3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNB3L202KMNG
onsemi · Clock Buffers, Drivers · QFN-16-EP(3x3)
NB3L202KMNG from onsemi, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the device. |
| 2 | CLK_IN | input | Differential true clock input; accepts differential LVPECL, LVDS and HCSL, and single-ended LVPECL, HCSL, LVCMOS or LVTTL levels with a proper external Vth reference, operating up to 350 MHz. |
| 3 | CLK_IN# | input | Differential complementary clock input; receives the Vth reference when the device is driven single-ended. |
| 4 | VDD | power_in | Core power supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V). |
| 5 | GND_O | power_in | Ground for the outputs. |
| 6 | DIF_1# | output | 0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high. |
| 7 | DIF_1 | output | 0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE1# is high. |
| 8 | VDD_O | power_in | Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V). |
| 9 | GND | power_in | Ground reference for the device. |
| 10 | IREF | input | Precision reference resistor to GND sets the differential output current: 475 Ω 1% for a 100 Ω trace with 50 Ω termination, or 412 Ω 1% for an 85 Ω trace with 43 Ω termination. |
| 11 | OE0# | input | LVTTL/LVCMOS active-low output enable for DIF_0/DIF_0#: 0 enables the outputs and 1 disables them; internal pull-down. |
| 12 | OE1# | input | LVTTL/LVCMOS active-low output enable for DIF_1/DIF_1#: 0 enables the outputs and 1 disables them; internal pull-down. |
| 13 | VDD_O | power_in | Output supply: 3.3 V ±10% (2.970 V to 3.630 V) or 2.5 V ±5% (2.375 V to 2.625 V). |
| 14 | DIF_0 | output | 0.7 V differential HCSL true output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high. |
| 15 | DIF_0# | output | 0.7 V differential HCSL complementary output; output current is set by the IREF resistor and the output is tri-stated (pulled low by termination) when OE0# is high. |
| 16 | GND_O | power_in | Ground for the outputs. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | QFN-16-EP(3x3) |
| Category | Clock and Timing |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Core Supply Voltage | VDD | 4.6 | V | 4 | |||
| I/O Supply Voltage | VDD_O | 4.6 | V | 4 | |||
| Input High Voltage | VIH | 4.6 | V | Note 2: must not exceed maximum VDD | 4 | ||
| Input Low Voltage | VIL | -0.5 | V | 4 | |||
| Maximum Output Current | IOUT | 24 | mA | 4 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 4 | ||
| Thermal Resistance (Junction-to-Ambient) | JA | 42 | °C/W | 0 lfpm; Note 3 | 4 | ||
| Thermal Resistance (Junction-to-Ambient) | JA | 35 | °C/W | 500 lfpm; Note 3 | 4 | ||
| Thermal Resistance (Junction-to-Case) | JC | 4 | °C/W | Note 3 | 4 | ||
| Wave Solder | Tsol | 265 | °C | 4 | |||
| Core Power Supply Voltage | VDD | 2.97 | 3.3 | 3.63 | V | VDD = 3.3 V ±10% | 5 |
| Core Power Supply Voltage | VDD | 2.375 | 2.5 | 2.625 | V | VDD = 2.5 V ±5% | 5 |
| Output Power Supply Voltage | VDD_O | 2.97 | 3.3 | 3.63 | V | VDD_O = 3.3 V ±10% | 5 |
| Output Power Supply Voltage | VDD_O | 2.375 | 2.5 | 2.625 | V | VDD_O = 2.5 V ±5% | 5 |
| Total Power Supply Current | IDD + IDD_O | 80 | 110 | mA | all outputs active @ 350 MHz, RREF = 412, RL = 43 | 5 | |
| Standby Current | Istdby | 50 | 65 | mA | all OE pins de-asserted with inputs @ 350 MHz | 5 | |
| Incremental output current for additional output | lincr | 15 | 23 | mA | One OE Enabled | 5 | |
| Standby Current plus incremental current for one additional differential output | Istdby + lincr | 65 | 88 | mA | One OE Enabled @ 350 MHz | 5 | |
| HCSL Output HIGH Voltage | VOH | 660 | 850 | mV | 5 | ||
| HCSL Output LOW Voltage | VOL | -150 | mV | 5 | |||
| HCSL Output Swing (Single-Ended) | VOUT | 400 | 800 | mV | 5 | ||
| HCSL Output Swing (Differential) | VOUT | 750 | 1500 | mV | 5 | ||
| Differential Input LOW Voltage | VILD | 0 | V | 5 | |||
| Differential Input Voltage (VIHD - VILD) | VID | 0.25 | 1.3 | V | 5 | ||
| Input Leakage Current | IIL | -5 | 5 | µA | 0 < VIN < VDD (Note 10) | 5 | |
| LVTTL/LVCMOS Input HIGH Voltage (OEx#) | VIH | 2 | V | 5 | |||
| LVTTL/LVCMOS Input LOW Voltage (OEx#) | VIL | -0.3 | 0.8 | V | 5 | ||
| LVTTL/LVCMOS Input LOW Current (OEx#) | IIL | -10 | 10 | µA | VIN = GND | 5 | |
| LVTTL/LVCMOS Input HIGH Current (OEx#) | IIH | 100 | µA | VIN = VDD | 5 | ||
| Maximum Input Frequency | Fmax | 350 | MHz | 6 | |||
| Rise Time / Fall Time | Trise/Tfall | 175 | 500 | 700 | ps | Notes 13, 17 and 33; Figure 13 | 6 |
| Output Slew Rate | 0.5 | 2 | V/ns | Notes 13 and 17 | 6 | ||
| Rise/Fall Time Variation | Trise/Tfall | 125 | ps | Notes 17 and 26 | 6 | ||
| Slew Rate Matching | 20 | % | Notes 18, 27 and 28 | 6 | |||
| Voltage High | Vhigh | 660 | 700 | 850 | mV | Notes 17 and 20; Figure 14 | 6 |
| Voltage Low | Vlow | -150 | 0 | 150 | mV | Notes 17 and 21; Figure 14 | 6 |
| Input Slew Rate | 0.35 | V/ns | Notes 29 and 32 | 6 | |||
| Absolute Crossing Point Voltages | Vcross absolute | 250 | 550 | mV | Notes 12, 17 and 24 | 6 | |
| Total Variation of Vcross Over All Edges | Total Vcross | 140 | mV | Notes 17 and 25 | 6 | ||
| Duty Cycle | 45 | 55 | % | Note 18; Figure 15 | 6 | ||
| Ringback Voltage | Vrb | 0.2 | V | Note 17; Figure 14 | 6 | ||
| OE Latency | Toe_lat | 4 | 6 | 12 | cycles | Note 11 | 6 |
| Input-to-Output Delay | tpd | 0.6 | 1 | 1.4 | ns | CLK_IN, DIF_[1:0] (Note 31) | 6 |
| Output-to-Output Skew across 2 outputs | tSKEW | 0 | 5 | 20 | ps | DIF_[1:0] (Notes 30 and 31) | 6 |
| Additive RMS Phase Jitter | tJITTER | 46 | 80 | fs | fcarrier = 156.25 MHz, 12 kHz − 20 MHz integrated range | 6 | |
| Additive Phase Jitter, PCIe Gen 1 | tjphPCIeG1 | 10 | ps (p−p) | Notes 35 and 36 | 8 | ||
| Additive Phase Jitter, PCIe Gen 2 Lo Band | tjphPCIeG2 | 0.3 | ps (rms) | 10 kHz < f < 1.5 MHz (Notes 35 and 38) | 8 | ||
| Additive Phase Jitter, PCIe Gen 2 High Band | tjphPCIeG2 | 0.7 | ps (rms) | 1.5 MHz < f < Nyquist (50 MHz) (Notes 35 and 38) | 8 | ||
| Additive Phase Jitter, PCIe Gen 3 (PLL BW = 2-4 MHz or 2-5 MHz, CDR = 10 MHz) | tjPCIeG3 | 0.07 | 0.4 | ps | Notes 35 and 38 | 8 | |
| Additive Phase Jitter, PCIe Gen 4 (PLL BW = 2-4 MHz or 2-5 MHz, CDR = 10 MHz) | tjPCIeG4 | 0.07 | 0.4 | ps | Notes 35 and 38 | 8 | |
| Additive Phase Jitter, QPI & SMI (100.00 MHz or 133.33 MHz, 4.8 Gb/s, 6.4 Gb/s 12UI) | tjphQPI_SMI | 0.3 | ps (rms) | Notes 37 and 38 | 8 | ||
| Additive Phase Jitter, QPI & SMI (100.00 MHz, 8.0 Gb/s, 12UI) | tjphQPI_SMI | 0.1 | ps (rms) | Notes 37 and 38 | 8 | ||
| Additive Phase Jitter, QPI & SMI (100.00 MHz, 9.6 Gb/s, 12UI) | tjphQPI_SMI | 0.1 | ps (rms) | Notes 37 and 38 | 8 |
CAD (KiCad official)
- Symbol:
NB3L202KMNG - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
nb3l202kmng-etched.step/nb3l202kmng-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nb3l202kmng.step/nb3l202kmng.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
7f66f71b6e1e686b, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).