main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ina821idrgt: viewers rendered from the public page · Ray
ina821idrgt-etched.glb Publish 0.1.0 · Ray
ina821idrgt-etched.step ina821idrgt: factory component page (tier=mfr) · Ray
ina821idrgt-hero.glb ina821idrgt: hero GLB from the etched model (keeps the MPN mark) · Ray
ina821idrgt-hero.overlay.json Publish 0.1.0 · Ray
ina821idrgt.glb Publish 0.1.0 · Ray
ina821idrgt.kicad_mod Publish 0.1.0 · Ray
ina821idrgt.kicad_sym Publish 0.1.0 · Ray
ina821idrgt.lbr Publish 0.1.0 · Ray
ina821idrgt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

INA821IDRGT

Texas Instruments · Instrumentation Amplifiers · WSON-8-EP(3x3)

INA821IDRGT from Texas Instruments, in a WSON-8-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 -IN input Negative (inverting) input; inputs are protected up to ±40 V and the common-mode input range is (V-) + 2 V to (V+) - 2 V.
2 RG input Gain setting pin; place a gain resistor between pin 2 and pin 3 (G = 1 + 49.4 kΩ / RG, with no resistor for G = 1).
3 RG input Gain setting pin; place a gain resistor between pin 2 and pin 3 (G = 1 + 49.4 kΩ / RG, with no resistor for G = 1).
4 +IN input Positive (noninverting) input; inputs are protected up to ±40 V and the common-mode input range is (V-) + 2 V to (V+) - 2 V.
5 -VS power_in Negative supply; single-supply range 4.5 V to 36 V or dual-supply ±2.25 V to ±18 V.
6 REF input Reference input that must be driven by a low-impedance source; the output is referred to this pin, and source impedance should be kept below 5 Ω for best CMRR.
7 OUT output Output; swings within (V-) + 0.15 V to (V+) - 0.15 V and is stable with up to 1000 pF load capacitance.
8 +VS power_in Positive supply; single-supply range 4.5 V to 36 V or dual-supply ±2.25 V to ±18 V.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(3x3)
Category Amplifiers/Comparators
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage -20 20 V 5
Signal input pins voltage -40 40 V 5
REF pin voltage -20 20 V REF pin 5
Operating temperature TA -50 150 °C 5
Storage temperature Tstg -65 150 °C 5
Junction temperature TJ 175 °C 5
Supply voltage, single-supply VS 4.5 36 V Single-supply 5
Supply voltage, dual-supply VS 2.25 18 V Dual-supply (printed ±2.25 V to ±18 V) 5
Specified temperature TA -40 125 °C Specified temperature 5
Input stage offset voltage VOSI 10 35 µV 6
Input stage offset voltage over temperature VOSI 75 µV TA = -40°C to +125°C 6
Input stage offset voltage drift VOSI 0.1 0.4 µV/°C vs temperature, TA = -40°C to +125°C 6
Output stage offset voltage VOSO 50 400 µV 6
Output stage offset voltage over temperature VOSO 850 µV TA = -40°C to +125°C 6
Power-supply rejection ratio, G = 1 PSRR 110 120 dB G = 1, RTI 6
Power-supply rejection ratio, G = 10 PSRR 114 130 dB G = 10, RTI 6
Power-supply rejection ratio, G = 100 PSRR 130 135 dB G = 100, RTI 6
Power-supply rejection ratio, G = 1000 PSRR 136 140 dB G = 1000, RTI 6
Input overvoltage range -40 40 V TA = -40°C to +125°C 6
Common-mode rejection ratio, G = 1 CMRR 92 105 dB At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1 6
Common-mode rejection ratio, G = 10 CMRR 112 125 dB At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 10 6
Common-mode rejection ratio, G = 100 CMRR 132 145 dB At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 100 6
Common-mode rejection ratio, G = 1000 CMRR 140 150 dB At DC to 60 Hz, RTI, VCM = (V-) + 2 V to (V+), 2 V, G = 1000 6
Input bias current IB 0.15 0.5 nA VCM = VS / 2 6
Input bias current over temperature IB 2 nA TA = -40°C to +125°C 6
Input offset current IOS 0.15 0.5 nA VCM = VS / 2 6
Input offset current over temperature IOS 2 nA TA = -40°C to +125°C 6
Gain error, G = 1 GE -0.025 0.005 0.025 % G = 1, VO = ±10 V 7
Gain error, G = 10 GE -0.15 0.025 0.15 % G = 10, VO = ±10 V 7
Gain error, G = 100 GE -0.15 0.025 0.15 % G = 100, VO = ±10 V 7
Gain error, G = 1000 GE -0.05 0.05 % G = 1000, VO = ±10 V 7
Gain vs temperature, G = 1 -5 5 ppm/°C G = 1, TA = -40°C to +125°C 7
Gain vs temperature, G > 1 -35 35 ppm/°C G > 1, TA = -40°C to +125°C 7
Gain nonlinearity, G = 1 to 10 1 10 ppm G = 1 to 10, VO = -10 V to 10 V, RL = 10 kΩ 7
Short-circuit current ISC -20 20 mA Continuous to VS / 2 7
Quiescent current IQ 600 650 µA VIN = 0 V 7
Quiescent current over temperature IQ 870 µA vs temperature, TA = -40°C to +125°C 7
Junction-to-ambient thermal resistance RθJA 55.6 °C/W DRG (WSON) package 5
Junction-to-case (top) thermal resistance RθJC(top) 57.9 °C/W DRG (WSON) package 5
Junction-to-board thermal resistance RθJB 28.6 °C/W DRG (WSON) package 5
Junction-to-top characterization parameter ψJT 1.8 °C/W DRG (WSON) package 5
Junction-to-board characterization parameter ψJB 28.6 °C/W DRG (WSON) package 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 12.1 °C/W DRG (WSON) package 5

CAD (KiCad official)

  • Symbol: INA821IDRGT
  • Footprint: Package_SON:WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm
  • 3D model: WSON-8-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ina821idrgt-etched.step / ina821idrgt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina821idrgt.step / ina821idrgt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (50 pp, sha256 9acfe455263ae271, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF