Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV62095RGTR

Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)

TLV62095RGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switch pin of the power stage for controlling the synchronous step-down converter switching action.
2 SW output Switch pin of the power stage for controlling the synchronous step-down converter switching action.
3 DEF input Internal logic control pin requiring pull-high configuration; must be directly connected to AVIN pin.
4 PG tri_state Power good open-drain output; pulls low when output voltage falls below 90% and high-impedance when above 95%; sink current to 1.0 mA max.
5 FB input Feedback pin for output voltage regulation; accepts divided feedback voltage with regulation voltage 0.8V typical and 0.04%/A load regulation.
6 AGND power_in Analog ground reference for internal analog circuits and external feedback divider network.
7 CP passive Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins.
8 CN passive Charge pump flying capacitor node; connect external 10nF capacitor between CP and CN pins.
9 SS input Soft-start control pin charged with 7.5µA current; external capacitor sets startup time with floating pin providing minimum ~50µs startup.
10 AVIN power_in Analog supply input voltage pin powering internal analog circuitry and control logic.
11 PVIN power_in Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current.
12 PVIN power_in Power supply input voltage pin; rated 2.5V to 5.5V with typical quiescent current 20µA and 0.6µA shutdown current.
13 EN input Enable input with active pull-down resistor 400kΩ; high level 0.65V min to enable, low level 0.4V max to disable device.
14 PGND power_in Power ground providing return path for power stage switching currents and inductor charging/discharging.
15 PGND power_in Power ground providing return path for power stage switching currents and inductor charging/discharging.
16 VOS input Output voltage sense pin requiring direct connection to converter output for closed-loop regulation; typical discharge resistor 200Ω to ground when disabled.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Power Management (PMIC)
Pins 17

CAD (KiCad official)

  • Symbol: TLV62095RGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: tlv62095rgtr-etched.step / tlv62095rgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62095rgtr.step / tlv62095rgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (29 pp, sha256 1bc69f14c9c7474b, retrieved 2026-09-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF