component
TLV62095RGTR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV62095RGTR
Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)
TLV62095RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch pin of the power stage for controlling the synchronous step-down converter switching action. |
| 2 | SW | output | Switch pin of the power stage for controlling the synchronous step-down converter switching action. |
| 3 | DEF | input | Internal logic control pin requiring pull-high configuration; must be directly connected to AVIN pin. |
| 4 | PG | tri_state | Power good open-drain output; pulls low when output voltage falls below 90% and high-impedance when above 95%; sink current to 1.0 mA max. |
| 5 | FB | input | Feedback pin for output voltage regulation; accepts divided feedback voltage with regulation voltage 0.8V typical and 0.04%/A load regulation. |
| 6 | AGND | power_in | Analog ground reference for internal analog circuits and external feedback divider network. |
| 7 | CP | passive | Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins. |
| 8 | CN | passive | Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins. |
| 9 | SS | input | Soft-start control pin charged with 7.5µA current; external capacitor sets startup time with floating pin providing minimum ~50µs startup. |
| 10 | AVIN | power_in | Analog supply input voltage pin powering internal analog circuitry and control logic. |
| 11 | PVIN | power_in | Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current. |
| 12 | PVIN | power_in | Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current. |
| 13 | EN | input | Enable input with active pull-down resistor 400kΩ; high level 0.65V min to enable, low level 0.4V max to disable device. |
| 14 | PGND | power_in | Power ground providing return path for power stage switching currents and inductor charging/discharging. |
| 15 | PGND | power_in | Power ground providing return path for power stage switching currents and inductor charging/discharging. |
| 16 | VOS | input | Output voltage sense pin requiring direct connection to converter output for closed-loop regulation; typical discharge resistor 200Ω to ground when disabled. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TLV62095RGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tlv62095rgtr-etched.step/tlv62095rgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62095rgtr.step/tlv62095rgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
1bc69f14c9c7474b, retrieved 2026-09-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).