3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA355QDBVRQ1
Texas Instruments · Operational Amplifier · SOT-23-6
OPA355QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output; it swings to within 100 mV of the rails and goes to a high-impedance state when the amplifier is disabled. |
| 2 | V- | power_in | Negative power supply; with V+ it sets the total supply of 2.7 V to 5.5 V (recommended operating range) and serves as the ground reference for single-supply use. |
| 3 | IN+ | input | Noninverting input; the common-mode input range is (V-) - 0.1 V to (V+) - 1.5 V. |
| 4 | IN- | input | Inverting input pin. |
| 5 | ENABLE | input | Amplifier enable (power down): logic-LOW disables the amplifier with a 0.8 V threshold and logic-HIGH enables it with a 2 V threshold, both referenced to V-; the pin must be driven. |
| 6 | V+ | power_in | Positive power supply; the supply voltage V+ to V- must not exceed the 7.5 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (TA = 25°C) | VOS | -9 | 2 | 9 | mV | VS = 5 V, TA = 25°C | 5 |
| Input offset voltage (TA = -40°C to +125°C) | VOS | -15 | 15 | mV | VS = 5 V, TA = -40°C to +125°C | 5 | |
| Input offset voltage vs temperature (TA = -40°C to +125°C) | DVOS/dT | -7 | 7 | µV/°C | TA = -40°C to +125°C | 5 | |
| Input offset voltage vs power supply (TA = 25°C) | PSRR | -350 | 80 | 350 | µV/V | VS = 2.7 to 5.5 V, VCM = VS / 2, 0.15 V, TA = 25°C | 5 |
| Input bias current (TA = 25°C) | IB | -50 | 3 | 50 | pA | TA = 25°C | 5 |
| Input bias current (TA = -40°C to +125°C) | IB | -50 | 50 | pA | TA = -40°C to +125°C | 5 | |
| Input offset current (TA = 25°C) | IOS | -1 | 1 | pA | TA = 25°C | 5 | |
| Common-mode rejection ratio (TA = 25°C) | CMRR | 66 | 80 | dB | VS = 5.5 V, -0.1 V < VCM < 4 V, TA = 25°C | 5 | |
| Common-mode rejection ratio (TA = -40°C to +125°C) | CMRR | 66 | dB | VS = 5.5 V, -0.1 V < VCM < 4 V, TA = -40°C to +125°C | 5 | ||
| Open-loop gain (TA = 25°C) | 84 | 92 | dB | VS = 5 V, 0.3 V < VO < 4.7 V, TA = 25°C | 5 | ||
| Open-loop gain (TA = -40°C to +125°C) | 80 | dB | VS = 5 V, 0.3 V < VO < 4.7 V, TA = -40°C to +125°C | 5 | |||
| Voltage output swing from rail | 0.2 | 0.3 | V | VS = 5 V, RL = 150 Ω, AOL > 84 dB | 6 | ||
| Output current (continuous) | IO | -60 | 60 | mA | 6 | ||
| Output current (peak), VS = 5 V | IO | -100 | 100 | mA | VS = 5 V, TA = 25°C | 6 | |
| Output current (peak), VS = 3 V | IO | -80 | 80 | mA | VS = 3 V, TA = 25°C | 6 | |
| Specified voltage range | VS | 2.7 | 5.5 | V | TA = 25°C | 6 | |
| Operating voltage range | 2.5 | 5.5 | V | TA = 25°C | 6 | ||
| Quiescent current per amplifier (TA = 25°C) | IQ | 8.3 | 11 | mA | VS = 5 V, enabled; IO = 0, TA = 25°C | 6 | |
| Quiescent current per amplifier (TA = -40°C to +125°C) | IQ | 14 | mA | VS = 5 V, enabled; IO = 0, TA = -40°C to +125°C | 6 | ||
| Logic-LOW threshold (disabled) | 0.8 | V | TA = 25°C | 6 | |||
| Logic-HIGH threshold (enabled) | 2 | V | TA = 25°C | 6 | |||
| Thermal shutdown specified range | -40 | 125 | °C | TA = 25°C | 6 | ||
| Thermal shutdown operating range | -55 | 150 | °C | TA = 25°C | 6 | ||
| Thermal shutdown storage range | -65 | 150 | °C | TA = 25°C | 6 | ||
| Supply voltage V+ to V- | 7.5 | V | 4 | ||||
| Signal input terminals current | 10 | mA | 4 | ||||
| Operating temperature | -55 | 150 | °C | 4 | |||
| Junction temperature | 160 | °C | 4 | ||||
| Lead temperature (soldering) | 300 | °C | soldering, 10 seconds | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Total supply voltage | VS | 2.7 | 5.5 | V | 4 | ||
| Ambient temperature | TA | -40 | 25 | 125 | °C | 4 | |
| Junction-to-ambient thermal resistance | RθJA | 187.3 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 126.5 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 32.6 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 24.1 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 32.1 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
OPA355QDBVRQ1 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
opa355qdbvrq1-etched.step/opa355qdbvrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa355qdbvrq1.step/opa355qdbvrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
71b6ec6ace74d8ed, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).