Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74LVC374ADWR

Texas Instruments · Flip Flops · SOIC-20-300mil

SN74LVC374ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE input Buffered output-enable; when high, all eight outputs go to high impedance, and it should be tied to VCC through a pullup resistor so the outputs stay high-impedance during power up and power down.
2 1Q output Output 1 takes the logic level of 1D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
3 1D input Data input 1 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
4 2D input Data input 2 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
5 2Q output Output 2 takes the logic level of 2D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
6 3Q output Output 3 takes the logic level of 3D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
7 3D input Data input 3 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
8 4D input Data input 4 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
9 4Q output Output 4 takes the logic level of 4D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
10 GND power_in Ground pin.
11 CLK input Clock input; the Q outputs are set to the D input levels on its positive transition.
12 5Q output Output 5 takes the logic level of 5D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
13 5D input Data input 5 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
14 6D input Data input 6 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
15 6Q output Output 6 takes the logic level of 6D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
16 7Q output Output 7 takes the logic level of 7D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
17 7D input Data input 7 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
18 8D input Data input 8 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V.
19 8Q output Output 8 takes the logic level of 8D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output.
20 VCC power_in Supply pin; the device operates from 1.65 V to 3.6 V, and a 0.1-µF bypass capacitor is recommended as close to the pin as possible.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VCC -0.5 6.5 V 4
Input voltage range VI -0.5 6.5 V 4
Voltage applied to output in high-impedance or power-off state VO -0.5 6.5 V high-impedance or power-off state 4
Voltage applied to output in high or low state VO -0.5 V high or low state; max printed as VCC + 0.5 V 4
Input clamp current IIK -50 mA VI < 0 4
Output clamp current IOK -50 mA VO < 0 4
Continuous output current IO -50 50 mA 4
Continuous current through VCC or GND -100 100 mA 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage, operating VCC 1.65 3.6 V SN74LVC374A column 5
Supply voltage, data retention only VCC 1.5 V data retention only 5
High-level input voltage VIH 1.7 V VCC = 2.3 V to 2.7 V 5
High-level input voltage VIH 2 V VCC = 2.7 V to 3.6 V 5
Low-level input voltage VIL 0.7 V VCC = 2.3 V to 2.7 V 5
Low-level input voltage VIL 0.8 V VCC = 2.7 V to 3.6 V 5
Input voltage VI 0 5.5 V 5
Output voltage, high or low state VO 0 V high or low state; max printed as VCC 5
Output voltage, 3-state VO 0 5.5 V 3-state 5
High-level output current IOH -4 mA VCC = 1.65 V 5
High-level output current IOH -8 mA VCC = 2.3 V 5
High-level output current IOH -12 mA VCC = 2.7 V 5
High-level output current IOH -24 mA VCC = 3 V 5
Low-level output current IOL 4 mA VCC = 1.65 V 5
Low-level output current IOL 8 mA VCC = 2.3 V 5
Low-level output current IOL 12 mA VCC = 2.7 V 5
Low-level output current IOL 24 mA VCC = 3 V 5
Input transition rise or fall rate Δt/Δv 10 ns/V 5
Operating free-air temperature TA -40 125 °C SN74LVC374A column as printed 5
High-level output voltage VOH 1.2 V IOH = -4 mA; VCC = 1.65 V; -40°C to 85°C 6
High-level output voltage VOH 1.7 V IOH = -8 mA; VCC = 2.3 V; -40°C to 85°C 6
High-level output voltage VOH 2.2 V IOH = -12 mA; VCC = 2.7 V; -40°C to 85°C 6
High-level output voltage VOH 2.4 V IOH = -24 mA; VCC = 3 V; -40°C to 85°C 6
Low-level output voltage VOL 0.2 V IOL = 100 µA; VCC = 1.65 V to 3.6 V; -40°C to 85°C 6
Low-level output voltage VOL 0.45 V IOL = 4 mA; VCC = 1.65 V; -40°C to 85°C 6
Low-level output voltage VOL 0.7 V IOL = 8 mA; VCC = 2.3 V; -40°C to 85°C 6
Low-level output voltage VOL 0.4 V IOL = 12 mA; VCC = 2.7 V; -40°C to 85°C 6
Low-level output voltage VOL 0.55 V IOL = 24 mA; VCC = 3 V; -40°C to 85°C 6
Input leakage current II -5 5 µA VI = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C 6
Power-off leakage current Ioff -10 10 µA VCC = 0; VI or VO = 5.5 V; -40°C to 85°C 6
3-state output off-state current IOZ -10 10 µA VO = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C 6
Quiescent supply current ICC 10 µA VI = VCC or GND; IO = 0; VCC = 3.6 V; -40°C to 85°C 6
Quiescent supply current, input above VCC ICC 10 µA 3.6 V ≤ VI ≤ 5.5 V; disabled state only; -40°C to 85°C 6
Additional quiescent supply current per input at VCC - 0.6 V ΔICC 500 µA One input at VCC - 0.6 V, others at VCC or GND; VCC = 2.7 V to 3.6 V; -40°C to 85°C 6
Clock frequency, minimum fmax at VCC 1.8 V fmax 55 MHz VCC = 1.8 V ± 0.15 V; -40°C to 85°C 8
Clock frequency, minimum fmax at VCC 2.5 V fmax 95 MHz VCC = 2.5 V ± 0.2 V; -40°C to 85°C 8
Clock frequency, minimum fmax at VCC 2.7 V fmax 80 MHz VCC = 2.7 V; -40°C to 85°C 8
Clock frequency, minimum fmax at VCC 3.3 V fmax 100 MHz VCC = 3.3 V ± 0.3 V; -40°C to 85°C 8
Propagation delay CLK to Q tpd 21.9 ns VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 8
Propagation delay CLK to Q tpd 10.8 ns VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 8
Propagation delay CLK to Q tpd 8.1 ns VCC = 2.7 V; -40°C to 85°C; see Figure 3 8
Propagation delay CLK to Q tpd 1.5 7 ns VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 8
Enable time OE to Q ten 19.8 ns VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 8
Enable time OE to Q ten 10.8 ns VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 8
Enable time OE to Q ten 8.5 ns VCC = 2.7 V; -40°C to 85°C; see Figure 3 8
Enable time OE to Q ten 1.5 7.5 ns VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 8
Disable time OE to Q tdis 19.1 ns VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 8
Disable time OE to Q tdis 18.1 ns VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 8
Disable time OE to Q tdis 7.1 ns VCC = 2.7 V; -40°C to 85°C; see Figure 3 8
Disable time OE to Q tdis 1.5 6.5 ns VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 8

CAD (KiCad official)

  • Symbol: SN74LVC374ADWR
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74lvc374adwr-etched.step / sn74lvc374adwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74lvc374adwr.step / sn74lvc374adwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 78071ef9888538ba, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF