Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NB3L202KMNG

onsemi · Clock Buffers, Drivers · QFN-16-EP(3x3)

NB3L202KMNG from onsemi, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the device.
2 CLK_IN input Differential true clock input; accepts differential LVPECL, LVDS and HCSL, and single-ended LVPECL, HCSL, LVCMOS or LVTTL levels with a proper external Vth reference, operating up to 350 MHz.
3 CLK_IN# input Differential complementary clock input; receives the Vth reference when the device is driven single-ended.
4 VDD power_in Core power supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V).
5 GND_O power_in Ground for the outputs.
6 DIF_1# output 0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high.
7 DIF_1 output 0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high.
8 VDD_O power_in Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V).
9 GND power_in Ground reference for the device.
10 IREF input Precision reference resistor to GND sets the differential output current: 475 Ω 1% for a 100 Ω trace with 50 Ω termination, or 412 Ω 1% for an 85 Ω trace with 43 Ω termination.
11 OE0# input LVTTL/LVCMOS active-low output enable for DIF_0/DIF_0#: 0 enables the outputs and 1 disables them; internal pull-down.
12 OE1# input LVTTL/LVCMOS active-low output enable for DIF_1/DIF_1#: 0 enables the outputs and 1 disables them; internal pull-down.
13 VDD_O power_in Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V).
14 DIF_0 output 0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high.
15 DIF_0# output 0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high.
16 GND_O power_in Ground for the outputs.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer onsemi
Package QFN-16-EP(3x3)
Category Clock and Timing
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Core Supply Voltage VDD 4.6 V 4
I/O Supply Voltage VDD_O 4.6 V 4
Input High Voltage VIH 4.6 V Note 2: must not exceed maximum VDD 4
Input Low Voltage VIL -0.5 V 4
Maximum Output Current IOUT 24 mA 4
Operating Temperature Range TA -40 85 °C 4
Storage Temperature Range Tstg -65 150 °C 4
Thermal Resistance (Junction-to-Ambient) JA 42 °C/W 0 lfpm; Note 3 4
Thermal Resistance (Junction-to-Ambient) JA 35 °C/W 500 lfpm; Note 3 4
Thermal Resistance (Junction-to-Case) JC 4 °C/W Note 3 4
Wave Solder Tsol 265 °C 4
Core Power Supply Voltage VDD 2.97 3.3 3.63 V VDD = 3.3 V ±10% 5
Core Power Supply Voltage VDD 2.375 2.5 2.625 V VDD = 2.5 V ±5% 5
Output Power Supply Voltage VDD_O 2.97 3.3 3.63 V VDD_O = 3.3 V ±10% 5
Output Power Supply Voltage VDD_O 2.375 2.5 2.625 V VDD_O = 2.5 V ±5% 5
Total Power Supply Current IDD + IDD_O 80 110 mA all outputs active @ 350 MHz, RREF = 412, RL = 43 5
Standby Current Istdby 50 65 mA all OE pins de-asserted with inputs @ 350 MHz 5
Incremental output current for additional output lincr 15 23 mA One OE Enabled 5
Standby Current plus incremental current for one additional differential output Istdby + lincr 65 88 mA One OE Enabled @ 350 MHz 5
HCSL Output HIGH Voltage VOH 660 850 mV 5
HCSL Output LOW Voltage VOL -150 mV 5
HCSL Output Swing (Single-Ended) VOUT 400 800 mV 5
HCSL Output Swing (Differential) VOUT 750 1500 mV 5
Differential Input LOW Voltage VILD 0 V 5
Differential Input Voltage (VIHD - VILD) VID 0.25 1.3 V 5
Input Leakage Current IIL -5 5 µA 0 < VIN < VDD (Note 10) 5
LVTTL/LVCMOS Input HIGH Voltage (OEx#) VIH 2 V 5
LVTTL/LVCMOS Input LOW Voltage (OEx#) VIL -0.3 0.8 V 5
LVTTL/LVCMOS Input LOW Current (OEx#) IIL -10 10 µA VIN = GND 5
LVTTL/LVCMOS Input HIGH Current (OEx#) IIH 100 µA VIN = VDD 5
Maximum Input Frequency Fmax 350 MHz 6
Rise Time / Fall Time Trise/Tfall 175 500 700 ps Notes 13, 17 and 33; Figure 13 6
Output Slew Rate 0.5 2 V/ns Notes 13 and 17 6
Rise/Fall Time Variation Trise/Tfall 125 ps Notes 17 and 26 6
Slew Rate Matching 20 % Notes 18, 27 and 28 6
Voltage High Vhigh 660 700 850 mV Notes 17 and 20; Figure 14 6
Voltage Low Vlow -150 0 150 mV Notes 17 and 21; Figure 14 6
Input Slew Rate 0.35 V/ns Notes 29 and 32 6
Absolute Crossing Point Voltages Vcross absolute 250 550 mV Notes 12, 17 and 24 6
Total Variation of Vcross Over All Edges Total Vcross 140 mV Notes 17 and 25 6
Duty Cycle 45 55 % Note 18; Figure 15 6
Ringback Voltage Vrb 0.2 V Note 17; Figure 14 6
OE Latency Toe_lat 4 6 12 cycles Note 11 6
Input-to-Output Delay tpd 0.6 1 1.4 ns CLK_IN, DIF_[1:0] (Note 31) 6
Output-to-Output Skew across 2 outputs tSKEW 0 5 20 ps DIF_[1:0] (Notes 30 and 31) 6
Additive RMS Phase Jitter tJITTER 46 80 fs fcarrier = 156.25 MHz, 12 kHz − 20 MHz integrated range 6
Additive Phase Jitter, PCIe Gen 1 tjphPCIeG1 10 ps (p−p) Notes 35 and 36 8
Additive Phase Jitter, PCIe Gen 2 Lo Band tjphPCIeG2 0.3 ps (rms) 10 kHz < f < 1.5 MHz (Notes 35 and 38) 8
Additive Phase Jitter, PCIe Gen 2 High Band tjphPCIeG2 0.7 ps (rms) 1.5 MHz < f < Nyquist (50 MHz) (Notes 35 and 38) 8
Additive Phase Jitter, PCIe Gen 3 (PLL BW = 2-4 MHz or 2-5 MHz, CDR = 10 MHz) tjPCIeG3 0.07 0.4 ps Notes 35 and 38 8
Additive Phase Jitter, PCIe Gen 4 (PLL BW = 2-4 MHz or 2-5 MHz, CDR = 10 MHz) tjPCIeG4 0.07 0.4 ps Notes 35 and 38 8
Additive Phase Jitter, QPI & SMI (100.00 MHz or 133.33 MHz, 4.8 Gb/s, 6.4 Gb/s 12UI) tjphQPI_SMI 0.3 ps (rms) Notes 37 and 38 8
Additive Phase Jitter, QPI & SMI (100.00 MHz, 8.0 Gb/s, 12UI) tjphQPI_SMI 0.1 ps (rms) Notes 37 and 38 8
Additive Phase Jitter, QPI & SMI (100.00 MHz, 9.6 Gb/s, 12UI) tjphQPI_SMI 0.1 ps (rms) Notes 37 and 38 8

CAD (KiCad official)

  • Symbol: NB3L202KMNG
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: nb3l202kmng-etched.step / nb3l202kmng-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nb3l202kmng.step / nb3l202kmng.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 7f66f71b6e1e686b, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF