tx, FMC_D5 alternate functions. |
| 81 | PE9 | bidirectional | GPIO port E bit 9 (FT) with TIM1_CH1, FMC_D6 alternate functions. |
| 82 | VSS | power_in | Ground supply pin. |
| 83 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 84 | PE10 | bidirectional | GPIO port E bit 10 (FT) with TIM1_CH2N, FMC_D7 alternate functions. |
| 85 | PE11 | bidirectional | GPIO port E bit 11 (FT) with TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3 alternate functions. |
| 86 | PE12 | bidirectional | GPIO port E bit 12 (FT) with TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4 alternate functions. |
| 87 | PE13 | bidirectional | GPIO port E bit 13 (FT) with TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE alternate functions. |
| 88 | PE14 | bidirectional | GPIO port E bit 14 (FT) with TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK alternate functions. |
| 89 | PE15 | bidirectional | GPIO port E bit 15 (FT) with TIM1_BKIN, FMC_D12, LCD_R7 alternate functions. |
| 90 | PB10 | bidirectional | GPIO port B bit 10 (FT) with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4 alternate functions. |
| 91 | PB11 | bidirectional | GPIO port B bit 11 (FT) with TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/RMII_TX_EN, LCD_G5 alternate functions. |
| 92 | VCAP_1 | passive | Internal regulator output pin requiring an external 2.2 µF ceramic capacitor (ESR < 2 Ω) to ground; external V12 input when regulator is OFF. |
| 93 | VSS | power_in | Ground supply pin. |
| 94 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 95 | PJ5 | bidirectional | GPIO port J bit 5 with LCD_R6 alternate function. |
| 96 | PH6 | bidirectional | GPIO port H bit 6 (FT) with I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8 alternate functions. |
| 97 | PH7 | bidirectional | GPIO port H bit 7 (FT) with I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9 alternate functions. |
| 98 | PH8 | bidirectional | GPIO port H bit 8 (FT) with I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2 alternate functions. |
| 99 | PH9 | bidirectional | GPIO port H bit 9 (FT) with I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3 alternate functions. |
| 100 | PH10 | bidirectional | GPIO port H bit 10 (FT) with TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4 alternate functions. |
| 101 | PH11 | bidirectional | GPIO port H bit 11 (FT) with TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5 alternate functions. |
| 102 | PH12 | bidirectional | GPIO port H bit 12 (FT) with TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6 alternate functions. |
| 103 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 104 | PB12 | bidirectional | GPIO port B bit 12 (FT) with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0, OTG_HS_ID alternate functions. |
| 105 | PB13 | bidirectional | GPIO port B bit 13 (FT) with TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1 alternate functions and OTG_HS_VBUS. |
| 106 | PB14 | bidirectional | GPIO port B bit 14 (FT) with TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM alternate functions. |
| 107 | PB15 | bidirectional | GPIO port B bit 15 (FT) with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP alternate functions. |
| 108 | PD8 | bidirectional | GPIO port D bit 8 (FT) with USART3_TX, FMC_D13 alternate functions. |
| 109 | PD9 | bidirectional | GPIO port D bit 9 (FT) with USART3_RX, FMC_D14 alternate functions. |
| 110 | PD10 | bidirectional | GPIO port D bit 10 (FT) with USART3_CK, FMC_D15, LCD_B3 alternate functions. |
| 111 | PD11 | bidirectional | GPIO port D bit 11 (FT) with USART3_CTS, FMC_A16 alternate functions. |
| 112 | PD12 | bidirectional | GPIO port D bit 12 (FT) with TIM4_CH1, USART3_RTS, FMC_A17 alternate functions. |
| 113 | PD13 | bidirectional | GPIO port D bit 13 (FT) with TIM4_CH2, FMC_A18 alternate functions. |
| 114 | VSS | power_in | Ground supply pin. |
| 115 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 116 | PD14 | bidirectional | GPIO port D bit 14 (FT) with TIM4_CH3, FMC_D0 alternate functions. |
| 117 | PD15 | bidirectional | GPIO port D bit 15 (FT) with TIM4_CH4, FMC_D1 alternate functions. |
| 118 | PJ6 | bidirectional | GPIO port J bit 6 (FT) with LCD_R7 alternate function. |
| 119 | PJ7 | bidirectional | GPIO port J bit 7 (FT) with LCD_G0 alternate function. |
| 120 | PJ8 | bidirectional | GPIO port J bit 8 (FT) with LCD_G1 alternate function. |
| 121 | PJ9 | bidirectional | GPIO port J bit 9 (FT) with LCD_G2 alternate function. |
| 122 | PJ10 | bidirectional | GPIO port J bit 10 (FT) with LCD_G3 alternate function. |
| 123 | PJ11 | bidirectional | GPIO port J bit 11 (FT) with LCD_G4 alternate function. |
| 124 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 125 | VSS | power_in | Ground supply pin. |
| 126 | PK0 | bidirectional | GPIO port K bit 0 (FT) with LCD_G5 alternate function. |
| 127 | PK1 | bidirectional | GPIO port K bit 1 (FT) with LCD_G6 alternate function. |
| 128 | PK2 | bidirectional | GPIO port K bit 2 (FT) with LCD_G7 alternate function. |
| 129 | PG2 | bidirectional | GPIO port G bit 2 (FT) with FMC_A12 alternate function. |
| 130 | PG3 | bidirectional | GPIO port G bit 3 (FT) with FMC_A13 alternate function. |
| 131 | PG4 | bidirectional | GPIO port G bit 4 (FT) with FMC_A14/FMC_BA0 alternate function. |
| 132 | PG5 | bidirectional | GPIO port G bit 5 (FT) with FMC_A15/FMC_BA1 alternate function. |
| 133 | PG6 | bidirectional | GPIO port G bit 6 (FT) with FMC_INT2, DCMI_D12, LCD_R7 alternate functions. |
| 134 | PG7 | bidirectional | GPIO port G bit 7 (FT) with USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK alternate functions. |
| 135 | PG8 | bidirectional | GPIO port G bit 8 (FT) with SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK alternate functions. |
| 136 | VSS | power_in | Ground supply pin. |
| 137 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 138 | PC6 | bidirectional | GPIO port C bit 6 (FT) with TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC alternate functions. |
| 139 | PC7 | bidirectional | GPIO port C bit 7 (FT) with TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6 alternate functions. |
| 140 | PC8 | bidirectional | GPIO port C bit 8 (FT) with TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2 alternate functions. |
| 141 | PC9 | bidirectional | GPIO port C bit 9 (FT) with MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3 alternate functions. |
| 142 | PA8 | bidirectional | GPIO port A bit 8 (FT) with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6 alternate functions. |
| 143 | PA9 | bidirectional | GPIO port A bit 9 (FT) with TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0 alternate functions and OTG_FS_VBUS. |
| 144 | PA10 | bidirectional | GPIO port A bit 10 (FT) with TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1 alternate functions. |
| 145 | PA11 | bidirectional | GPIO port A bit 11 (FT) with TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM alternate functions. |
