Generated by adom_assets · KiCad file format 20240108
ISC012N04LM6ATMA1
Infineon Technologies · MOSFETs · PG-TDSON-8 FL
ISC012N04LM6ATMA1 from Infineon Technologies, in a PG-TDSON-8 FL. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Source | passive | Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land) |
| 2 | Source | passive | Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land) |
| 3 | Source | passive | Source (Source Pin 1-3; leads 1-3 are one fused source lead and one land) |
| 4 | Gate | input | Gate (Gate Pin 4) |
| 5 | Drain | passive | Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5) |
| 6 | Drain | passive | Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5) |
| 7 | Drain | passive | Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5) |
| 8 | Drain | passive | Drain (Drain Pin 5-8; the exposed drain pad is the same copper, drawn as pad 5) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | PG-TDSON-8 FL |
| Category | Transistors/Thyristors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Continuous drain current | ID | 238 | A | VGS=10V,TC=25°C | 3 | ||
| Continuous drain current | ID | 168 | A | VGS=10V,TC=100°C | 3 | ||
| Continuous drain current | ID | 141 | A | VGS=4.5V,TC=100°C | 3 | ||
| Continuous drain current | ID | 37 | A | VGS=10V,TA=25°C,RthJA=50°C/W | 3 | ||
| Pulsed drain current | ID,pulse | 952 | A | TA=25°C | 3 | ||
| Avalanche energy, single pulse | EAS | 219 | mJ | ID=50A,RGS=25Ω | 3 | ||
| Gate source voltage | VGS | -20 | 20 | V | 3 | ||
| Power dissipation | Ptot | 125 | W | TC=25°C | 3 | ||
| Power dissipation | Ptot | 3 | W | TA=25°C,RthJA=50°C/W | 3 | ||
| Operating and storage temperature | Tj,Tstg | -55 | 175 | °C | IEC climatic category; DIN IEC 68-1: 55/175/56 | 3 | |
| Thermal resistance, junction - case, bottom | RthJC | 1.2 | °C/W | 3 | |||
| Thermal resistance, junction - case, top | RthJC | 20 | °C/W | 3 | |||
| Thermal resistance, junction - ambient, 6 cm² cooling area | RthJA | 50 | °C/W | 3 | |||
| Drain-source breakdown voltage | V(BR)DSS | 40 | V | VGS=0V,ID=1mA | 4 | ||
| Gate threshold voltage | VGS(th) | 1.3 | 1.6 | 2.3 | V | VDS=VGS,ID=250µA | 4 |
| Zero gate voltage drain current | IDSS | 0.1 | 1 | µA | VDS=40V,VGS=0V,Tj=25°C | 4 | |
| Zero gate voltage drain current | IDSS | 10 | 100 | µA | VDS=40V,VGS=0V,Tj=125°C | 4 | |
| Gate-source leakage current | IGSS | 10 | 100 | nA | VGS=20V,VDS=0V | 4 | |
| Drain-source on-state resistance | RDS(on) | 1 | 1.2 | mΩ | VGS=10V,ID=50A | 4 | |
| Drain-source on-state resistance | RDS(on) | 1.4 | 1.7 | mΩ | VGS=4.5V,ID=50A | 4 | |
| Input capacitance | Ciss | 3500 | 4600 | pF | VGS=0V,VDS=20V,f=1MHz | 4 | |
| Output capacitance | Coss | 1200 | 1600 | pF | VGS=0V,VDS=20V,f=1MHz | 4 | |
| Reverse transfer capacitance | Crss | 31 | 54 | pF | VGS=0V,VDS=20V,f=1MHz | 4 | |
| Gate to drain charge | Qgd | 6.3 | 9.5 | nC | VDD=20V,ID=50A,VGS=0to10V | 4 | |
| Gate charge total | Qg | 51 | 64 | nC | VDD=20V,ID=50A,VGS=0to10V | 4 | |
| Gate charge total | Qg | 25 | 33 | nC | VGS=0to4.5V | 4 | |
| Output charge | Qoss | 56 | 74 | nC | VDS=20V,VGS=0V | 4 | |
| Diode continuous forward current | IS | 117 | A | TC=25°C | 5 | ||
| Diode pulse current | IS,pulse | 952 | A | TC=25°C | 5 | ||
| Diode forward voltage | VSD | 0.81 | 1 | V | VGS=0V,IF=50A,Tj=25°C | 5 | |
| Gate resistance | RG | 0.75 | Ω | 4 | |||
| Transconductance | gfs | 230 | S | /VDS/≥2/ID/RDS(on)max,ID=50A | 4 | ||
| Turn-on delay time | td(on) | 8 | ns | VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω | 4 | ||
| Rise time | tr | 6 | ns | VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω | 4 | ||
| Turn-off delay time | td(off) | 18 | ns | VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω | 4 | ||
| Fall time | tf | 5 | ns | VDD=20V,VGS=10V,ID=50A,RG,ext=1.6Ω | 4 | ||
| Gate to source charge | Qgs | 9.6 | nC | VDD=20V,ID=50A,VGS=0to10V | 4 | ||
| Gate charge at threshold | Qg(th) | 5.6 | nC | VDD=20V,ID=50A,VGS=0to10V | 4 | ||
| Switching charge | Qsw | 10.3 | nC | VDD=20V,ID=50A,VGS=0to10V | 4 | ||
| Gate plateau voltage | Vplateau | 2.7 | V | VDD=20V,ID=50A,VGS=0to10V | 4 | ||
| Gate charge total, sync. FET | Qg(sync) | 21 | nC | VDS=0.1V,VGS=0to4.5V | 4 | ||
| Reverse recovery charge | Qrr | 73 | nC | VR=20V,IF=50A,diF/dt=100A/µs | 5 |
CAD (Adom-generated)
- Symbol:
ISC012N04LM6ATMA1 - Footprint:
Adom_Gen:Infineon_Technologies_ISC012_c1e27c - 3D model: generated to fit the land (STEP)
- 3D model files:
isc012n04lm6atma1-etched.step/isc012n04lm6atma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isc012n04lm6atma1.step/isc012n04lm6atma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (12 pp, sha256
551a3367fd5f2c4d, retrieved 2026-11-19) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Land from Infineon ISC012N04LM6 Rev 2.1 Figure 2 'Outline Boardpads (TDSON-8 FL)' p.11, copper panel, dimensions from the package centre: drain copper 4.41 wide, its edge 1.225 from centre on the source side, reaching 3.325 from centre at the lead side (4.55 overall), the lead side cut by three 0.67-wide x 0.8-deep notches leaving four 0.6-wide fingers at 1.27 pitch, outer fingers flush with the 4.41 edges; source pad 3.2 x 1.1, gate pad 0.5 x 1.1, 0.77 gap between them, outer edge 3.325 from centre (so 1.0 copper gap to the drain). The gate pad is centred on lead 4 (1.905 from centre): confirmed by the stencil panel (gate aperture outer edge 2.105, width 0.4, 0.05 inset; source apertures 0.16 beyond lead 1's 0.5-wide foot, source aperture edge 0.87 from the gate aperture), giving source pad -2.315..0.885 along the lead row. Drawn rotated 90 deg from Infineon's top view so pin 1 is top-left, pins 1-4 down the left, drain on the right (pin 5 opposite pin 4). Source pad tiled edge to edge into pads 1/2/3 at the lead pitch midpoints (one copper piece); drain body plus fingers tiled edge to edge, fingers 8/7/6/5 top to bottom, body named 5. Body from Figure 1 p.10: E 5.70-6.10 (5.90 used, across the lead rows), D 4.80-5.35 (5.075 used), A 0.90-1.20 (1.05 used).