3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownGM14001ARHZ-R7
GONGMOSEMI · Linear Voltage Regulators (LDO) · MSOP-8
GM14001ARHZ-R7 from GONGMOSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Regulated output voltage; bypass VOUT to GND with a 2.2 µF or larger capacitor. |
| 2 | SENSE | input | Sense input connected to the load; an external resistor divider can set the output above the fixed voltage. |
| 3 | NC | unconnected | Not connected. |
| 4 | GND | power_in | Ground. |
| 5 | EN | input | Enable pin: high starts the regulator, low shuts it down; connect to VIN for automatic start-up. |
| 6 | SS | passive | Soft-start pin; an external capacitor sets the soft-start time, and it must be left open for 500 µs typical start-up and never grounded. |
| 7 | NC | unconnected | Not connected. |
| 8 | VIN | power_in | Regulator input supply; bypass VIN to GND with a 2.2 µF or larger capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | GONGMOSEMI |
| Package | MSOP-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压范围 (VIN input voltage range) | VIN | 1.9 | 40 | V | 6 | ||
| 输出电压精度 (output voltage accuracy), TJ = -40°C to +125°C | VOUT | -1.2 | 1.2 | % | 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V, TJ = -40°C to +125°C | 6 | |
| 输出电压精度 (output voltage accuracy), TJ = -40°C to +150°C | VOUT | -1.6 | 1.6 | % | 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V | 6 | |
| 电压调整率 (line regulation) | ΔVOUT/ΔVIN | -0.015 | 0.015 | %V | VIN = (VOUT + 1 V) to 40 V | 6 | |
| 负载调整率 (load regulation) | ΔVOUT/ΔIOUT | 0.002 | 0.004 | %/mA | IOUT = 1 mA to 150 mA | 6 | |
| 工作电源电流 (operating supply current) | IGND | 7.5 | 130 | µA | IOUT = 0 µA | 6 | |
| 工作电源电流 (operating supply current) | IGND | 62 | 190 | µA | IOUT = 10 mA | 6 | |
| 工作电源电流 (operating supply current) | IGND | 320 | 840 | µA | IOUT = 150 mA | 6 | |
| 关断电流 (shutdown current) | IGND-SD | 1.1 | 15 | µA | EN = GND, VIN = 40 V | 6 | |
| SENSE 输入偏置电流 (SENSE input bias current) | SENSEI-BIAS | 10 | 300 | nA | 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V | 6 | |
| 压差 (dropout voltage) | VDROPOUT | 30 | 60 | mV | IOUT = 10 mA, TJ = -55°C to +125°C | 6 | |
| 压差 (dropout voltage) | VDROPOUT | 105 | mV | IOUT = 10 mA | 6 | ||
| 压差 (dropout voltage) | VDROPOUT | 127 | 350 | mV | IOUT = 150 mA, TJ = -55°C to +125°C | 6 | |
| 压差 (dropout voltage) | VDROPOUT | 400 | mV | IOUT = 150 mA | 6 | ||
| 启动时间 (start-up time) | tSTART-UP | 500 | µs | VOUT = 5 V | 6 | ||
| 软启动源电流 (soft-start source current) | SSI-SOURCE | 1.2 | µA | SS = GND | 6 | ||
| 限流阈值 (current limit threshold) | ILIMIT | 200 | 250 | 320 | mA | Defined at output 90% of nominal (footnote 4) | 6 |
| 热关断阈值 (thermal shutdown threshold) | TSSD | 165 | °C | TJ rising | 6 | ||
| 热关断迟滞 (thermal shutdown hysteresis) | TSSD-HYS | 15 | °C | 6 | |||
| UVLO 上升阈值 (UVLO rising threshold) | UVLORISE | 1.74 | 1.89 | V | Input voltage rising | 6 | |
| UVLO 下降阈值 (UVLO falling threshold) | UVLOFALL | 1.4 | 1.64 | V | Input voltage falling | 6 | |
| EN 逻辑高电平 (EN logic high) | ENHIGH | 0.85 | V | 1.9 V ≤ VIN ≤ 40 V | 6 | ||
| EN 逻辑低电平 (EN logic low) | ENLOW | 0.39 | V | 1.9 V ≤ VIN ≤ 40 V | 6 | ||
| EN 漏电流 (EN leakage current) | IEN-LKG | 0.04 | 1 | µA | EN = VIN or GND | 6 | |
| 使能延迟时间 (enable delay time) | tEN-DLY | 440 | µs | EN rising from 0 V to VIN, to 0.1 × VOUT | 6 | ||
| 输出噪声 (output noise) | OUTNOISE | 15 | µVRMS | 10 Hz to 100 kHz, all output voltage options | 6 | ||
| 电源抑制比 (PSRR) | PSRR | 43 | dB | 1 MHz, VIN = 7 V, VOUT = 5 V | 6 | ||
| 电源抑制比 (PSRR) | PSRR | 60 | dB | 100 kHz, VIN = 7 V, VOUT = 5 V | 6 | ||
| 电源抑制比 (PSRR) | PSRR | 75 | dB | 10 kHz, VIN = 7 V, VOUT = 5 V | 6 | ||
| VIN 至 GND (VIN to GND) | -0.3 | 50 | V | 5 | |||
| VOUT 至 GND (VOUT to GND) | -0.3 | V | Maximum printed as VIN | 5 | |||
| EN 至 GND (EN to GND) | -0.3 | 50 | V | 5 | |||
| SENSE 至 GND (SENSE to GND) | -0.3 | 6 | V | 5 | |||
| SS 至 GND (SS to GND) | -0.3 | V | Maximum printed as VIN or +6 V | 5 | |||
| 存储温度范围 (storage temperature) | -65 | 150 | °C | 5 | |||
| 工作环境温度范围 (operating ambient temperature TA) | TA | -40 | 125 | °C | 5 | ||
| 工作结温范围 (operating junction temperature TJ) | TJ | -40 | 150 | °C | 5 | ||
| 结到环境热阻 8 引脚 MSOP (junction-to-ambient thermal resistance θJA) | θJA | 64 | °C/W | 8-pin MSOP, worst case, surface-mount board | 5 |
CAD (KiCad official)
- Symbol:
GM14001ARHZ-R7 - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
gm14001arhz-r7-etched.step/gm14001arhz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);gm14001arhz-r7.step/gm14001arhz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: GONGMOSEMI datasheet (17 pp, sha256
884ffec0d5edbf46, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).