| 146 | PA12 | bidirectional | GPIO port A bit 12 (FT) with TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP alternate functions. |
| 147 | PA13 | bidirectional | GPIO PA13 (FT), reset function JTMS-SWDIO debug interface. |
| 148 | VCAP_2 | passive | Internal regulator output pin requiring an external 2.2 µF ceramic capacitor (ESR < 2 Ω) to ground; external V12 input when regulator is OFF. |
| 149 | VSS | power_in | Ground supply pin. |
| 150 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 151 | PH13 | bidirectional | GPIO port H bit 13 (FT) with TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2 alternate functions. |
| 152 | PH14 | bidirectional | GPIO port H bit 14 (FT) with TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3 alternate functions. |
| 153 | PH15 | bidirectional | GPIO port H bit 15 (FT) with TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4 alternate functions. |
| 154 | PI0 | bidirectional | GPIO port I bit 0 (FT) with TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5 alternate functions. |
| 155 | PI1 | bidirectional | GPIO port I bit 1 (FT) with SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6 alternate functions. |
| 156 | PI2 | bidirectional | GPIO port I bit 2 (FT) with TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7 alternate functions. |
| 157 | PI3 | bidirectional | GPIO port I bit 3 (FT) with TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10 alternate functions. |
| 158 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 159 | PA14 | bidirectional | GPIO PA14 (FT), reset function JTCK-SWCLK debug interface. |
| 160 | PA15 | bidirectional | GPIO PA15 (FT), reset function JTDI, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS alternate functions. |
| 161 | PC10 | bidirectional | GPIO port C bit 10 (FT) with SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2 alternate functions. |
| 162 | PC11 | bidirectional | GPIO port C bit 11 (FT) with I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4 alternate functions. |
| 163 | PC12 | bidirectional | GPIO port C bit 12 (FT) with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9 alternate functions. |
| 164 | PD0 | bidirectional | GPIO port D bit 0 (FT) with CAN1_RX, FMC_D2 alternate functions. |
| 165 | PD1 | bidirectional | GPIO port D bit 1 (FT) with CAN1_TX, FMC_D3 alternate functions. |
| 166 | PD2 | bidirectional | GPIO port D bit 2 (FT) with TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11 alternate functions. |
| 167 | PD3 | bidirectional | GPIO port D bit 3 (FT) with SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7 alternate functions. |
| 168 | PD4 | bidirectional | GPIO port D bit 4 (FT) with USART2_RTS, FMC_NOE alternate functions. |
| 169 | PD5 | bidirectional | GPIO port D bit 5 (FT) with USART2_TX, FMC_NWE alternate functions. |
| 170 | VSS | power_in | Ground supply pin. |
| 171 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 172 | PD6 | bidirectional | GPIO port D bit 6 (FT) with SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2 alternate functions. |
| 173 | PD7 | bidirectional | GPIO port D bit 7 (FT) with USART2_CK, FMC_NE1/FMC_NCE2 alternate functions. |
| 174 | PJ12 | bidirectional | GPIO port J bit 12 (FT) with LCD_B0 alternate function. |
| 175 | PJ13 | bidirectional | GPIO port J bit 13 (FT) with LCD_B1 alternate function. |
| 176 | PJ14 | bidirectional | GPIO port J bit 14 (FT) with LCD_B2 alternate function. |
| 177 | PJ15 | bidirectional | GPIO port J bit 15 (FT) with LCD_B3 alternate function. |
| 178 | PG9 | bidirectional | GPIO port G bit 9 (FT) with USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only) alternate functions. |
| 179 | PG10 | bidirectional | GPIO port G bit 10 (FT) with LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2 alternate functions. |
| 180 | PG11 | bidirectional | GPIO port G bit 11 (FT) with ETH_MII_TX_EN/RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3 alternate functions. |
| 181 | PG12 | bidirectional | GPIO port G bit 12 (FT) with SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1 alternate functions. |
| 182 | PG13 | bidirectional | GPIO port G bit 13 (FT) with SPI6_SCK, USART6_CTS, ETH_MII_TXD0/RMII_TXD0, FMC_A24 alternate functions. |
| 183 | PG14 | bidirectional | GPIO port G bit 14 (FT) with SPI6_MOSI, USART6_TX, ETH_MII_TXD1/RMII_TXD1, FMC_A25 alternate functions. |
| 184 | VSS | power_in | Ground supply pin. |
| 185 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 186 | PK3 | bidirectional | GPIO port K bit 3 (FT) with LCD_B4 alternate function. |
| 187 | PK4 | bidirectional | GPIO port K bit 4 (FT) with LCD_B5 alternate function. |
| 188 | PK5 | bidirectional | GPIO port K bit 5 (FT) with LCD_B6 alternate function. |
| 189 | PK6 | bidirectional | GPIO port K bit 6 (FT) with LCD_B7 alternate function. |
| 190 | PK7 | bidirectional | GPIO port K bit 7 (FT) with LCD_DE alternate function. |
| 191 | PG15 | bidirectional | GPIO port G bit 15 (FT) with USART6_CTS, FMC_SDNCAS, DCMI_D13 alternate functions. |
| 192 | PB3 | bidirectional | GPIO PB3 (FT), reset function JTDO/TRACESWO, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK alternate functions. |
| 193 | PB4 | bidirectional | GPIO PB4 (FT), reset function NJTRST, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD alternate functions. |
| 194 | PB5 | bidirectional | GPIO port B bit 5 (FT) with TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10 alternate functions. |
| 195 | PB6 | bidirectional | GPIO port B bit 6 (FT) with TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5 alternate functions. |
| 196 | PB7 | bidirectional | GPIO port B bit 7 (FT) with TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC alternate functions. |
| 197 | BOOT0 | input | Dedicated boot mode selection pin; input up to 9 V, also used as VPP for Flash programming (7 to 9 V). |
| 198 | PB8 | bidirectional | GPIO port B bit 8 (FT) with TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6 alternate functions. |
| 199 | PB9 | bidirectional | GPIO port B bit 9 (FT) with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7 alternate functions. |
| 200 | PE0 | bidirectional | GPIO port E bit 0 (FT) with TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2 alternate functions. |
| 201 | PE1 | bidirectional | GPIO port E bit 1 (FT) with UART8_Tx, FMC_NBL1, DCMI_D3 alternate functions. |
| 202 | VSS | power_in | Ground supply pin. |
| 203 | PDR_ON | input | Power-down reset enable: held high enables the internal POR/PDR supervisor; connected to an external supervisor to disable internal reset. |
| 204 | VDD | power_in | Digital supply pin, 1.7 to 3.6 V. |
| 205 | PI4 | bidirectional | GPIO port I bit 4 (FT) with TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4 alternate functions. |
| 206 | PI5 | bidirectional | GPIO port I bit 5 (FT) with TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5 alternate functions. |
| 207 | PI6 | bidirectional | GPIO port I bit 6 (FT) with TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6 alternate functions. |
| 208 | PI7 | bidirectional | GPIO port I bit 7 (FT) with TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7 alternate functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-208(28x28) |
| Category | Embedded Processors & Controllers |
| Pins | 208 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 外部主电源电压 (包括 VDDA、VDD 和 VBAT) | VDD-VSS | -0.3 | 4 | V | 91 | ||
| TTa 引脚上的输入电压 | VIN | 4 | V | 91 | |||
| 任何其它引脚上的输入电压 | VIN | 4 | V | 91 | |||
| BOOT0 引脚上的输入电压 | VIN | 9 | V | 91 | |||
| 不同 VDD 电源引脚之间的电压变化 | /ΔVDDx/ | 50 | mV | 91 | |||
| 流入所有 VDD_x 电源线的总电流 (拉电流) | ΣIVDD | 270 | mA | 92 | |||
| 流出所有 VSS_x 接地线的总电流 (灌电流) | ΣIVSS | -270 | mA | 92 | |||
| 流入每个 VDD_x 电源线的最大电流 (拉电流) | IVDD | 100 | mA | 92 | |||
| 流出每个 VSS_x 接地线的最大电流 (灌电流) | IVSS | -100 | mA | 92 | |||
| 任意 I/O 和控制引脚的输出灌电流 | IIO | 25 | mA | 92 | |||
| 任意 I/O 和控制引脚的输出拉电流 | IIO | -25 | mA | 92 | |||
| 所有 I/O 和控制引脚上的总输出灌电流 | ΣIIO | 120 | mA | 92 | |||
| 所有 I/O 和控制引脚上的总输出拉电流 | ΣIIO | -120 | mA | 92 | |||
| FT 引脚上的注入电流 | IINJ(PIN) | -5 | 0 | mA | 92 | ||
| TTa 引脚上的注入电流 | IINJ(PIN) | -5 | 5 | mA | 92 | ||
| 所有 I/O 和控制引脚上的总注入电流 | ΣIINJ(PIN) | -25 | 25 | mA | 92 | ||
| 储存温度范围 | TSTG | -65 | 150 | °C | 92 | ||
| 最大结温 | TJ | 125 | °C | 92 | |||
| 内部 AHB 时钟频率 (电源级别 3, 调压器 ON, 超载 OFF) | fHCLK | 0 | 120 | MHz | VOS=0x01, regulator ON, overdrive OFF | 93 | |
| 内部 AHB 时钟频率 (电源级别 2, 超载 OFF) | fHCLK | 0 | 144 | MHz | VOS=0x10, regulator ON, overdrive OFF | 93 | |
| 内部 AHB 时钟频率 (电源级别 2, 超载 ON) | fHCLK | 0 | 168 | MHz | VOS=0x10, regulator ON, overdrive ON | 93 | |
| 内部 AHB 时钟频率 (电源级别 1, 超载 OFF) | fHCLK | 0 | 168 | MHz | VOS=0x11, regulator ON, overdrive OFF | 93 | |
| 内部 AHB 时钟频率 (电源级别 1, 超载 ON) | fHCLK | 0 | 180 | MHz | VOS=0x11, regulator ON, overdrive ON | 93 | |
| 内部 APB1 时钟频率 (超载 OFF) | fPCLK1 | 0 | 42 | MHz | 超载 OFF | 93 | |
| 内部 APB1 时钟频率 (超载 ON) | fPCLK1 | 0 | 45 | MHz | 超载 ON | 93 | |
| 内部 APB2 时钟频率 (超载 OFF) | fPCLK2 | 0 | 84 | MHz | 超载 OFF | 93 | |
| 内部 APB2 时钟频率 (超载 ON) | fPCLK2 | 0 | 90 | MHz | 超载 ON | 93 | |
| 标准工作电压 | VDD | 1.7 | 3.6 | V | 94 | ||
| 模拟工作电压 (ADC 限制在 1.2 Msps) | VDDA | 1.7 | 2.4 | V | 必须与 VDD 等电位 | 94 | |
| 模拟工作电压 (ADC 限制在 2.4 Msps) | VDDA | 2.4 | 3.6 | V | 94 | ||
| 备份工作电压 | VBAT | 1.65 | 3.6 | V | 94 | ||
| 调压器 ON 内部 1.2 V 电压 (电源级别 3, 120 MHz) | V12 | 1.08 | 1.14 | 1.2 | V | VOS=0x01, HCLK max 120 MHz | 94 |
| 调压器 ON 内部 1.2 V 电压 (电源级别 2) | V12 | 1.2 | 1.26 | 1.32 | V | VOS=0x10, HCLK max 144 MHz (overdrive OFF) or 168 MHz (overdrive ON) | 94 |
| 调压器 ON 内部 1.2 V 电压 (电源级别 1) | V12 | 1.26 | 1.32 | 1.4 | V | VOS=0x11, HCLK max 168 MHz (overdrive OFF) or 180 MHz (overdrive ON) | 94 |
| RST 和 FT 引脚上的输入电压 | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 94 | |
| RST 和 FT 引脚上的输入电压 | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 94 | |
| BOOT0 引脚上的输入电压 | VIN | 0 | 9 | V | 94 | ||
| LQFP208 功率耗散 (as printed) | PD | 1053 | mΩ | TA = 85 °C (后缀为 6) 或 TA = 105 °C (后缀为 7) | 94 | ||
| 环境温度 (后缀为 6, 最大功率耗散) | TA | -40 | 85 | °C | 94 | ||
| 环境温度 (后缀为 6, 低功率耗散) | TA | -40 | 105 | °C | 低功率耗散 | 94 | |
| 结温范围 (后缀为 6) | TJ | -40 | 105 | °C | 后缀为 6 的版本 | 95 | |
| 复位和电源控制 POR/PDR 阈值 (下降沿) | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | 下降沿 | 97 |
| 复位和电源控制 POR/PDR 阈值 (上升沿) | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | 上升沿 | 97 |
| 1 级欠压门限 (下降沿) | VBOR1 | 2.13 | 2.19 | 2.24 | V | 下降沿 | 97 |
| 1 级欠压门限 (上升沿) | VBOR1 | 2.23 | 2.29 | 2.33 | V | 上升沿 | 97 |
| 可编程电压检测器电平 PLS[2:0]=111 (上升沿) | VPVD | 3.07 | 3.14 | 3.21 | V | PLS[2:0]=111 上升沿 | 97 |
| 可编程电压检测器电平 PLS[2:0]=111 (下降沿) | VPVD | 2.95 | 3.03 | 3.09 | V | PLS[2:0]=111 下降沿 | 97 |
| POR 复位持续时间 | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 97 | |
| HSI 振荡器精度 (用户通过 RCC_CR 调整) | ACCHSI | -1 | 1 | % | 用户通过 RCC_CR 寄存器调整 | 120 | |
| HSI 振荡器精度 (工厂校准, TA = -40 到 105 °C) | ACCHSI | -8 | 4.5 | % | TA = -40 到 105 ℃ | 120 | |
| HSI 振荡器精度 (工厂校准, TA = -10 到 85 °C) | ACCHSI | -4 | 4 | % | TA = -10 到 85 ℃ | 120 | |
| HSI 振荡器精度 (工厂校准, TA = 25 °C) | ACCHSI | -1 | 1 | % | TA = 25 ℃ | 120 | |
| LSI 振荡器频率 | fLSI | 17 | 32 | 47 | kHz | 120 | |
| HSE 4-26 MHz 振荡器频率 | fOSC_IN | 4 | 26 | MHz | 118 | ||
| HSE 精度 | ACCHSE | -500 | 500 | ppm | 118 | ||
| LSE 精度 | ACCLSE | -500 | 500 | ppm | 119 | ||
| 用户外部高速时钟源频率 | fHSE_ext | 1 | 50 | MHz | 116 | ||
| PLL 输入时钟 | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 121 | |
| PLL 倍频输出时钟 | fPLL_OUT | 24 | 180 | MHz | 121 | ||
| PLL VCO 输出 | fVCO_OUT | 192 | 432 | MHz | 121 | ||
| PLL 锁相时间 | tLOCK | 75 | 200 | µs | VCO 频率 = 192 MHz | 121 | |
| Flash 可擦写次数 | NEND | 10 | 千次 | TA = -40 到 +85 ℃ (后缀为 6) | 128 | ||
| 高电平输出 I/O 输出低电平 (CMOS 端口, IIO=+8 mA) | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 134 | ||
| I/O 输出低电平 (TTL 端口, IIO=+8 mA) | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 134 | ||
| I/O 输出高电平 (TTL 端口) | VOH | 2.4 | V | 134 | |||
| I/O 输出低电平 (IIO=+20 mA) | VOL | 1.3 | V | IIO = +20 mA, 2.7 V ≤ VDD ≤ 3.6 V | 134 | ||
| I/O 输入泄漏电流 | Ilkg | -1 | 1 | µA | VSS ≤ VIN ≤ VDD | 131 | |
| FT I/O 输入泄漏电流 | Ilkg | 3 | µA | VIN = 5 V | 131 | ||
| 弱上拉等效电阻 (除 PA10/PB12 外) | RPU | 30 | 40 | 50 | kΩ | VIN = VSS | 131 |
| 弱下拉等效电阻 (除 PA10/PB12 外) | RPD | 30 | 40 | 50 | kΩ | VIN = VDD | 131 |
| I/O 引脚电容 | CIO | 5 | pF | 131 | |||
| NRST 弱上拉等效电阻 | RPU | 30 | 40 | 50 | kΩ | VIN = VSS | 136 |
| NRST 输入非滤波脉冲 | VNF(NRST) | 300 | ns | VDD > 2.7 V | 136 | ||
| 生成的复位脉冲时长 | TNRST_OUT | 20 | µs | 内部复位源 | 136 | ||
| ADC 电源电压 | VDDA | 1.7 | 3.6 | V | VDDA − VREF+ < 1.2 V | 153 | |
| ADC 时钟频率 | fADC | 0.6 | 15 | 18 | MHz | VDDA = 1.7 到 2.4 V | 153 |
| ADC 时钟频率 | fADC | 0.6 | 30 | 36 | MHz | VDDA = 2.4 到 3.6 V | 153 |
| 总转换时间 (12 位分辨率) | tCONV | 0.5 | 16.4 | µs | fADC = 30 MHz | 153 | |
| ADC 采样率 (单 ADC, 12 位) | fS | 2 | Msps | fADC = 30 MHz, tS = 3 个 ADC 周期 | 153 | ||
| ADC VDDA 直流电流消耗 (转换模式) | IVDDA | 1.6 | 1.8 | mA | 转换模式 | 153 | |
| 温度传感器线性度 | TL | -1 | 1 | °C | 159 | ||
| 温度传感器启动时间 | tSTART | 6 | 10 | µs | 159 | ||
| 内部参考电压 | VREFINT | 1.18 | 1.21 | 1.24 | V | -40 °C < TA < +105 °C | 159 |
| 内部参考电压温度系数 | TCoeff | 30 | 50 | ppm/°C | 159 | ||
| VBAT 电阻桥 | R | 50 | KΩ | 159 | |||
| VBAT 测量比值 Q 的误差 | Er | -1 | 1 | % | 159 | ||
| DAC 模拟电源电压 | VDDA | 1.7 | 3.6 | V | 160 | ||
| DAC 缓冲器开启时的阻性负载 | RLOAD | 5 | kΩ | 缓冲器开启 | 160 | ||
| DAC 缓冲器关闭时的阻抗输出 | RO | 15 | kΩ | 缓冲器关闭 | 160 | ||
| DAC 最大容性负载 | CLOAD | 50 | pF | DAC_OUT 引脚上, 缓冲器开启 | 160 | ||
| DAC 建立时间 | tSETTLING | 3 | 6 | µs | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 160 | |
| DAC 从关闭状态唤醒的时间 | tWAKEUP | 6.5 | 10 | µs | CLOAD ≤ 50 pF, RLOAD ≥ 5 kΩ | 160 |
CAD (KiCad official)
- Symbol:
STM32F429BGT6 - Footprint:
Package_QFP:LQFP-208_28x28mm_P0.5mm - 3D model: LQFP-208(28x28) (KiCad packages3D, STEP)
- 3D model files:
stm32f429bgt6-etched.step/stm32f429bgt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f429bgt6.step/stm32f429bgt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (226 pp, sha256
9eccb942b0df757c, retrieved 2026-11-06, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).