Generated by kicad-footprint-generator · KiCad file format 20260206
NCV7547MWTXG
onsemi · Gate Drive ICs · QFN-48-EP(7x7)
NCV7547MWTXG from onsemi, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GL1 | output | Low-side pre-driver output for half-bridge 1 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 2 | GH1 | output | High-side pre-driver output for half-bridge 1 with pull-down resistor to HB1, driving the gate of an external logic-level N-MOS FET. |
| 3 | HB1 | input | Half-bridge 1 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 4 | GL2 | output | Low-side pre-driver output for half-bridge 2 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 5 | GH2 | output | High-side pre-driver output for half-bridge 2 with pull-down resistor to HB2, driving the gate of an external logic-level N-MOS FET. |
| 6 | HB2 | input | Half-bridge 2 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 7 | GL3 | output | Low-side pre-driver output for half-bridge 3 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 8 | GH3 | output | High-side pre-driver output for half-bridge 3 with pull-down resistor to HB3, driving the gate of an external logic-level N-MOS FET. |
| 9 | HB3 | input | Half-bridge 3 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 10 | GL4 | output | Low-side pre-driver output for half-bridge 4 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 11 | GH4 | output | High-side pre-driver output for half-bridge 4 with pull-down resistor to HB4, driving the gate of an external logic-level N-MOS FET. |
| 12 | HB4 | input | Half-bridge 4 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 13 | PGND | power_in | Power ground: high-power return path, reference for the half-bridge drivers and VDS sense reference node for the low-side drivers. |
| 14 | GL5 | output | Low-side pre-driver output for half-bridge 5 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 15 | GH5 | output | High-side pre-driver output for half-bridge 5 with pull-down resistor to HB5, driving the gate of an external logic-level N-MOS FET. |
| 16 | HB5 | input | Half-bridge 5 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 17 | GL6 | output | Low-side pre-driver output for half-bridge 6 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 18 | GH6 | output | High-side pre-driver output for half-bridge 6 with pull-down resistor to HB6, driving the gate of an external logic-level N-MOS FET. |
| 19 | HB6 | input | Half-bridge 6 switch node monitoring input with pull-down resistor to AGND, connected to high-side MOSFET source and low-side MOSFET drain. |
| 20 | GL7 | output | Low-side pre-driver output for channel 7 with pull-down resistor to PGND, driving the gate of an external logic-level N-MOS FET. |
| 21 | DL7 | input | Low-side drain node monitoring input for external low-side switch 7 with pull-down resistor to AGND. |
| 22 | GH7 | output | High-side pre-driver output for channel 7 with pull-down resistor to SH7, driving the gate of an external logic-level N-MOS FET. |
| 23 | SH7 | input | High-side source node monitoring input for external high-side switch 7 with pull-down resistor to AGND. |
| 24 | AGND | power_in | Signal ground: low-power return path and reference for the analog circuitry. |
| 25 | DGND | power_in | Digital ground: low-power return path and reference for the digital circuitry. |
| 26 | CSB | input | SPI active-low chip select digital input with pull-up resistor. |
| 27 | SCLK | input | SPI clock digital input with pull-down resistor. |
| 28 | SI | input | SPI serial data digital input with pull-down resistor. |
| 29 | RSTB | input | Active-low master reset/wake digital input with falling-edge de-glitch and pull-down resistor; the device is in wake state when the pin is high. |
| 30 | PWM4 | input | PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers. |
| 31 | PWM3 | input | PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers. |
| 32 | PWM2 | input | PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers. |
| 33 | PWM1 | input | PWM digital input with symmetrical adaptive de-glitch and pull-down resistor providing PWM signals to the half-bridge pre-drivers. |
| 34 | FSM | input | Active-high fail-safe mode digital input with symmetrical de-glitch and pull-down resistor, settable from an external watchdog circuit. |
| 35 | SO | tri_state | SPI serial output, digital tri-state with high-side path protection against VCC back-bias on external regulator failure or short to VS. |
| 36 | VCC | power_in | Logic supply input for the SPI block, internal logic and low-power analog (4.5 V to 5.5 V recommended), with a ceramic bypass capacitor to GND close to the pin. |
| 37 | N/C | unconnected | No internal connection. |
| 38 | N/C | unconnected | No internal connection. |
| 39 | N/C | unconnected | No internal connection. |
| 40 | N/C | unconnected | No internal connection. |
| 41 | N/C | unconnected | No internal connection. |
| 42 | VS | power_in | Main high-power battery supply input (7 V to 18 V recommended) and VDS sense reference for the high-side drivers, with a ceramic bypass capacitor to GND close to the pin. |
| 43 | CP | power_out | Charge pump output, with an external ceramic buffer capacitor connected between CP and VS. |
| 44 | CPSW | power_out | Switched charge pump output that activates the external reverse battery and security power MOSFET switches via SPI. |
| 45 | C1A | passive | Charge pump switching node for external ceramic charge pump capacitor 1. |
| 46 | C1B | passive | Charge pump switching node for external ceramic charge pump capacitor 1. |
| 47 | C2A | passive | Charge pump switching node for external ceramic charge pump capacitor 2. |
| 48 | C2B | passive | Charge pump switching node for external ceramic charge pump capacitor 2. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-48-EP(7x7) |
| Category | Power Supply Chip |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VS Supply voltage (DC) | VSMAX | -0.3 | 28 | V | DC: 2 min @ 25°C | 6 | |
| VS Supply voltage (AC) | VSMAX | 40 | V | ISO7637 Pulse 5b, 400 ms @ 25°C | 6 | ||
| VCC Supply voltage | VCCMAX | -0.3 | 7 | V | 6 | ||
| Output voltage CP, CPSW | V_OUTMAX | -0.3 | 40 | V | 6 | ||
| Output voltage SO | V_SOMAX | -0.3 | 20 | V | 6 | ||
| Input voltage FSM, C1A, C1B, C2A, C2B | V_INMAX1 | -0.3 | 40 | V | 6 | ||
| Input voltage (clamped) HBx, SH7, DL7 | V_INMAX2 | -1 | 40 | V | 6 | ||
| Input voltage CSB, SCLK, SI, RSTB, PWMx | V_INMAX3 | -0.3 | 20 | V | 6 | ||
| Input current (clamped) | I_INMAX | -5 | 5 | mA | CSB, SCLK, SI, RSTB, FSM, PWMx, GHx, GLx | 6 | |
| Junction temperature | TJ | -40 | 150 | °C | 6 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 6 | ||
| Peak reflow soldering temperature | TPK | 260 | °C | Lead-free 60 to 150 seconds at 217°C | 6 | ||
| Junction-to-ambient thermal resistance (2S0P) | RθJA | 61.7 | °C/W | Still-air, PIN = 1 W, JESD51-3, 2S0P PCB (Note 2) | 6 | ||
| Junction-to-ambient thermal resistance (1S2P) | RθJA | 37.5 | °C/W | Still-air, PIN = 1 W, JESD51-7, 1S2P PCB (Note 3) | 6 | ||
| Junction-to-exposed-pad thermal resistance | RθJPAD | 10.8 | °C/W | Still-air, PIN = 1 W | 6 | ||
| Main power supply voltage | VSOP | 7 | 18 | V | 6 | ||
| Logic power supply voltage | VCCOP | 4.5 | 5.5 | V | 6 | ||
| Logic high input voltage | VIN_HIGH | 3.5 | V | Max is VCCOP | 6 | ||
| Logic low input voltage | VIN_LOW | 0 | 1.5 | V | 6 | ||
| Half-bridge output PWM rate | fPWM | 25 | kHz | 6 | |||
| Charge pump capacitors (C1, C2, CCP) | 220 | 4700 | nF | 6 | |||
| SPI clock frequency | fSCLK | 0.1 | 2.5 | MHz | 6 | ||
| Ambient still-air operating temperature | TA | -40 | 125 | °C | 6 | ||
| VS standby current | IVS_SBY | 5 | µA | VS = 12.0V, 0 ≤ VCC ≤ 5.5 V, RSTB = 0, TA = 25°C | 7 | ||
| VS operating current | IVS_OP0 | 1.6 | 5 | mA | VCC = 5.0 V, RSTB = 1, TA = 25°C, CR1.D[10]=0 | 7 | |
| VS operating current | IVS_OP1 | 20.3 | 25 | mA | CR1.D[10]=1 | 7 | |
| VS under-voltage lockout | VSUVLO | 4.5 | 5 | 5.5 | V | VS decreasing | 7 |
| VS over-voltage shutdown rising | VSOVSDR | 19 | 20 | 21 | V | VS increasing | 7 |
| VS over-voltage shutdown falling | VSOVSDF | 18 | 19 | 20 | V | VS decreasing | 7 |
| VS PWM threshold | VSPWM | 8.9 | 9.45 | 10 | V | VS decreasing | 7 |
| VCC standby current | IVCC_SBY | 5 | µA | VS = 12.0V, VCC = 5.5 V, RSTB = 0, TA = 25°C | 7 | ||
| VCC operating current | IVCC_OP | 8 | 12 | mA | VS = 12.0V, RSTB = 1, TA = 25°C | 7 | |
| VCC POR threshold rising | VCCPORR | 3.71 | 4.1 | 4.49 | V | VCC increasing | 7 |
| VCC POR threshold falling | VCCPORF | 3.5 | 3.85 | 4.2 | V | VCC decreasing | 7 |
| Charge pump switching frequency | fCP | 0.75 | 1.1 | 1.45 | MHz | Single-stage, complementary-phase topology | 7 |
| Charge pump regulation voltage | CPREG | 8.3 | 8.9 | 9.5 | V | V(CP, VS), VS > VSPWM, 0 ≤ I(CP) ≤ 15 mA | 7 |
| Charge pump low detection | CPLOW0 | 7.3 | 8 | 8.8 | V | V(CP, VS) decreasing, VS > VSPWM | 7 |
| Charge pump fail detection | CPFAIL | 4.925 | 5.375 | 5.75 | V | V(CP, VS) decreasing | 8 |
| Charge pump over-voltage detection | CPOV | 28 | 30.25 | 32.5 | V | VS increasing | 8 |
| VIN high | VINHX | 3.5 | V | CSB, SCLK, SI, RSTB, FSM, PWMx | 8 | ||
| VIN low | VINLX | 1.5 | V | CSB, SCLK, SI, RSTB, FSM, PWMx | 8 | ||
| SO low voltage | VSOL | 0.4 | V | ISINK = 1.0 mA | 8 | ||
| SCLK clock period | tSCLK | 400 | ns | 8 | |||
| High-side on-state drive voltage | VPDHX | 8.3 | 9.5 | V | High-side, No External Load, VS > VSPWM | 9 | |
| Low-side on-state drive voltage | VPDLX | 8.1 | 9.8 | V | Low-side, No External Load, VS > VSPWM | 9 | |
| Gate-source pull-down resistor | RGSX | 70 | 130 | kΩ | R(GHx, HBx), R(GHx, SH7), R(GLx, PGND) | 9 | |
| VDS monitor threshold VDSx=0x00 | VDSTHRX | 263 | 300 | 337 | mV | VDSx[2:0] = 0x00 | 11 |
| VDS monitor threshold VDSx=0x07 | VDSTHRX | 890 | 1000 | 1110 | mV | VDSx[2:0] = 0x07 | 11 |
| HBx monitor threshold | VHBTHR | 45 | 50 | 55 | % VS | 12 | |
| Watchdog timeout | tWD | 20 | 25 | 30 | ms | CR1.D[8] = 0 | 12 |
| Thermal shutdown threshold | TOTS | 150 | 170 | 190 | °C | TJ increasing, all outputs OFF (Note 6) | 12 |
| ESD HBM all pins | VESD_HBM | 2 | kV | Human Body Model, AEC-Q100-002 | 6 |
CAD (KiCad official)
- Symbol:
NCV7547MWTXG - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
ncv7547mwtxg-etched.step/ncv7547mwtxg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncv7547mwtxg.step/ncv7547mwtxg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (42 pp, sha256
f6c1de1ed04a18a6, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).