3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSCT2230CTVBR
SCT · DC-DC Converters · TSOT-23-6
SCT2230CTVBR from SCT, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power ground. Must be soldered directly to ground plane. |
| 2 | SW | output | Power switching output. SW is the switching node that supplies power to the output. Connect the output LC filter from SW to the output load. A capacitor is required from SW to BST to power the high-side switch. Absolute max -1V to VIN+0.3V. |
| 3 | VIN | power_in | Power supply input. VIN supplies power to the IC as well as the step-down converter switches. Drive VIN with a 4.2V to 17V power source. Bypass VIN to GND with a suitably large capacitor to eliminate input noise. Absolute max -0.3V to 18V. |
| 4 | FB | input | Buck converter output feedback sensing voltage. Connect a resistor divider from VOUT to FB to set output voltage. The device regulates FB to the internal reference of 0.8V typical. |
| 5 | EN | input | Enable logic input. Floating the pin enables the device. Precision enable thresholds 1.2V rising / 1.1V falling for programmable UVLO threshold and hysteresis. Absolute max -0.3V to 6.5V. |
| 6 | BST | passive | Bootstrap supply for the high-side power MOSFET gate driver. Must connect a 0.1uF or greater ceramic capacitor between BST pin and SW node. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SCT |
| Package | TSOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
SCT2230CTVBR
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (absolute maximum) | VIN | -0.3 | 18 | V | Over operating free-air temperature | 2 | |
| Switching node voltage (absolute maximum) | VSW | -1 | V | Printed maximum is VIN+0.3 V (relative to VIN, no fixed number) | 2 | ||
| Feedback voltage (absolute maximum) | VFB | -0.3 | 6.5 | V | Over operating free-air temperature | 2 | |
| Enable voltage (absolute maximum) | VEN | -0.3 | 6.5 | V | Over operating free-air temperature | 2 | |
| Operating junction temperature (absolute maximum) | TJ | -40 | 125 | °C | Over operating free-air temperature | 2 | |
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| Input voltage range | VIN | 4.2 | 17 | V | Over operating free-air temperature range | 3 | |
| Operating junction temperature | TJ | -40 | 125 | °C | Over operating free-air temperature range | 3 | |
| ESD Human Body Model (HBM), all pins | VESD | -2 | 2 | kV | Per ANSI-JEDEC-JS-001-2014 | 3 | |
| ESD Charged Device Model (CDM), all pins | VESD | -0.5 | 0.5 | kV | Per ANSI-JEDEC-JS-002-2014 | 3 | |
| Operating input voltage | VIN | 4.2 | 17 | V | 4 | ||
| Input UVLO threshold (VIN rising) | VIN_UVLO | 3.9 | 4.15 | V | VIN rising | 4 | |
| Enable high threshold | VEN_H | 1.2 | 1.25 | V | 4 | ||
| Enable low threshold | VEN_L | 1.03 | 1.1 | V | 4 | ||
| Enable pin input current | IEN | 1 | 1.5 | 2 | uA | EN=1V | 4 |
| Feedback voltage | VFB | 0.78 | 0.8 | 0.82 | V | 4 | |
| LSD valley current limit | ILIM_LSD | 3.2 | 3.7 | 4.2 | A | 4 | |
| Hysteresis (input UVLO) | 300 | mV | 4 | ||||
| Shutdown current | ISD | 1.5 | 5 | uA | EN=0, No load, VIN=12V | 4 | |
| Quiescent current | IQ | 135 | uA | EN=2V, No load, No switching. VIN=12V. BST-SW=5V | 4 | ||
| Enable pin input current | IEN | 6.8 | uA | EN=1.5V | 4 | ||
| High side FET on-resistance | RDSON_H | 90 | mΩ | 4 | |||
| Low side FET on-resistance | RDSON_L | 54 | mΩ | 4 | |||
| Switching frequency | FSW | 750 | kHz | VIN=12V, VOUT=5V | 4 | ||
| Minimum on-time (derived from bench characterization) | tON_MIN | 90 | ns | 4 | |||
| Minimum off-time | tOFF_MIN | 220 | ns | 4 | |||
| Internal soft-start time | tSS | 2.5 | ms | 4 | |||
| Thermal shutdown threshold (derived from bench characterization) | TSD | 160 | °C | TJ rising | 4 | ||
| Thermal shutdown hysteresis | 20 | 4 | |||||
| Junction to ambient thermal resistance (TSOT23-6) | RθJA | 88 | °C/W | TSOT23-6 package, reference only, board dependent | 3 | ||
| Junction to case thermal resistance (TSOT23-6) | RθJC | 12 | °C/W | TSOT23-6 package, reference only | 3 |
CAD (KiCad official)
- Symbol:
SCT2230CTVBR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sct2230ctvbr-etched.step/sct2230ctvbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sct2230ctvbr.step/sct2230ctvbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SCT datasheet (16 pp, sha256
0968e867ea2eea63, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).