Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCV7547MWTXG

onsemi · Gate Drive ICs · QFN-48-EP(7x7)

NCV7547MWTXG from onsemi, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GL1 output Low-side pre-driver output for half-bridge 1 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
2 GH1 output High-side pre-driver output for half-bridge 1 with pull-down resistor to HB1, driving the gate of an external logic-level N-MOS FET.
3 HB1 input Half-bridge 1 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
4 GL2 output Low-side pre-driver output for half-bridge 2 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
5 GH2 output High-side pre-driver output for half-bridge 2 with pull-down resistor to HB2, driving the gate of an external logic-level N-MOS FET.
6 HB2 input Half-bridge 2 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
7 GL3 output Low-side pre-driver output for half-bridge 3 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
8 GH3 output High-side pre-driver output for half-bridge 3 with pull-down resistor to HB3, driving the gate of an external logic-level N-MOS FET.
9 HB3 input Half-bridge 3 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
10 GL4 output Low-side pre-driver output for half-bridge 4 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
11 GH4 output High-side pre-driver output for half-bridge 4 with pull-down resistor to HB4, driving the gate of an external logic-level N-MOS FET.
12 HB4 input Half-bridge 4 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
13 PGND power_in Power ground: high-power return path, reference for the half-bridge drivers and VDS sense reference node for the low-side drivers.
14 GL5 output Low-side pre-driver output for half-bridge 5 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
15 GH5 output High-side pre-driver output for half-bridge 5 with pull-down resistor to HB5, driving the gate of an external logic-level N-MOS FET.
16 HB5 input Half-bridge 5 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
17 GL6 output Low-side pre-driver output for half-bridge 6 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
18 GH6 output High-side pre-driver output for half-bridge 6 with pull-down resistor to HB6, driving the gate of an external logic-level N-MOS FET.
19 HB6 input Half-bridge 6 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain.
20 GL7 output Low-side pre-driver output for channel 7 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET.
21 DL7 input Low-side drain node monitoring input for external low-side switch 7 with pull-down resistor to AGND.
22 GH7 output High-side pre-driver output for channel 7 with pull-down resistor to SH7, driving the gate of an external logic-level N-MOS FET.
23 SH7 input High-side source node monitoring input for external high-side switch 7 with pull-down resistor to AGND.
24 AGND power_in Signal ground: low-power return path and reference for the analog circuitry.
25 DGND power_in Digital ground: low-power return path and reference for the digital circuitry.
26 CSB input SPI active-low chip select digital input with pull-up resistor.
27 SCLK input SPI clock digital input with pull-down resistor.
28 SI input SPI serial data digital input with pull-down resistor.
29 RSTB input Active-low master reset/wake digital input with falling-edge de-glitch and pull-down resistor; the device is in wake state when the pin is high.
30 PWM4 input PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers.
31 PWM3 input PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers.
32 PWM2 input PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers.
33 PWM1 input PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers.
34 FSM input Active-high fail-safe mode digital input with symmetrical de-glitch and pull-down resistor, settable from an external watchdog circuit.
35 SO tri_state SPI serial output, digital tri-state with high-side path protection against VCC back-bias on external regulator failure or short to VS.
36 VCC power_in Logic supply input for the SPI block, internal logic and low-power analog (4.5 V to 5.5 V recommended), with a ceramic bypass capacitor to GND close to the pin.
37 N/C unconnected No internal connection.
38 N/C unconnected No internal connection.
39 N/C unconnected No internal connection.
40 N/C unconnected No internal connection.
41 N/C unconnected No internal connection.
42 VS power_in Main high-power battery supply input (7 V to 18 V recommended) and VDS sense reference for the high-side drivers, with a ceramic bypass capacitor to GND close to the pin.
43 CP power_out Charge pump output, with an external ceramic buffer capacitor connected between CP and VS.
44 CPSW power_out Switched charge pump output that activates the external reverse battery and security power MOSFET switches via SPI.
45 C1A passive Charge pump switching node for external ceramic charge pump capacitor 1.
46 C1B passive Charge pump switching node for external ceramic charge pump capacitor 1.
47 C2A passive Charge pump switching node for external ceramic charge pump capacitor 2.
48 C2B passive Charge pump switching node for external ceramic charge pump capacitor 2.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package QFN-48-EP(7x7)
Category Power Supply Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VS Supply voltage (DC) VSMAX -0.3 28 V DC: 2 min @ 25°C 6
VS Supply voltage (AC) VSMAX 40 V ISO7637 Pulse 5b, 400 ms @ 25°C 6
VCC Supply voltage VCCMAX -0.3 7 V 6
Output voltage CP, CPSW V_OUTMAX -0.3 40 V 6
Output voltage SO V_SOMAX -0.3 20 V 6
Input voltage FSM, C1A, C1B, C2A, C2B V_INMAX1 -0.3 40 V 6
Input voltage (clamped) HBx, SH7, DL7 V_INMAX2 -1 40 V 6
Input voltage CSB, SCLK, SI, RSTB, PWMx V_INMAX3 -0.3 20 V 6
Input current (clamped) I_INMAX -5 5 mA CSB, SCLK, SI, RSTB, FSM, PWMx, GHx, GLx 6
Junction temperature TJ -40 150 °C 6
Storage temperature TSTG -55 150 °C 6
Peak reflow soldering temperature TPK 260 °C Lead-free 60 to 150 seconds at 217°C 6
Junction-to-ambient thermal resistance (2S0P) RθJA 61.7 °C/W Still-air, PIN = 1 W, JESD51-3, 2S0P PCB (Note 2) 6
Junction-to-ambient thermal resistance (1S2P) RθJA 37.5 °C/W Still-air, PIN = 1 W, JESD51-7, 1S2P PCB (Note 3) 6
Junction-to-exposed-pad thermal resistance RθJPAD 10.8 °C/W Still-air, PIN = 1 W 6
Main power supply voltage VSOP 7 18 V 6
Logic power supply voltage VCCOP 4.5 5.5 V 6
Logic high input voltage VIN_HIGH 3.5 V Max is VCCOP 6
Logic low input voltage VIN_LOW 0 1.5 V 6
Half-bridge output PWM rate fPWM 25 kHz 6
Charge pump capacitors (C1, C2, CCP) 220 4700 nF 6
SPI clock frequency fSCLK 0.1 2.5 MHz 6
Ambient still-air operating temperature TA -40 125 °C 6
VS standby current IVS_SBY 5 µA VS = 12.0V, 0 ≤ VCC ≤ 5.5 V, RSTB = 0, TA = 25°C 7
VS operating current IVS_OP0 1.6 5 mA VCC = 5.0 V, RSTB = 1, TA = 25°C, CR1.D[10]=0 7
VS operating current IVS_OP1 20.3 25 mA CR1.D[10]=1 7
VS under-voltage lockout VSUVLO 4.5 5 5.5 V VS decreasing 7
VS over-voltage shutdown rising VSOVSDR 19 20 21 V VS increasing 7
VS over-voltage shutdown falling VSOVSDF 18 19 20 V VS decreasing 7
VS PWM threshold VSPWM 8.9 9.45 10 V VS decreasing 7
VCC standby current IVCC_SBY 5 µA VS = 12.0V, VCC = 5.5 V, RSTB = 0, TA = 25°C 7
VCC operating current IVCC_OP 8 12 mA VS = 12.0V, RSTB = 1, TA = 25°C 7
VCC POR threshold rising VCCPORR 3.71 4.1 4.49 V VCC increasing 7
VCC POR threshold falling VCCPORF 3.5 3.85 4.2 V VCC decreasing 7
Charge pump switching frequency fCP 0.75 1.1 1.45 MHz Single-stage, complementary-phase topology 7
Charge pump regulation voltage CPREG 8.3 8.9 9.5 V V(CP, VS), VS > VSPWM, 0 ≤ I(CP) ≤ 15 mA 7
Charge pump low detection CPLOW0 7.3 8 8.8 V V(CP, VS) decreasing, VS > VSPWM 7
Charge pump fail detection CPFAIL 4.925 5.375 5.75 V V(CP, VS) decreasing 8
Charge pump over-voltage detection CPOV 28 30.25 32.5 V VS increasing 8
VIN high VINHX 3.5 V CSB, SCLK, SI, RSTB, FSM, PWMx 8
VIN low VINLX 1.5 V CSB, SCLK, SI, RSTB, FSM, PWMx 8
SO low voltage VSOL 0.4 V ISINK = 1.0 mA 8
SCLK clock period tSCLK 400 ns 8
High-side on-state drive voltage VPDHX 8.3 9.5 V High-side, No External Load, VS > VSPWM 9
Low-side on-state drive voltage VPDLX 8.1 9.8 V Low-side, No External Load, VS > VSPWM 9
Gate-source pull-down resistor RGSX 70 130 kΩ R(GHx, HBx), R(GHx, SH7), R(GLx, PGND) 9
VDS monitor threshold VDSx=0x00 VDSTHRX 263 300 337 mV VDSx[2:0] = 0x00 11
VDS monitor threshold VDSx=0x07 VDSTHRX 890 1000 1110 mV VDSx[2:0] = 0x07 11
HBx monitor threshold VHBTHR 45 50 55 % VS 12
Watchdog timeout tWD 20 25 30 ms CR1.D[8] = 0 12
Thermal shutdown threshold TOTS 150 170 190 °C TJ increasing, all outputs OFF (Note 6) 12
ESD HBM all pins VESD_HBM 2 kV Human Body Model, AEC-Q100-002 6

CAD (KiCad official)

  • Symbol: NCV7547MWTXG
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: ncv7547mwtxg-etched.step / ncv7547mwtxg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncv7547mwtxg.step / ncv7547mwtxg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (42 pp, sha256 f6c1de1ed04a18a6, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF