main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers opa355qdbvrq1: viewers rendered from the public page · Ray
opa355qdbvrq1-etched.glb Publish 0.1.0 · Ray
opa355qdbvrq1-etched.step opa355qdbvrq1: factory component page (tier=mfr) · Ray
opa355qdbvrq1-hero.glb opa355qdbvrq1: hero GLB from the etched model (keeps the MPN mark) · Ray
opa355qdbvrq1-hero.overlay.json Publish 0.1.0 · Ray
opa355qdbvrq1.glb Publish 0.1.0 · Ray
opa355qdbvrq1.kicad_mod Publish 0.1.0 · Ray
opa355qdbvrq1.kicad_sym Publish 0.1.0 · Ray
opa355qdbvrq1.lbr Publish 0.1.0 · Ray
opa355qdbvrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

OPA355QDBVRQ1

Texas Instruments · Operational Amplifier · SOT-23-6

OPA355QDBVRQ1 from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Amplifier output; it swings to within 100 mV of the rails and goes to a high-impedance state when the amplifier is disabled.
2 V- power_in Negative power supply; with V+ it sets the total supply of 2.7 V to 5.5 V (recommended operating range) and serves as the ground reference for single-supply use.
3 IN+ input Noninverting input; the common-mode input range is (V-) - 0.1 V to (V+) - 1.5 V.
4 IN- input Inverting input pin.
5 ENABLE input Amplifier enable (power down): logic-LOW disables the amplifier with a 0.8 V threshold and logic-HIGH enables it with a 2 V threshold, both referenced to V-; the pin must be driven.
6 V+ power_in Positive power supply; the supply voltage V+ to V- must not exceed the 7.5 V absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (TA = 25°C) VOS -9 2 9 mV VS = 5 V, TA = 25°C 5
Input offset voltage (TA = -40°C to +125°C) VOS -15 15 mV VS = 5 V, TA = -40°C to +125°C 5
Input offset voltage vs temperature (TA = -40°C to +125°C) DVOS/dT -7 7 µV/°C TA = -40°C to +125°C 5
Input offset voltage vs power supply (TA = 25°C) PSRR -350 80 350 µV/V VS = 2.7 to 5.5 V, VCM = VS / 2, 0.15 V, TA = 25°C 5
Input bias current (TA = 25°C) IB -50 3 50 pA TA = 25°C 5
Input bias current (TA = -40°C to +125°C) IB -50 50 pA TA = -40°C to +125°C 5
Input offset current (TA = 25°C) IOS -1 1 pA TA = 25°C 5
Common-mode rejection ratio (TA = 25°C) CMRR 66 80 dB VS = 5.5 V, -0.1 V < VCM < 4 V, TA = 25°C 5
Common-mode rejection ratio (TA = -40°C to +125°C) CMRR 66 dB VS = 5.5 V, -0.1 V < VCM < 4 V, TA = -40°C to +125°C 5
Open-loop gain (TA = 25°C) 84 92 dB VS = 5 V, 0.3 V < VO < 4.7 V, TA = 25°C 5
Open-loop gain (TA = -40°C to +125°C) 80 dB VS = 5 V, 0.3 V < VO < 4.7 V, TA = -40°C to +125°C 5
Voltage output swing from rail 0.2 0.3 V VS = 5 V, RL = 150 Ω, AOL > 84 dB 6
Output current (continuous) IO -60 60 mA 6
Output current (peak), VS = 5 V IO -100 100 mA VS = 5 V, TA = 25°C 6
Output current (peak), VS = 3 V IO -80 80 mA VS = 3 V, TA = 25°C 6
Specified voltage range VS 2.7 5.5 V TA = 25°C 6
Operating voltage range 2.5 5.5 V TA = 25°C 6
Quiescent current per amplifier (TA = 25°C) IQ 8.3 11 mA VS = 5 V, enabled; IO = 0, TA = 25°C 6
Quiescent current per amplifier (TA = -40°C to +125°C) IQ 14 mA VS = 5 V, enabled; IO = 0, TA = -40°C to +125°C 6
Logic-LOW threshold (disabled) 0.8 V TA = 25°C 6
Logic-HIGH threshold (enabled) 2 V TA = 25°C 6
Thermal shutdown specified range -40 125 °C TA = 25°C 6
Thermal shutdown operating range -55 150 °C TA = 25°C 6
Thermal shutdown storage range -65 150 °C TA = 25°C 6
Supply voltage V+ to V- 7.5 V 4
Signal input terminals current 10 mA 4
Operating temperature -55 150 °C 4
Junction temperature 160 °C 4
Lead temperature (soldering) 300 °C soldering, 10 seconds 4
Storage temperature range Tstg -65 150 °C 4
Total supply voltage VS 2.7 5.5 V 4
Ambient temperature TA -40 25 125 °C 4
Junction-to-ambient thermal resistance RθJA 187.3 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 126.5 °C/W 4
Junction-to-board thermal resistance RθJB 32.6 °C/W 4
Junction-to-top characterization parameter ψJT 24.1 °C/W 4
Junction-to-board characterization parameter ψJB 32.1 °C/W 4

CAD (KiCad official)

  • Symbol: OPA355QDBVRQ1
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: opa355qdbvrq1-etched.step / opa355qdbvrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa355qdbvrq1.step / opa355qdbvrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 71b6ec6ace74d8ed, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF