Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SCT2230CTVBR

SCT · DC-DC Converters · TSOT-23-6

SCT2230CTVBR from SCT, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Power ground. Must be soldered directly to ground plane.
2 SW output Power switching output. SW is the switching node that supplies power to the output. Connect the output LC filter from SW to the output load. A capacitor is required from SW to BST to power the high-side switch. Absolute max -1V to VIN+0.3V.
3 VIN power_in Power supply input. VIN supplies power to the IC as well as the step-down converter switches. Drive VIN with a 4.2V to 17V power source. Bypass VIN to GND with a suitably large capacitor to eliminate input noise. Absolute max -0.3V to 18V.
4 FB input Buck converter output feedback sensing voltage. Connect a resistor divider from VOUT to FB to set output voltage. The device regulates FB to the internal reference of 0.8V typical.
5 EN input Enable logic input. Floating the pin enables the device. Precision enable thresholds 1.2V rising / 1.1V falling for programmable UVLO threshold and hysteresis. Absolute max -0.3V to 6.5V.
6 BST passive Bootstrap supply for the high-side power MOSFET gate driver. Must connect a 0.1uF or greater ceramic capacitor between BST pin and SW node.

Key specifications

Parameter Value
Manufacturer SCT
Package TSOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • SCT2230CTVBR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage (absolute maximum) VIN -0.3 18 V Over operating free-air temperature 2
Switching node voltage (absolute maximum) VSW -1 V Printed maximum is VIN+0.3 V (relative to VIN, no fixed number) 2
Feedback voltage (absolute maximum) VFB -0.3 6.5 V Over operating free-air temperature 2
Enable voltage (absolute maximum) VEN -0.3 6.5 V Over operating free-air temperature 2
Operating junction temperature (absolute maximum) TJ -40 125 °C Over operating free-air temperature 2
Storage temperature TSTG -65 150 °C 2
Input voltage range VIN 4.2 17 V Over operating free-air temperature range 3
Operating junction temperature TJ -40 125 °C Over operating free-air temperature range 3
ESD Human Body Model (HBM), all pins VESD -2 2 kV Per ANSI-JEDEC-JS-001-2014 3
ESD Charged Device Model (CDM), all pins VESD -0.5 0.5 kV Per ANSI-JEDEC-JS-002-2014 3
Operating input voltage VIN 4.2 17 V 4
Input UVLO threshold (VIN rising) VIN_UVLO 3.9 4.15 V VIN rising 4
Enable high threshold VEN_H 1.2 1.25 V 4
Enable low threshold VEN_L 1.03 1.1 V 4
Enable pin input current IEN 1 1.5 2 uA EN=1V 4
Feedback voltage VFB 0.78 0.8 0.82 V 4
LSD valley current limit ILIM_LSD 3.2 3.7 4.2 A 4
Hysteresis (input UVLO) 300 mV 4
Shutdown current ISD 1.5 5 uA EN=0, No load, VIN=12V 4
Quiescent current IQ 135 uA EN=2V, No load, No switching. VIN=12V. BST-SW=5V 4
Enable pin input current IEN 6.8 uA EN=1.5V 4
High side FET on-resistance RDSON_H 90 mΩ 4
Low side FET on-resistance RDSON_L 54 mΩ 4
Switching frequency FSW 750 kHz VIN=12V, VOUT=5V 4
Minimum on-time (derived from bench characterization) tON_MIN 90 ns 4
Minimum off-time tOFF_MIN 220 ns 4
Internal soft-start time tSS 2.5 ms 4
Thermal shutdown threshold (derived from bench characterization) TSD 160 °C TJ rising 4
Thermal shutdown hysteresis 20 4
Junction to ambient thermal resistance (TSOT23-6) RθJA 88 °C/W TSOT23-6 package, reference only, board dependent 3
Junction to case thermal resistance (TSOT23-6) RθJC 12 °C/W TSOT23-6 package, reference only 3

CAD (KiCad official)

  • Symbol: SCT2230CTVBR
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: sct2230ctvbr-etched.step / sct2230ctvbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sct2230ctvbr.step / sct2230ctvbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SCT datasheet (16 pp, sha256 0968e867ea2eea63, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF