main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers gm14001arhz-r7: viewers · Ray
gm14001arhz-r7-etched.glb Publish 0.1.0 · Ray
gm14001arhz-r7-etched.step gm14001arhz-r7: factory component page (tier=lcsc) · Ray
gm14001arhz-r7-hero.glb gm14001arhz-r7: hero GLB from the etched model (keeps the MPN mark) · Ray
gm14001arhz-r7-hero.overlay.json Publish 0.1.0 · Ray
gm14001arhz-r7.glb Publish 0.1.0 · Ray
gm14001arhz-r7.kicad_mod Publish 0.1.0 · Ray
gm14001arhz-r7.kicad_sym Publish 0.1.0 · Ray
gm14001arhz-r7.lbr Publish 0.1.0 · Ray
gm14001arhz-r7.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

GM14001ARHZ-R7

GONGMOSEMI · Linear Voltage Regulators (LDO) · MSOP-8

GM14001ARHZ-R7 from GONGMOSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Regulated output voltage; bypass VOUT to GND with a 2.2 µF or larger capacitor.
2 SENSE input Sense input connected to the load; an external resistor divider can set the output above the fixed voltage.
3 NC unconnected Not connected.
4 GND power_in Ground.
5 EN input Enable pin: high starts the regulator, low shuts it down; connect to VIN for automatic start-up.
6 SS passive Soft-start pin; an external capacitor sets the soft-start time, and it must be left open for 500 µs typical start-up and never grounded.
7 NC unconnected Not connected.
8 VIN power_in Regulator input supply; bypass VIN to GND with a 2.2 µF or larger capacitor.

Key specifications

Parameter Value
Manufacturer GONGMOSEMI
Package MSOP-8
Category Power Management
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入电压范围 (VIN input voltage range) VIN 1.9 40 V 6
输出电压精度 (output voltage accuracy), TJ = -40°C to +125°C VOUT -1.2 1.2 % 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V, TJ = -40°C to +125°C 6
输出电压精度 (output voltage accuracy), TJ = -40°C to +150°C VOUT -1.6 1.6 % 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V 6
电压调整率 (line regulation) ΔVOUT/ΔVIN -0.015 0.015 %V VIN = (VOUT + 1 V) to 40 V 6
负载调整率 (load regulation) ΔVOUT/ΔIOUT 0.002 0.004 %/mA IOUT = 1 mA to 150 mA 6
工作电源电流 (operating supply current) IGND 7.5 130 µA IOUT = 0 µA 6
工作电源电流 (operating supply current) IGND 62 190 µA IOUT = 10 mA 6
工作电源电流 (operating supply current) IGND 320 840 µA IOUT = 150 mA 6
关断电流 (shutdown current) IGND-SD 1.1 15 µA EN = GND, VIN = 40 V 6
SENSE 输入偏置电流 (SENSE input bias current) SENSEI-BIAS 10 300 nA 100 µA < IOUT < 150 mA, VIN = (VOUT + 1 V) to 40 V 6
压差 (dropout voltage) VDROPOUT 30 60 mV IOUT = 10 mA, TJ = -55°C to +125°C 6
压差 (dropout voltage) VDROPOUT 105 mV IOUT = 10 mA 6
压差 (dropout voltage) VDROPOUT 127 350 mV IOUT = 150 mA, TJ = -55°C to +125°C 6
压差 (dropout voltage) VDROPOUT 400 mV IOUT = 150 mA 6
启动时间 (start-up time) tSTART-UP 500 µs VOUT = 5 V 6
软启动源电流 (soft-start source current) SSI-SOURCE 1.2 µA SS = GND 6
限流阈值 (current limit threshold) ILIMIT 200 250 320 mA Defined at output 90% of nominal (footnote 4) 6
热关断阈值 (thermal shutdown threshold) TSSD 165 °C TJ rising 6
热关断迟滞 (thermal shutdown hysteresis) TSSD-HYS 15 °C 6
UVLO 上升阈值 (UVLO rising threshold) UVLORISE 1.74 1.89 V Input voltage rising 6
UVLO 下降阈值 (UVLO falling threshold) UVLOFALL 1.4 1.64 V Input voltage falling 6
EN 逻辑高电平 (EN logic high) ENHIGH 0.85 V 1.9 V ≤ VIN ≤ 40 V 6
EN 逻辑低电平 (EN logic low) ENLOW 0.39 V 1.9 V ≤ VIN ≤ 40 V 6
EN 漏电流 (EN leakage current) IEN-LKG 0.04 1 µA EN = VIN or GND 6
使能延迟时间 (enable delay time) tEN-DLY 440 µs EN rising from 0 V to VIN, to 0.1 × VOUT 6
输出噪声 (output noise) OUTNOISE 15 µVRMS 10 Hz to 100 kHz, all output voltage options 6
电源抑制比 (PSRR) PSRR 43 dB 1 MHz, VIN = 7 V, VOUT = 5 V 6
电源抑制比 (PSRR) PSRR 60 dB 100 kHz, VIN = 7 V, VOUT = 5 V 6
电源抑制比 (PSRR) PSRR 75 dB 10 kHz, VIN = 7 V, VOUT = 5 V 6
VIN 至 GND (VIN to GND) -0.3 50 V 5
VOUT 至 GND (VOUT to GND) -0.3 V Maximum printed as VIN 5
EN 至 GND (EN to GND) -0.3 50 V 5
SENSE 至 GND (SENSE to GND) -0.3 6 V 5
SS 至 GND (SS to GND) -0.3 V Maximum printed as VIN or +6 V 5
存储温度范围 (storage temperature) -65 150 °C 5
工作环境温度范围 (operating ambient temperature TA) TA -40 125 °C 5
工作结温范围 (operating junction temperature TJ) TJ -40 150 °C 5
结到环境热阻 8 引脚 MSOP (junction-to-ambient thermal resistance θJA) θJA 64 °C/W 8-pin MSOP, worst case, surface-mount board 5

CAD (KiCad official)

  • Symbol: GM14001ARHZ-R7
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: gm14001arhz-r7-etched.step / gm14001arhz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); gm14001arhz-r7.step / gm14001arhz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GONGMOSEMI datasheet (17 pp, sha256 884ffec0d5edbf46, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF