3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6232CGN#PBF
Analog Devices · Pre-ordered Chips · SSOP-16-150mil
LT6232CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, rail-to-rail, swinging within 50mV of either supply with 30mA output current. |
| 2 | -IN A | input | Amplifier A inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 3 | +IN A | input | Amplifier A non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 4 | V+ | power_in | Positive supply, with total supply voltage V+ to V- from 3V minimum to 12.6V maximum. |
| 5 | +IN B | input | Amplifier B non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 6 | -IN B | input | Amplifier B inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 7 | OUT B | output | Amplifier B output, rail-to-rail, swinging within 50mV of either supply with 30mA output current. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | OUT C | output | Amplifier C output, rail-to-rail, swinging within 50mV of either supply with 30mA output current. |
| 11 | -IN C | input | Amplifier C inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 12 | +IN C | input | Amplifier C non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 13 | V- | power_in | Negative supply (ground in single-supply use), with total supply voltage V+ to V- from 3V minimum to 12.6V maximum. |
| 14 | +IN D | input | Amplifier D non-inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 15 | -IN D | input | Amplifier D inverting input; back-to-back diodes limit differential input to ±0.7V and input current must be limited to ±40mA. |
| 16 | OUT D | output | Amplifier D output, rail-to-rail, swinging within 50mV of either supply with 30mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (LT6232GN) | VOS | 50 | 350 | µV | TA = 25°C, VS = 5V, 0V | 3 | |
| Input Offset Voltage Match (Channel-to-Channel) | VOS | 100 | 600 | µV | TA = 25°C; Note 6 | 3 | |
| Input Bias Current | IB | 5 | 10 | µA | TA = 25°C | 3 | |
| Input Offset Current | IOS | 0.1 | 0.6 | µA | TA = 25°C | 3 | |
| Input Noise Voltage Density | en | 1.1 | 1.7 | nV/√Hz | f = 10kHz, VS = 5V | 3 | |
| Large-Signal Gain | AVOL | 105 | 200 | V/mV | TA = 25°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 3 | |
| Common Mode Rejection Ratio | CMRR | 90 | 115 | dB | TA = 25°C; VS = 5V, VCM = 1.5V to 4V | 3 | |
| Slew Rate | SR | 42 | 60 | V/µs | TA = 25°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 4 | |
| Full-Power Bandwidth | FPBW | 4.8 | 6.3 | MHz | TA = 25°C; VS = 5V, VOUT = 3VP-P | 4 | |
| Input Offset Voltage Drift | VOS TC | 0.5 | 3 | µV/°C | 0°C < TA < 70°C; VCM = Half Supply; not 100% tested | 5 | |
| Input Offset Voltage (LT6232CGN) | VOS | 450 | µV | 0°C < TA < 70°C | 5 | ||
| Input Offset Voltage Match (Channel-to-Channel) | VOS | 800 | µV | 0°C < TA < 70°C; Note 6 | 5 | ||
| Input Bias Current | IB | 11 | µA | 0°C < TA < 70°C | 5 | ||
| Input Offset Current | IOS | 0.7 | µA | 0°C < TA < 70°C | 5 | ||
| Large-Signal Gain | AVOL | 78 | V/mV | 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 10k to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 17 | V/mV | 0°C < TA < 70°C; VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2 | 5 | ||
| Large-Signal Gain | AVOL | 66 | V/mV | 0°C < TA < 70°C; VS = 3.3V, VO = 0.65V to 2.65V, RL = 10k to VS/2 | 5 | ||
| Common Mode Rejection Ratio | CMRR | 90 | dB | 0°C < TA < 70°C; VS = 5V, VCM = 1.5V to 4V | 5 | ||
| Common Mode Rejection Ratio | CMRR | 85 | dB | 0°C < TA < 70°C; VS = 3.3V, VCM = 1.15V to 2.65V | 5 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | 0°C < TA < 70°C; VS = 3V to 10V | 5 | ||
| Minimum Supply Voltage | 3 | V | 0°C < TA < 70°C; Note 7 | 5 | |||
| Output Voltage Swing Low (No Load) | VOL | 50 | mV | 0°C < TA < 70°C; No load | 5 | ||
| Output Voltage Swing Low | VOL | 200 | mV | 0°C < TA < 70°C; ISINK = 5mA | 5 | ||
| Output Voltage Swing Low | VOL | 500 | mV | 0°C < TA < 70°C; VS = 5V, ISINK = 20mA | 5 | ||
| Output Voltage Swing High (No Load) | VOH | 60 | mV | 0°C < TA < 70°C; No load | 5 | ||
| Output Voltage Swing High | VOH | 215 | mV | 0°C < TA < 70°C; ISOURCE = 5mA | 5 | ||
| Output Voltage Swing High | VOH | 650 | mV | 0°C < TA < 70°C; VS = 5V, ISOURCE = 20mA | 5 | ||
| Supply Current per Amplifier | IS | 4.2 | mA | 0°C < TA < 70°C; VS = 5V, 0V | 5 | ||
| Disabled Supply Current per Amplifier | IS | 1 | µA | 0°C < TA < 70°C; ENABLE = V+, 0.25V | 5 | ||
| ENABLE Pin Current | IENABLE | -85 | µA | 0°C < TA < 70°C; ENABLE = 0.3V | 5 | ||
| ENABLE Pin Input Voltage Low | VL | 0.3 | V | 0°C < TA < 70°C | 5 | ||
| Output Leakage Current | 1 | µA | 0°C < TA < 70°C; ENABLE = V+, 0.25V, VO = 1.5V to 3.5V | 5 | |||
| Turn-On Time | tON | 300 | ns | 0°C < TA < 70°C; ENABLE = 5V to 0V, RL = 1k, VS = 5V | 5 | ||
| Turn-Off Time | tOFF | 65 | µs | 0°C < TA < 70°C; ENABLE = 0V to 5V, RL = 1k, VS = 5V | 5 | ||
| Slew Rate | SR | 35 | V/µs | 0°C < TA < 70°C; VS = 5V, AV = -1, RL = 1k, VO = 1.5V to 3.5V | 5 | ||
| Full-Power Bandwidth | FPBW | 3.7 | MHz | 0°C < TA < 70°C; VS = 5V, VOUT = 3VP-P | 5 | ||
| Large-Signal Gain | AVOL | 100 | V/mV | 0°C < TA < 70°C; VS = ±5V, VO = ±4.5V, RL = 10k | 8 | ||
| Common Mode Rejection Ratio | CMRR | 95 | dB | 0°C < TA < 70°C; VS = ±5V, VCM = -3V to 4V | 8 | ||
| Power Supply Rejection Ratio | PSRR | 85 | dB | 0°C < TA < 70°C; VS = ±1.5V to ±5V | 8 | ||
| Slew Rate | SR | 44 | V/µs | 0°C < TA < 70°C; VS = ±5V, AV = -1, RL = 1k, VO = -2V to 2V | 8 | ||
| Full-Power Bandwidth | FPBW | 4.66 | MHz | 0°C < TA < 70°C; VS = ±5V, VOUT = 3VP-P | 8 | ||
| Supply Current per Amplifier | IS | 4.6 | mA | 0°C < TA < 70°C; VS = ±5V | 8 | ||
| Gain-Bandwidth Product | GBW | 150 | 215 | MHz | TA = 25°C; VS = ±5V, Frequency = 1MHz | 7 | |
| Input Current | -40 | 40 | mA | Note 2 | 2 | ||
| Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Thermal Resistance, Junction to Ambient (GN16 SSOP) | θJA | 135 | °C/W | GN package | 2 |
CAD (KiCad official)
- Symbol:
LT6232CGN#PBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
lt6232cgn-etched.step/lt6232cgn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6232cgn.step/lt6232cgn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
62978a516663990d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).