Generated by kicad-footprint-generator · KiCad file format 20260206
TPS92612DBVR
Texas Instruments · LED Drivers · SOT-23-5
TPS92612DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin of the device. |
| 2 | PWM | input | PWM input that enables the output current above VIH(PWM) (1.2 V typ) and disables it below VIL(PWM) (1.1 V typ), tolerating 0 to 40 V and used for brightness control (200 Hz to 2 kHz recommended). |
| 3 | SUPPLY | power_in | Device supply voltage input, 4.5 V to 40 V recommended operating range (45 V absolute maximum). |
| 4 | IN | input | Current input connected to the supply through external sense resistor R(SNS), with sense voltage range 4.4 V to 40 V. |
| 5 | OUT | output | Constant-current output set by R(SNS) (V(CS_REG) 98 mV typ) up to 150 mA, with 0 to 40 V driver output range and short-to-GND protection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage POR rising threshold | V(POR_rising) | 3.2 | 4 | V | V(SUPPLY) = 5 V to 40 V, TJ = -40°C to +150°C | 4 | |
| Supply voltage POR falling threshold | V(POR_falling) | 2.2 | 3 | V | V(SUPPLY) = 5 V to 40 V, TJ = -40°C to +150°C | 4 | |
| Device standby current | I(Quiescent) | 0.1 | 0.2 | 0.25 | mA | PWM = HIGH | 4 |
| Input logic-low voltage, PWM | VIL(PWM) | 1.045 | 1.1 | 1.155 | V | 4 | |
| Input logic-high voltage, PWM | VIH(PWM) | 1.16 | 1.2 | 1.24 | V | 4 | |
| Device output-current range | I(OUT) | 4 | 150 | mA | 100% duty cycle | 4 | |
| Sense-resistor regulation voltage | V(CS_REG) | 94 | 98 | 102 | mV | TA = 25°C, V(SUPPLY) = 4.5 V to 18 V | 4 |
| Sense-resistor regulation voltage | V(CS_REG) | 93.5 | 98 | 102.5 | mV | TA = -40°C to +125°C, V(SUPPLY) = 4.5 V to 18 V | 4 |
| Sense-resistor value | R(CS_REG) | 0.66 | 24.5 | Ω | 4 | ||
| Voltage dropout from SUPPLY to OUT | V(DROPOUT) | 120 | 150 | mV | V(CS_REG) voltage included, current setting of 10 mA | 4 | |
| Voltage dropout from SUPPLY to OUT | V(DROPOUT) | 250 | 400 | mV | V(CS_REG) voltage included, current setting of 70 mA | 4 | |
| Voltage dropout from SUPPLY to OUT | V(DROPOUT) | 430 | 700 | mV | V(CS_REG) voltage included, current setting of 150 mA | 4 | |
| Output short-to-ground rising threshold | V(SG_th_rising) | 1.14 | 1.2 | 1.26 | V | 4 | |
| Output short-to-ground falling threshold | V(SG_th_falling) | 0.82 | 0.865 | 0.91 | V | 4 | |
| Output short-to-ground retry current | I(Retry) | 0.64 | 1.08 | 1.528 | mA | 4 | |
| Thermal shutdown junction temperature threshold | T(TSD) | 157 | 172 | 187 | °C | 4 | |
| Thermal shutdown junction temperature hysteresis | T(TSD_HYS) | 15 | °C | 4 | |||
| PWM rising edge delay | t(PWM_delay_rising) | 10 | 17 | 25 | µs | 50% PWM voltage to 10% of output current closed loop, t2 - t1 | 4 |
| PWM falling edge delay | t(PWM_delay_falling) | 15 | 21 | 30 | µs | 50% PWM voltage to 90% of output current open loop, t5 - t4 | 5 |
| Device startup time | t(DEVICE_STARTUP) | 100 | 150 | µs | SUPPLY rising edge to 10% output current at 50-mA set current, t8 - t7 | 5 | |
| Output short-to-ground detection deglitch time | t(SG_deg) | 80 | 125 | 175 | µs | 5 | |
| Thermal over temperature deglitch timer | t(TSD_deg) | 50 | µs | 5 | |||
| Fault recovery deglitch timer | t(Recover_deg) | 8.5 | 16 | 25 | µs | 5 | |
| High-voltage input IN, PWM, SUPPLY | -0.3 | 45 | V | over operating ambient temperature range | 3 | ||
| High-voltage output OUT | -0.3 | 45 | V | over operating ambient temperature range | 3 | ||
| IN to OUT | V(IN), V(OUT) | -0.3 | 45 | V | over operating ambient temperature range | 3 | |
| SUPPLY to IN | V(SUPPLY), V(IN) | -0.3 | 1 | V | over operating ambient temperature range | 3 | |
| Operating junction temperature | TJ | -40 | 150 | °C | over operating ambient temperature range | 3 | |
| Storage temperature | Tstg | -40 | 150 | °C | 3 | ||
| ESD HBM, all pins | V(ESD) | -2000 | 2000 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins | 3 | |
| ESD CDM, all pins | V(ESD) | -500 | 500 | V | Charged-device model (CDM), per JESD22-C101, all pins | 3 | |
| ESD CDM, corner pins | V(ESD) | -750 | 750 | V | CDM, corner pins (3, 4, and 5) | 3 | |
| Device supply voltage | SUPPLY | 4.5 | 40 | V | 4 | ||
| Sense voltage | IN | 4.4 | 40 | V | 4 | ||
| PWM inputs | PWM | 0 | 40 | V | 4 | ||
| Driver output | OUT | 0 | 40 | V | 4 | ||
| Operating ambient temperature | TA | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 200.7 | °C/W | DBV (SOT23), 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 104.4 | °C/W | DBV (SOT23), 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 45.6 | °C/W | DBV (SOT23), 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 17.5 | °C/W | DBV (SOT23), 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 45.2 | °C/W | DBV (SOT23), 5 pins | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TPS92612DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tps92612dbvr-etched.step/tps92612dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps92612dbvr.step/tps92612dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
5f8eb8a9a5b161b7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).