component
STM708TAM6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM708TAM6F
STMicroelectronics · Supervisor And Reset ICs · SOIC-8
STM708TAM6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Push-button reset input: a logic low asserts reset, reset stays asserted while MR is low and for trec after it returns high, and it has an internal 40 kΩ pull-up so it may be left open or tied to VCC. |
| 2 | VCC | power_in | Supply voltage monitored against the reset threshold VRST; the operating range is 1.2 V to 5.5 V (1.0 V minimum for TA = 0 °C to 85 °C) per Table 6. |
| 3 | VSS | power_in | Ground reference for the device. |
| 4 | PFI | input | Power-fail input compared to an internal reference VPFI (1.20 V to 1.30 V); PFO goes low when PFI falls below VPFI, and PFI should be connected to VSS if the comparator is unused. |
| 5 | PFO | output | Power-fail output (push-pull) that goes low when PFI is below VPFI; it must not be forced low by a processor, and it may be left open if unused. |
| 6 | NC | unconnected | No internal connection on the STM708T/S/R SO8 package. |
| 7 | RST | output | Active-low reset output that is held low while VCC is below VRST or MR is low, and for trec after VCC returns above the reset threshold, the watchdog triggers, or MR goes high; it is guaranteed valid down to VCC = 1 V. |
| 8 | RST | output | Active-high reset output that is held high while VCC is below VRST or MR is low, and for trec after reset release; it is guaranteed to be a logic high for VCC < VRST down to VCC = 1 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
STM708TAM6F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
stm708tam6f-etched.step/stm708tam6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm708tam6f.step/stm708tam6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (32 pp, sha256
fe2adb0e76018e05, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).