main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs adau7112acbzr7: factory component page (tier=mfr) · Ray
viewers adau7112acbzr7: viewers · Ray
adau7112acbzr7-etched.glb Publish 0.1.0 · Ray
adau7112acbzr7-etched.step adau7112acbzr7: factory component page (tier=mfr) · Ray
adau7112acbzr7-hero.glb adau7112acbzr7: hero GLB from the etched model (keeps the MPN mark) · Ray
adau7112acbzr7-hero.overlay.json adau7112acbzr7: hero GLB from the etched model (keeps the MPN mark) · Ray
adau7112acbzr7.glb Publish 0.1.0 · Ray
adau7112acbzr7.kicad_mod Publish 0.1.3 · Ray
adau7112acbzr7.kicad_sym Publish 0.1.3 · Ray
adau7112acbzr7.lbr Publish 0.1.3 · Ray
adau7112acbzr7.step Publish 0.1.0 · Ray
package.json Publish 0.1.3 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.3 · Ray
verification.json Verified: Rebuilt by the parts factory: tier mfr, 9 pins · Ray

ADAU7112ACBZR7

Analog Devices · Analog To Digital Converters (ADCs) · WLCSP-9(1.3x1.3)

ADAU7112ACBZR7 from Analog Devices, in a WLCSP-9(1.3x1.3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
A1 DVDD power_in Internal core digital power supply, specified from 1.10 V to 1.98 V.
A2 GND power_in Ground reference for the device.
A3 IOVDD power_in Digital I/O power supply for pads and level shifters, specified from 1.70 V to 3.63 V.
B1 SDATA output I2S/TDM serial data output that is tristate high impedance except while the port is driving serial data.
B2 CONFIG input Configuration pin that selects I2S format when tied to IOVDD or one of the TDM slot pairs when tied to GND, left open, or tied through a 47 kΩ resistor to IOVDD or GND.
B3 PDM_DAT input PDM input data from the PDM sources, with setup time of 9 ns and hold time of 3 ns relative to PDM_CLK.
C1 FSYNC input I2S/TDM frame synchronization or left/right clock input, with 96 kHz maximum FSYNC frequency in slave mode.
C2 BCLK input I2S/TDM bit clock input, with 24.576 MHz maximum BCLK frequency.
C3 PDM_CLK output PDM output clock generated automatically at 64× the FSYNC rate, in the range 256 kHz to 6.144 MHz.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package WLCSP-9(1.3x1.3)
Category Data Converters
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Digital Core Voltage (DVDD Pin) 1.1 1.98 V Supply for digital circuitry 3
Input/Output (I/O) Supply Voltage (IOVDD Pin) 1.7 3.63 V Supply for I/O circuitry, including pads and level shifters 3
Maximum Operating Ambient Temperature Range TA -40 85 °C Commercial temperature range 1
Output Sampling Rate fS 4 48 96 kHz FSYNC pulse rate 3
Bit Clock Frequency fBCLK 0.256 12.288 24.576 MHz 3
PDM_CLK Frequency fPDM_CLK 0.256 3.072 6.144 MHz 3
Frequency Response -0.1 0.01 dB DC to 0.45 × output sampling rate 3
Gain 0 0 0 dB PDM to PCM 3
Group Delay 4.47 4.47 4.47 FSYNC cycles 0.02 fS input signal 3
Start-Up Time 63 64 64 FSYNC cycles After power-up reset and initialization code is run 3
Interchannel Phase 0 0 0 Degrees 3
DVDD to GND 1.98 V 6
IOVDD to GND 3.63 V 6
Maximum Operating Ambient Temperature Range -40 85 °C 6
Junction Temperature Range -65 165 °C 6
Storage Temperature Range -65 150 °C 6
Soldering Temperature 300 °C 60 sec 6
Electrostatic Discharge (ESD) Susceptibility 4.5 kV 6
Thermal Resistance, junction-to-ambient θJA 57.1 °C/W JEDEC 1S0P thermal test board, JESD-51 (simulated), package CB-9-8 6
Thermal Resistance, junction-to-case θJC 0.5 °C/W JEDEC 2S2P thermal test board with four thermal vias, JESD-51 (simulated), package CB-9-8 6

CAD (KiCad official)

  • Symbol: ADAU7112ACBZR7
  • Footprint: Package_CSP:WLCSP-9_1.21x1.22mm_Layout3x3_P0.4mm
  • 3D model: WLCSP-9(1.3x1.3) (KiCad packages3D, STEP)
  • 3D model files: adau7112acbzr7-etched.step / adau7112acbzr7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adau7112acbzr7.step / adau7112acbzr7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 2039bf3b48974218, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF