main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic16c621a-04i: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic16c621a-04i-etched.glb Publish 0.1.0 · Ray
pic16c621a-04i-etched.step pic16c621a-04i: factory component page (tier=mfr) · Ray
pic16c621a-04i-hero.glb pic16c621a-04i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic16c621a-04i-hero.overlay.json Publish 0.1.0 · Ray
pic16c621a-04i-p-hero.glb Publish 0.1.1 · Ray
pic16c621a-04i-p-hero.overlay.json Publish 0.1.1 · Ray
pic16c621a-04i.glb Publish 0.1.0 · Ray
pic16c621a-04i.kicad_mod Publish 0.1.0 · Ray
pic16c621a-04i.kicad_sym Publish 0.1.0 · Ray
pic16c621a-04i.lbr pic16c621a-04i-p: renamed from pic16c621a-04i, the part it was built from (PIC16C621A-04I/P); family listed · Ray
pic16c621a-04i.step Publish 0.1.0 · Ray
README.md pic16c621a-04i-p: renamed from pic16c621a-04i, the part it was built from (PIC16C621A-04I/P); family listed · Ray
verification.json Verified: Published by the parts factory: tier mfr, 18 pins · Ray

PIC16C621A-04I/P

Microchip Tech · Pre-ordered MCUs · PDIP-18

PIC16C621A-04I from Microchip Tech, in a PDIP-18. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2/VREF bidirectional Analog comparator input or VREF output, with Schmitt Trigger input buffer.
2 RA3/AN3 bidirectional Analog comparator input/output, with Schmitt Trigger input buffer.
3 RA4/T0CKI bidirectional Can be selected as the clock input to the Timer0 timer/counter or a comparator output, and the output is open drain type.
4 MCLR/VPP input Master Clear (Reset) input and programming voltage input, acting as an Active Low Reset to the device.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT bidirectional Can also be selected as an external interrupt pin, and is a Schmitt Trigger input when configured as the external interrupt.
7 RB1 bidirectional PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up.
8 RB2 bidirectional PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up.
9 RB3 bidirectional PORTB bi-directional I/O pin with TTL input, which can be software programmed for internal weak pull-up.
10 RB4 bidirectional Interrupt-on-change pin, with TTL input and software programmable internal weak pull-up.
11 RB5 bidirectional Interrupt-on-change pin, with TTL input and software programmable internal weak pull-up.
12 RB6 bidirectional Interrupt-on-change pin and serial programming clock, with TTL input and Schmitt Trigger input when used in Serial Programming mode.
13 RB7 bidirectional Interrupt-on-change pin and serial programming data, with TTL input and Schmitt Trigger input when used in Serial Programming mode.
14 VDD power_in Positive supply for logic and I/O pins.
15 OSC2/CLKOUT output Oscillator crystal output; in RC mode it outputs CLKOUT, which has 1/4 the frequency of OSC1 and denotes the instruction cycle rate.
16 OSC1/CLKIN input Oscillator crystal input or external clock source input, with ST/CMOS input buffer.
17 RA0/AN0 bidirectional Analog comparator input, with Schmitt Trigger input buffer.
18 RA1/AN1 bidirectional Analog comparator input, with Schmitt Trigger input buffer.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package PDIP-18
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 5.5 V See Figures 12-1, 12-2, 12-3, 12-4, and 12-5 92
Brown-out Detect Voltage VBOR 3.7 4 4.35 V BOREN configuration bit is cleared 92
VDD rise rate to ensure Power-on Reset SVDD 0.05 V/ms See section on Power-on Reset for details 92
Supply Current IDD 1.2 2 mA FOSC = 4 MHz, VDD = 5.5V, WDT disabled, XT mode, (Note 4) 93
Supply Current IDD 0.4 1.2 mA FOSC = 4 MHz, VDD = 3.0V, WDT disabled, XT mode, (Note 4) 93
Supply Current IDD 1 2 mA FOSC = 10 MHz, VDD = 3.0V, WDT disabled, HS mode, (Note 6) 93
Supply Current IDD 4 6 mA FOSC = 20 MHz, VDD = 4.5V, WDT disabled, HS mode 93
Supply Current IDD 4 7 mA FOSC = 20 MHz, VDD = 5.5V, WDT disabled*, HS mode 93
Supply Current IDD 35 70 µA FOSC = 32 kHz, VDD = 3.0V, WDT disabled, LP mode 93
Power-down Current IPD 2.2 µA VDD = 3.0V 93
Power-down Current IPD 5 µA VDD = 4.5V* 93
Power-down Current IPD 9 µA VDD = 5.5V 93
Power-down Current IPD 15 µA VDD = 5.5V Extended Temp. 93
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V I/O ports with TTL buffer, VDD = 4.5V to 5.5V 98
Input High Voltage, I/O ports with TTL buffer VIH 2 V I/O ports with TTL buffer, VDD = 4.5V to 5.5V 98
Input Leakage Current, I/O ports (except PORTA) IIL -1 1 µA VSS ≤ VPIN ≤ VDD, pin at hi-impedance 99
Input Leakage Current, PORTA IIL -0.5 0.5 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 99
Input Leakage Current, RA4/T0CKI IIL -1 1 µA Vss ≤ VPIN ≤ VDD 99
Input Leakage Current, OSC1, MCLR IIL -5 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 99
PORTB weak pull-up current IPURB 50 200 400 µA VDD = 5.0V, VPIN = VSS 99
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40° to +85°C 99
Output Low Voltage, OSC2/CLKOUT (RC only) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40° to +85°C 99
Open-Drain High Voltage, RA4 pin VOD 8.5 V RA4 pin PIC16C62XA, PIC16LC62XA, PIC16CR62XA, PIC16LCR62XA 100
Capacitive Loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock used to drive OSC1 100
Capacitive Loading, All I/O pins/OSC2 (in RC mode) CIO 50 pF All I/O pins/OSC2 (in RC mode) 100
LP Oscillator Operating Frequency FOSC 0 200 kHz All temperatures 94
RC Oscillator Operating Frequency FOSC 0 4 MHz All temperatures 94
XT Oscillator Operating Frequency FOSC 0 4 MHz All temperatures 94
HS Oscillator Operating Frequency FOSC 0 20 MHz All temperatures 94
Ambient Temperature under bias -40 125 °C 83
Storage Temperature -65 150 °C 83
Voltage on VDD with respect to VSS VDD 0 7.5 V 83
Voltage on MCLR with respect to VSS 0 14 V Note 2 83
Voltage on any pin with respect to VSS (except VDD and MCLR), lower limit -0.6 V Except VDD and MCLR; upper limit VDD +0.6V 83
Total power Dissipation 1 W Note 1 83
Input Clamp Current IIK -20 20 mA VI <0 or VI> VDD 83
Output Clamp Current IOK -20 20 mA VO <0 or VO>VDD 83
Maximum Output Current sunk by any I/O pin 25 mA 83
Maximum Output Current sourced by any I/O pin 25 mA 83

CAD (KiCad official)

  • Symbol: PIC16C621A-04I
  • Footprint: Package_DIP:DIP-18_W7.62mm
  • 3D model: PDIP-18 (KiCad packages3D, STEP)
  • 3D model files: pic16c621a-04i-etched.step / pic16c621a-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c621a-04i.step / pic16c621a-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (128 pp, sha256 c793591b01696c5d, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16C621A-04I/P. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16C621A-04I/SO