3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADAU7112ACBZR7
Analog Devices · Analog To Digital Converters (ADCs) · WLCSP-9(1.3x1.3)
ADAU7112ACBZR7 from Analog Devices, in a WLCSP-9(1.3x1.3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| A1 | DVDD | power_in | Internal core digital power supply, specified from 1.10 V to 1.98 V. |
| A2 | GND | power_in | Ground reference for the device. |
| A3 | IOVDD | power_in | Digital I/O power supply for pads and level shifters, specified from 1.70 V to 3.63 V. |
| B1 | SDATA | output | I2S/TDM serial data output that is tristate high impedance except while the port is driving serial data. |
| B2 | CONFIG | input | Configuration pin that selects I2S format when tied to IOVDD or one of the TDM slot pairs when tied to GND, left open, or tied through a 47 kΩ resistor to IOVDD or GND. |
| B3 | PDM_DAT | input | PDM input data from the PDM sources, with setup time of 9 ns and hold time of 3 ns relative to PDM_CLK. |
| C1 | FSYNC | input | I2S/TDM frame synchronization or left/right clock input, with 96 kHz maximum FSYNC frequency in slave mode. |
| C2 | BCLK | input | I2S/TDM bit clock input, with 24.576 MHz maximum BCLK frequency. |
| C3 | PDM_CLK | output | PDM output clock generated automatically at 64× the FSYNC rate, in the range 256 kHz to 6.144 MHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | WLCSP-9(1.3x1.3) |
| Category | Data Converters |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Digital Core Voltage (DVDD Pin) | 1.1 | 1.98 | V | Supply for digital circuitry | 3 | ||
| Input/Output (I/O) Supply Voltage (IOVDD Pin) | 1.7 | 3.63 | V | Supply for I/O circuitry, including pads and level shifters | 3 | ||
| Maximum Operating Ambient Temperature Range | TA | -40 | 85 | °C | Commercial temperature range | 1 | |
| Output Sampling Rate | fS | 4 | 48 | 96 | kHz | FSYNC pulse rate | 3 |
| Bit Clock Frequency | fBCLK | 0.256 | 12.288 | 24.576 | MHz | 3 | |
| PDM_CLK Frequency | fPDM_CLK | 0.256 | 3.072 | 6.144 | MHz | 3 | |
| Frequency Response | -0.1 | 0.01 | dB | DC to 0.45 × output sampling rate | 3 | ||
| Gain | 0 | 0 | 0 | dB | PDM to PCM | 3 | |
| Group Delay | 4.47 | 4.47 | 4.47 | FSYNC cycles | 0.02 fS input signal | 3 | |
| Start-Up Time | 63 | 64 | 64 | FSYNC cycles | After power-up reset and initialization code is run | 3 | |
| Interchannel Phase | 0 | 0 | 0 | Degrees | 3 | ||
| DVDD to GND | 1.98 | V | 6 | ||||
| IOVDD to GND | 3.63 | V | 6 | ||||
| Maximum Operating Ambient Temperature Range | -40 | 85 | °C | 6 | |||
| Junction Temperature Range | -65 | 165 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Soldering Temperature | 300 | °C | 60 sec | 6 | |||
| Electrostatic Discharge (ESD) Susceptibility | 4.5 | kV | 6 | ||||
| Thermal Resistance, junction-to-ambient | θJA | 57.1 | °C/W | JEDEC 1S0P thermal test board, JESD-51 (simulated), package CB-9-8 | 6 | ||
| Thermal Resistance, junction-to-case | θJC | 0.5 | °C/W | JEDEC 2S2P thermal test board with four thermal vias, JESD-51 (simulated), package CB-9-8 | 6 |
CAD (KiCad official)
- Symbol:
ADAU7112ACBZR7 - Footprint:
Package_CSP:WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm - 3D model: WLCSP-9(1.3x1.3) (KiCad packages3D, STEP)
- 3D model files:
adau7112acbzr7-etched.step/adau7112acbzr7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adau7112acbzr7.step/adau7112acbzr7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
2039bf3b48974218, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).