Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT6232CGN#PBF

Analog Devices · Pre-ordered Chips · SSOP-16-150mil

LT6232CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output, rail-to-rail, swinging within 50mV of either supply with 30mA output current.
2 -IN A input Amplifier A inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
3 +IN A input Amplifier A non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
4 V+ power_in Positive supply, with total supply voltage V+ to V- from 3V minimum to 12.6V maximum.
5 +IN B input Amplifier B non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
6 -IN B input Amplifier B inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
7 OUT B output Amplifier B output, rail-to-rail, swinging within 50mV of either supply with 30mA output current.
8 NC unconnected No internal connection.
9 NC unconnected No internal connection.
10 OUT C output Amplifier C output, rail-to-rail, swinging within 50mV of either supply with 30mA output current.
11 -IN C input Amplifier C inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
12 +IN C input Amplifier C non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
13 V- power_in Negative supply (ground in single-supply use), with total supply voltage V+ to V- from 3V minimum to 12.6V maximum.
14 +IN D input Amplifier D non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
15 -IN D input Amplifier D inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA.
16 OUT D output Amplifier D output, rail-to-rail, swinging within 50mV of either supply with 30mA output current.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (LT6232GN) VOS 50 350 µV TA = 25°C, VS = 5V, 0V 3
Input Offset Voltage Match (Channel-to-Channel) VOS 100 600 µV TA = 25°C; Note 6 3
Input Bias Current IB 5 10 µA TA = 25°C 3
Input Offset Current IOS 0.1 0.6 µA TA = 25°C 3
Input Noise Voltage Density en 1.1 1.7 nV/√Hz f = 10kHz, VS = 5V 3
Large-Signal Gain AVOL 105 200 V/mV TA = 25°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 3
Common Mode Rejection Ratio CMRR 90 115 dB TA = 25°C; VS = 5V, VCM = 1.5V to 4V 3
Slew Rate SR 42 60 V/µs TA = 25°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V 4
Full-Power Bandwidth FPBW 4.8 6.3 MHz TA = 25°C; VS = 5V, VOUT = 3VP-P 4
Input Offset Voltage Drift VOS TC 0.5 3 µV/°C 0°C < TA < 70°C; VCM = Half Supply; not 100% tested 5
Input Offset Voltage (LT6232CGN) VOS 450 µV 0°C < TA < 70°C 5
Input Offset Voltage Match (Channel-to-Channel) VOS 800 µV 0°C < TA < 70°C; Note 6 5
Input Bias Current IB 11 µA 0°C < TA < 70°C 5
Input Offset Current IOS 0.7 µA 0°C < TA < 70°C 5
Large-Signal Gain AVOL 78 V/mV 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 5
Large-Signal Gain AVOL 17 V/mV 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 5
Large-Signal Gain AVOL 66 V/mV 0°C < TA < 70°C; VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 5
Common Mode Rejection Ratio CMRR 90 dB 0°C < TA < 70°C; VS = 5V, VCM = 1.5V to 4V 5
Common Mode Rejection Ratio CMRR 85 dB 0°C < TA < 70°C; VS = 3.3V, VCM = 1.15V to 2.65V 5
Power Supply Rejection Ratio PSRR 85 dB 0°C < TA < 70°C; VS = 3V to 10V 5
Minimum Supply Voltage 3 V 0°C < TA < 70°C; Note 7 5
Output Voltage Swing Low (No Load) VOL 50 mV 0°C < TA < 70°C; No load 5
Output Voltage Swing Low VOL 200 mV 0°C < TA < 70°C; ISINK = 5mA 5
Output Voltage Swing Low VOL 500 mV 0°C < TA < 70°C; VS = 5V, ISINK = 20mA 5
Output Voltage Swing High (No Load) VOH 60 mV 0°C < TA < 70°C; No load 5
Output Voltage Swing High VOH 215 mV 0°C < TA < 70°C; ISOURCE = 5mA 5
Output Voltage Swing High VOH 650 mV 0°C < TA < 70°C; VS = 5V, ISOURCE = 20mA 5
Supply Current per Amplifier IS 4.2 mA 0°C < TA < 70°C; VS = 5V, 0V 5
Disabled Supply Current per Amplifier IS 1 µA 0°C < TA < 70°C; ENABLE = V+, 0.25V 5
ENABLE Pin Current IENABLE -85 µA 0°C < TA < 70°C; ENABLE = 0.3V 5
ENABLE Pin Input Voltage Low VL 0.3 V 0°C < TA < 70°C 5
Output Leakage Current 1 µA 0°C < TA < 70°C; ENABLE = V+, 0.25V, VO = 1.5V to 3.5V 5
Turn-On Time tON 300 ns 0°C < TA < 70°C; ENABLE = 5V to 0V, RL = 1k, VS = 5V 5
Turn-Off Time tOFF 65 µs 0°C < TA < 70°C; ENABLE = 0V to 5V, RL = 1k, VS = 5V 5
Slew Rate SR 35 V/µs 0°C < TA < 70°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V 5
Full-Power Bandwidth FPBW 3.7 MHz 0°C < TA < 70°C; VS = 5V, VOUT = 3VP-P 5
Large-Signal Gain AVOL 100 V/mV 0°C < TA < 70°C; VS = ±5V, VO = ±4.5V, RL = 10k 8
Common Mode Rejection Ratio CMRR 95 dB 0°C < TA < 70°C; VS = ±5V, VCM = -3V to 4V 8
Power Supply Rejection Ratio PSRR 85 dB 0°C < TA < 70°C; VS = ±1.5V to ±5V 8
Slew Rate SR 44 V/µs 0°C < TA < 70°C; VS = ±5V, AV = -1, RL = 1k, VO = -2V to 2V 8
Full-Power Bandwidth FPBW 4.66 MHz 0°C < TA < 70°C; VS = ±5V, VOUT = 3VP-P 8
Supply Current per Amplifier IS 4.6 mA 0°C < TA < 70°C; VS = ±5V 8
Gain-Bandwidth Product GBW 150 215 MHz TA = 25°C; VS = ±5V, Frequency = 1MHz 7
Input Current -40 40 mA Note 2 2
Junction Temperature TJMAX 150 °C 2
Storage Temperature Range -65 150 °C 2
Operating Temperature Range -40 85 °C Note 4 2
Thermal Resistance, Junction to Ambient (GN16 SSOP) θJA 135 °C/W GN package 2

CAD (KiCad official)

  • Symbol: LT6232CGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: lt6232cgn-etched.step / lt6232cgn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6232cgn.step / lt6232cgn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 62978a516663990d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF