Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS92612DBVR

Texas Instruments · LED Drivers · SOT-23-5

TPS92612DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground pin of the device.
2 PWM input PWM input that enables the output current above VIH(PWM) (1.2 V typ) and disables it below VIL(PWM) (1.1 V typ), tolerating 0 to 40 V and used for brightness control (200 Hz to 2 kHz recommended).
3 SUPPLY power_in Device supply voltage input, 4.5 V to 40 V recommended operating range (45 V absolute maximum).
4 IN input Current input connected to the supply through external sense resistor R(SNS), with sense voltage range 4.4 V to 40 V.
5 OUT output Constant-current output set by R(SNS) (V(CS_REG) 98 mV typ) up to 150 mA, with 0 to 40 V driver output range and short-to-GND protection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Nixie Tube Driver/LED Driver
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage POR rising threshold V(POR_rising) 3.2 4 V V(SUPPLY) = 5 V to 40 V, TJ = -40°C to +150°C 4
Supply voltage POR falling threshold V(POR_falling) 2.2 3 V V(SUPPLY) = 5 V to 40 V, TJ = -40°C to +150°C 4
Device standby current I(Quiescent) 0.1 0.2 0.25 mA PWM = HIGH 4
Input logic-low voltage, PWM VIL(PWM) 1.045 1.1 1.155 V 4
Input logic-high voltage, PWM VIH(PWM) 1.16 1.2 1.24 V 4
Device output-current range I(OUT) 4 150 mA 100% duty cycle 4
Sense-resistor regulation voltage V(CS_REG) 94 98 102 mV TA = 25°C, V(SUPPLY) = 4.5 V to 18 V 4
Sense-resistor regulation voltage V(CS_REG) 93.5 98 102.5 mV TA = -40°C to +125°C, V(SUPPLY) = 4.5 V to 18 V 4
Sense-resistor value R(CS_REG) 0.66 24.5 Ω 4
Voltage dropout from SUPPLY to OUT V(DROPOUT) 120 150 mV V(CS_REG) voltage included, current setting of 10 mA 4
Voltage dropout from SUPPLY to OUT V(DROPOUT) 250 400 mV V(CS_REG) voltage included, current setting of 70 mA 4
Voltage dropout from SUPPLY to OUT V(DROPOUT) 430 700 mV V(CS_REG) voltage included, current setting of 150 mA 4
Output short-to-ground rising threshold V(SG_th_rising) 1.14 1.2 1.26 V 4
Output short-to-ground falling threshold V(SG_th_falling) 0.82 0.865 0.91 V 4
Output short-to-ground retry current I(Retry) 0.64 1.08 1.528 mA 4
Thermal shutdown junction temperature threshold T(TSD) 157 172 187 °C 4
Thermal shutdown junction temperature hysteresis T(TSD_HYS) 15 °C 4
PWM rising edge delay t(PWM_delay_rising) 10 17 25 µs 50% PWM voltage to 10% of output current closed loop, t2 - t1 4
PWM falling edge delay t(PWM_delay_falling) 15 21 30 µs 50% PWM voltage to 90% of output current open loop, t5 - t4 5
Device startup time t(DEVICE_STARTUP) 100 150 µs SUPPLY rising edge to 10% output current at 50-mA set current, t8 - t7 5
Output short-to-ground detection deglitch time t(SG_deg) 80 125 175 µs 5
Thermal over temperature deglitch timer t(TSD_deg) 50 µs 5
Fault recovery deglitch timer t(Recover_deg) 8.5 16 25 µs 5
High-voltage input IN, PWM, SUPPLY -0.3 45 V over operating ambient temperature range 3
High-voltage output OUT -0.3 45 V over operating ambient temperature range 3
IN to OUT V(IN), V(OUT) -0.3 45 V over operating ambient temperature range 3
SUPPLY to IN V(SUPPLY), V(IN) -0.3 1 V over operating ambient temperature range 3
Operating junction temperature TJ -40 150 °C over operating ambient temperature range 3
Storage temperature Tstg -40 150 °C 3
ESD HBM, all pins V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins 3
ESD CDM, all pins V(ESD) -500 500 V Charged-device model (CDM), per JESD22-C101, all pins 3
ESD CDM, corner pins V(ESD) -750 750 V CDM, corner pins (3, 4, and 5) 3
Device supply voltage SUPPLY 4.5 40 V 4
Sense voltage IN 4.4 40 V 4
PWM inputs PWM 0 40 V 4
Driver output OUT 0 40 V 4
Operating ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 200.7 °C/W DBV (SOT23), 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 104.4 °C/W DBV (SOT23), 5 pins 4
Junction-to-board thermal resistance RθJB 45.6 °C/W DBV (SOT23), 5 pins 4
Junction-to-top characterization parameter ψJT 17.5 °C/W DBV (SOT23), 5 pins 4
Junction-to-board characterization parameter ψJB 45.2 °C/W DBV (SOT23), 5 pins 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: TPS92612DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: tps92612dbvr-etched.step / tps92612dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps92612dbvr.step / tps92612dbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 5f8eb8a9a5b161b7, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF