Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISC012N04LM6ATMA1

Infineon Technologies · MOSFETs · PG-TDSON-8 FL

ISC012N04LM6ATMA1 from Infineon Technologies, in a PG-TDSON-8 FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 Source passive Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land)
2 Source passive Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land)
3 Source passive Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land)
4 Gate input Gate (Gate Pin 4)
5 Drain passive Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5)
6 Drain passive Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5)
7 Drain passive Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5)
8 Drain passive Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5)

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package PG-TDSON-8 FL
Category Transistors/Thyristors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Continuous drain current ID 238 A VGS=10V,TC=25°C 3
Continuous drain current ID 168 A VGS=10V,TC=100°C 3
Continuous drain current ID 141 A VGS=4.5V,TC=100°C 3
Continuous drain current ID 37 A VGS=10V,TA=25°C,RthJA=50°C/W 3
Pulsed drain current ID,pulse 952 A TA=25°C 3
Avalanche energy, single pulse EAS 219 mJ ID=50A,RGS=25Ω 3
Gate source voltage VGS -20 20 V 3
Power dissipation Ptot 125 W TC=25°C 3
Power dissipation Ptot 3 W TA=25°C,RthJA=50°C/W 3
Operating and storage temperature Tj,Tstg -55 175 °C IEC climatic category; DIN IEC 68-1: 55/175/56 3
Thermal resistance, junction - case, bottom RthJC 1.2 °C/W 3
Thermal resistance, junction - case, top RthJC 20 °C/W 3
Thermal resistance, junction - ambient, 6 cm² cooling area RthJA 50 °C/W 3
Drain-source breakdown voltage V(BR)DSS 40 V VGS=0V,ID=1mA 4
Gate threshold voltage VGS(th) 1.3 1.6 2.3 V VDS=VGS,ID=250µA 4
Zero gate voltage drain current IDSS 0.1 1 µA VDS=40V,VGS=0V,Tj=25°C 4
Zero gate voltage drain current IDSS 10 100 µA VDS=40V,VGS=0V,Tj=125°C 4
Gate-source leakage current IGSS 10 100 nA VGS=20V,VDS=0V 4
Drain-source on-state resistance RDS(on) 1 1.2 mΩ VGS=10V,ID=50A 4
Drain-source on-state resistance RDS(on) 1.4 1.7 mΩ VGS=4.5V,ID=50A 4
Input capacitance Ciss 3500 4600 pF VGS=0V,VDS=20V,f=1MHz 4
Output capacitance Coss 1200 1600 pF VGS=0V,VDS=20V,f=1MHz 4
Reverse transfer capacitance Crss 31 54 pF VGS=0V,VDS=20V,f=1MHz 4
Gate to drain charge Qgd 6.3 9.5 nC VDD=20V,ID=50A,VGS=0to10V 4
Gate charge total Qg 51 64 nC VDD=20V,ID=50A,VGS=0to10V 4
Gate charge total Qg 25 33 nC VGS=0to4.5V 4
Output charge Qoss 56 74 nC VDS=20V,VGS=0V 4
Diode continuous forward current IS 117 A TC=25°C 5
Diode pulse current IS,pulse 952 A TC=25°C 5
Diode forward voltage VSD 0.81 1 V VGS=0V,IF=50A,Tj=25°C 5
Gate resistance RG 0.75 Ω 4
Transconductance gfs 230 S /VDS/≥2/ID/RDS(on)max,ID=50A 4
Turn-on delay time td(on) 8 ns VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω 4
Rise time tr 6 ns VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω 4
Turn-off delay time td(off) 18 ns VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω 4
Fall time tf 5 ns VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω 4
Gate to source charge Qgs 9.6 nC VDD=20V,ID=50A,VGS=0to10V 4
Gate charge at threshold Qg(th) 5.6 nC VDD=20V,ID=50A,VGS=0to10V 4
Switching charge Qsw 10.3 nC VDD=20V,ID=50A,VGS=0to10V 4
Gate plateau voltage Vplateau 2.7 V VDD=20V,ID=50A,VGS=0to10V 4
Gate charge total, sync. FET Qg(sync) 21 nC VDS=0.1V,VGS=0to4.5V 4
Reverse recovery charge Qrr 73 nC VR=20V,IF=50A,diF/dt=100A/µs 5

CAD (Adom-generated)

  • Symbol: ISC012N04LM6ATMA1
  • Footprint: Adom_Gen:Infineon_Technologies_ISC012_c1e27c
  • 3D model: generated to fit the land (STEP)
  • 3D model files: isc012n04lm6atma1-etched.step / isc012n04lm6atma1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isc012n04lm6atma1.step / isc012n04lm6atma1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (12 pp, sha256 551a3367fd5f2c4d, retrieved 2026-11-19)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Land from Infineon ISC012N04LM6 Rev 2.1 Figure 2 'Outline Boardpads (TDSON-8 FL)' p.11, copper panel, dimensions from the package centre: drain copper 4.41 wide, its edge 1.225 from centre on the source side, reaching 3.325 from centre at the lead side (4.55 overall), the lead side cut by three 0.67-wide x 0.8-deep notches leaving four 0.6-wide fingers at 1.27 pitch, outer fingers flush with the 4.41 edges; source pad 3.2 x 1.1, gate pad 0.5 x 1.1, 0.77 gap between them, outer edge 3.325 from centre (so 1.0 copper gap to the drain). The gate pad is centred on lead 4 (1.905 from centre): confirmed by the stencil panel (gate aperture outer edge 2.105, width 0.4, 0.05 inset; source apertures 0.16 beyond lead 1's 0.5-wide foot, source aperture edge 0.87 from the gate aperture), giving source pad -2.315..0.885 along the lead row. Drawn rotated 90 deg from Infineon's top view so pin 1 is top-left, pins 1-4 down the left, drain on the right (pin 5 opposite pin 4). Source pad tiled edge to edge into pads 1/2/3 at the lead pitch midpoints (one copper piece); drain body plus fingers tiled edge to edge, fingers 8/7/6/5 top to bottom, body named 5. Body from Figure 1 p.10: E 5.70-6.10 (5.90 used, across the lead rows), D 4.80-5.35 (5.075 used), A 0.90-1.20 (1.05 used).

Datasheet PDF