3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA821IDRGT
Texas Instruments · Instrumentation Amplifiers · WSON-8-EP(3x3)
INA821IDRGT from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Negative (inverting) input; inputs are protected up to ±40 V and the common-mode input range is (V-) + 2 V to (V+) - 2 V. |
| 2 | RG | input | Gain setting pin; place a gain resistor between pin 2 and pin 3 (G = 1 + 49.4 kΩ / RG, with no resistor for G = 1). |
| 3 | RG | input | Gain setting pin; place a gain resistor between pin 2 and pin 3 (G = 1 + 49.4 kΩ / RG, with no resistor for G = 1). |
| 4 | +IN | input | Positive (noninverting) input; inputs are protected up to ±40 V and the common-mode input range is (V-) + 2 V to (V+) - 2 V. |
| 5 | -VS | power_in | Negative supply; single-supply range 4.5 V to 36 V or dual-supply ±2.25 V to ±18 V. |
| 6 | REF | input | Reference input that must be driven by a low-impedance source; the output is referred to this pin, and source impedance should be kept below 5 Ω for best CMRR. |
| 7 | OUT | output | Output; swings within (V-) + 0.15 V to (V+) - 0.15 V and is stable with up to 1000 pF load capacitance. |
| 8 | +VS | power_in | Positive supply; single-supply range 4.5 V to 36 V or dual-supply ±2.25 V to ±18 V. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | -20 | 20 | V | 5 | |||
| Signal input pins voltage | -40 | 40 | V | 5 | |||
| REF pin voltage | -20 | 20 | V | REF pin | 5 | ||
| Operating temperature | TA | -50 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Junction temperature | TJ | 175 | °C | 5 | |||
| Supply voltage, single-supply | VS | 4.5 | 36 | V | Single-supply | 5 | |
| Supply voltage, dual-supply | VS | 2.25 | 18 | V | Dual-supply (printed ±2.25 V to ±18 V) | 5 | |
| Specified temperature | TA | -40 | 125 | °C | Specified temperature | 5 | |
| Input stage offset voltage | VOSI | 10 | 35 | µV | 6 | ||
| Input stage offset voltage over temperature | VOSI | 75 | µV | TA = -40°C to +125°C | 6 | ||
| Input stage offset voltage drift | VOSI | 0.1 | 0.4 | µV/°C | vs temperature, TA = -40°C to +125°C | 6 | |
| Output stage offset voltage | VOSO | 50 | 400 | µV | 6 | ||
| Output stage offset voltage over temperature | VOSO | 850 | µV | TA = -40°C to +125°C | 6 | ||
| Power-supply rejection ratio, G = 1 | PSRR | 110 | 120 | dB | G = 1, RTI | 6 | |
| Power-supply rejection ratio, G = 10 | PSRR | 114 | 130 | dB | G = 10, RTI | 6 | |
| Power-supply rejection ratio, G = 100 | PSRR | 130 | 135 | dB | G = 100, RTI | 6 | |
| Power-supply rejection ratio, G = 1000 | PSRR | 136 | 140 | dB | G = 1000, RTI | 6 | |
| Input overvoltage range | -40 | 40 | V | TA = -40°C to +125°C | 6 | ||
| Common-mode rejection ratio, G = 1 | CMRR | 92 | 105 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1 | 6 | |
| Common-mode rejection ratio, G = 10 | CMRR | 112 | 125 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 10 | 6 | |
| Common-mode rejection ratio, G = 100 | CMRR | 132 | 145 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 100 | 6 | |
| Common-mode rejection ratio, G = 1000 | CMRR | 140 | 150 | dB | At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1000 | 6 | |
| Input bias current | IB | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 | |
| Input bias current over temperature | IB | 2 | nA | TA = -40°C to +125°C | 6 | ||
| Input offset current | IOS | 0.15 | 0.5 | nA | VCM = VS / 2 | 6 | |
| Input offset current over temperature | IOS | 2 | nA | TA = -40°C to +125°C | 6 | ||
| Gain error, G = 1 | GE | -0.025 | 0.005 | 0.025 | % | G = 1, VO = ±10 V | 7 |
| Gain error, G = 10 | GE | -0.15 | 0.025 | 0.15 | % | G = 10, VO = ±10 V | 7 |
| Gain error, G = 100 | GE | -0.15 | 0.025 | 0.15 | % | G = 100, VO = ±10 V | 7 |
| Gain error, G = 1000 | GE | -0.05 | 0.05 | % | G = 1000, VO = ±10 V | 7 | |
| Gain vs temperature, G = 1 | -5 | 5 | ppm/°C | G = 1, TA = -40°C to +125°C | 7 | ||
| Gain vs temperature, G > 1 | -35 | 35 | ppm/°C | G > 1, TA = -40°C to +125°C | 7 | ||
| Gain nonlinearity, G = 1 to 10 | 1 | 10 | ppm | G = 1 to 10, VO = -10 V to 10 V, RL = 10 kΩ | 7 | ||
| Short-circuit current | ISC | -20 | 20 | mA | Continuous to VS / 2 | 7 | |
| Quiescent current | IQ | 600 | 650 | µA | VIN = 0 V | 7 | |
| Quiescent current over temperature | IQ | 870 | µA | vs temperature, TA = -40°C to +125°C | 7 | ||
| Junction-to-ambient thermal resistance | RθJA | 55.6 | °C/W | DRG (WSON) package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 57.9 | °C/W | DRG (WSON) package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 28.6 | °C/W | DRG (WSON) package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 1.8 | °C/W | DRG (WSON) package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 28.6 | °C/W | DRG (WSON) package | 5 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 12.1 | °C/W | DRG (WSON) package | 5 |
CAD (KiCad official)
- Symbol:
INA821IDRGT - Footprint:
Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm - 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ina821idrgt-etched.step/ina821idrgt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina821idrgt.step/ina821idrgt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
9acfe455263ae271, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).