3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16C621A-04I/P
Microchip Tech · Pre-ordered MCUs · PDIP-18
PIC16C621A-04I from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/VREF | bidirectional | Analog comparator input or VREF output, with Schmitt Trigger input buffer. |
| 2 | RA3/AN3 | bidirectional | Analog comparator input/output, with Schmitt Trigger input buffer. |
| 3 | RA4/T0CKI | bidirectional | Can be selected as the clock input to the Timer0 timer/counter or a comparator output, and the output is open drain type. |
| 4 | MCLR/VPP | input | Master Clear (Reset) input and programming voltage input, acting as an Active Low Reset to the device. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT | bidirectional | Can also be selected as an external interrupt pin, and is a Schmitt Trigger input when configured as the external interrupt. |
| 7 | RB1 | bidirectional | PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up. |
| 8 | RB2 | bidirectional | PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up. |
| 9 | RB3 | bidirectional | PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up. |
| 10 | RB4 | bidirectional | Interrupt-on-change pin, with TTL input and software programmable internal weak pull-up. |
| 11 | RB5 | bidirectional | Interrupt-on-change pin, with TTL input and software programmable internal weak pull-up. |
| 12 | RB6 | bidirectional | Interrupt-on-change pin and serial programming clock, with TTL input and Schmitt Trigger input when used in Serial Programming mode. |
| 13 | RB7 | bidirectional | Interrupt-on-change pin and serial programming data, with TTL input and Schmitt Trigger input when used in Serial Programming mode. |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | OSC2/CLKOUT | output | Oscillator crystal output; in RC mode it outputs CLKOUT, which has 1/4 the frequency of OSC1 and denotes the instruction cycle rate. |
| 16 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input, with ST/CMOS input buffer. |
| 17 | RA0/AN0 | bidirectional | Analog comparator input, with Schmitt Trigger input buffer. |
| 18 | RA1/AN1 | bidirectional | Analog comparator input, with Schmitt Trigger input buffer. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | PDIP-18 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | See Figures 12-1, 12-2, 12-3, 12-4, and 12-5 | 92 | |
| Brown-out Detect Voltage | VBOR | 3.7 | 4 | 4.35 | V | BOREN configuration bit is cleared | 92 |
| VDD rise rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 92 | ||
| Supply Current | IDD | 1.2 | 2 | mA | FOSC = 4 MHz, VDD = 5.5V, WDT disabled, XT mode, (Note 4) | 93 | |
| Supply Current | IDD | 0.4 | 1.2 | mA | FOSC = 4 MHz, VDD = 3.0V, WDT disabled, XT mode, (Note 4) | 93 | |
| Supply Current | IDD | 1 | 2 | mA | FOSC = 10 MHz, VDD = 3.0V, WDT disabled, HS mode, (Note 6) | 93 | |
| Supply Current | IDD | 4 | 6 | mA | FOSC = 20 MHz, VDD = 4.5V, WDT disabled, HS mode | 93 | |
| Supply Current | IDD | 4 | 7 | mA | FOSC = 20 MHz, VDD = 5.5V, WDT disabled*, HS mode | 93 | |
| Supply Current | IDD | 35 | 70 | µA | FOSC = 32 kHz, VDD = 3.0V, WDT disabled, LP mode | 93 | |
| Power-down Current | IPD | 2.2 | µA | VDD = 3.0V | 93 | ||
| Power-down Current | IPD | 5 | µA | VDD = 4.5V* | 93 | ||
| Power-down Current | IPD | 9 | µA | VDD = 5.5V | 93 | ||
| Power-down Current | IPD | 15 | µA | VDD = 5.5V Extended Temp. | 93 | ||
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | I/O ports with TTL buffer, VDD = 4.5V to 5.5V | 98 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | I/O ports with TTL buffer, VDD = 4.5V to 5.5V | 98 | ||
| Input Leakage Current, I/O ports (except PORTA) | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at hi-impedance | 99 | |
| Input Leakage Current, PORTA | IIL | -0.5 | 0.5 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 99 | |
| Input Leakage Current, RA4/T0CKI | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD | 99 | |
| Input Leakage Current, OSC1, MCLR | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 99 | |
| PORTB weak pull-up current | IPURB | 50 | 200 | 400 | µA | VDD = 5.0V, VPIN = VSS | 99 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C | 99 | ||
| Output Low Voltage, OSC2/CLKOUT (RC only) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40° to +85°C | 99 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 8.5 | V | RA4 pin PIC16C62XA, PIC16LC62XA, PIC16CR62XA, PIC16LCR62XA | 100 | ||
| Capacitive Loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock used to drive OSC1 | 100 | ||
| Capacitive Loading, All I/O pins/OSC2 (in RC mode) | CIO | 50 | pF | All I/O pins/OSC2 (in RC mode) | 100 | ||
| LP Oscillator Operating Frequency | FOSC | 0 | 200 | kHz | All temperatures | 94 | |
| RC Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 94 | |
| XT Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 94 | |
| HS Oscillator Operating Frequency | FOSC | 0 | 20 | MHz | All temperatures | 94 | |
| Ambient Temperature under bias | -40 | 125 | °C | 83 | |||
| Storage Temperature | -65 | 150 | °C | 83 | |||
| Voltage on VDD with respect to VSS | VDD | 0 | 7.5 | V | 83 | ||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | Note 2 | 83 | ||
| Voltage on any pin with respect to VSS (except VDD and MCLR), lower limit | -0.6 | V | Except VDD and MCLR; upper limit VDD +0.6V | 83 | |||
| Total power Dissipation | 1 | W | Note 1 | 83 | |||
| Input Clamp Current | IIK | -20 | 20 | mA | VI <0 or VI> VDD | 83 | |
| Output Clamp Current | IOK | -20 | 20 | mA | VO <0 or VO>VDD | 83 | |
| Maximum Output Current sunk by any I/O pin | 25 | mA | 83 | ||||
| Maximum Output Current sourced by any I/O pin | 25 | mA | 83 |
CAD (KiCad official)
- Symbol:
PIC16C621A-04I - Footprint:
Package_DIP:DIP-18_W7.62mm - 3D model: PDIP-18 (KiCad packages3D, STEP)
- 3D model files:
pic16c621a-04i-etched.step/pic16c621a-04i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c621a-04i.step/pic16c621a-04i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (128 pp, sha256
c793591b01696c5d, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16C621A-04I/P. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C621A-04I/SO