Generated by kicad-footprint-generator · KiCad file format 20260206
SN74LVC374ADWR
Texas Instruments · Flip Flops · SOIC-20-300mil
SN74LVC374ADWR from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE | input | Buffered output-enable; when high, all eight outputs go to high impedance, and it should be tied to VCC through a pullup resistor so the outputs stay high-impedance during power up and power down. |
| 2 | 1Q | output | Output 1 takes the logic level of 1D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 3 | 1D | input | Data input 1 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 4 | 2D | input | Data input 2 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 5 | 2Q | output | Output 2 takes the logic level of 2D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 6 | 3Q | output | Output 3 takes the logic level of 3D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 7 | 3D | input | Data input 3 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 8 | 4D | input | Data input 4 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 9 | 4Q | output | Output 4 takes the logic level of 4D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 10 | GND | power_in | Ground pin. |
| 11 | CLK | input | Clock input; the Q outputs are set to the D input levels on its positive transition. |
| 12 | 5Q | output | Output 5 takes the logic level of 5D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 13 | 5D | input | Data input 5 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 14 | 6D | input | Data input 6 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 15 | 6Q | output | Output 6 takes the logic level of 6D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 16 | 7Q | output | Output 7 takes the logic level of 7D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 17 | 7D | input | Data input 7 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 18 | 8D | input | Data input 8 is latched on the positive transition of CLK, and inputs accept voltages up to 5.5 V. |
| 19 | 8Q | output | Output 8 takes the logic level of 8D on the positive CLK transition and is high impedance when OE is high; load current should not exceed 25 mA per output. |
| 20 | VCC | power_in | Supply pin; the device operates from 1.65 V to 3.6 V, and a 0.1-µF bypass capacitor is recommended as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VCC | -0.5 | 6.5 | V | 4 | ||
| Input voltage range | VI | -0.5 | 6.5 | V | 4 | ||
| Voltage applied to output in high-impedance or power-off state | VO | -0.5 | 6.5 | V | high-impedance or power-off state | 4 | |
| Voltage applied to output in high or low state | VO | -0.5 | V | high or low state; max printed as VCC + 0.5 V | 4 | ||
| Input clamp current | IIK | -50 | mA | VI < 0 | 4 | ||
| Output clamp current | IOK | -50 | mA | VO < 0 | 4 | ||
| Continuous output current | IO | -50 | 50 | mA | 4 | ||
| Continuous current through VCC or GND | -100 | 100 | mA | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, operating | VCC | 1.65 | 3.6 | V | SN74LVC374A column | 5 | |
| Supply voltage, data retention only | VCC | 1.5 | V | data retention only | 5 | ||
| High-level input voltage | VIH | 1.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| High-level input voltage | VIH | 2 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| Low-level input voltage | VIL | 0.7 | V | VCC = 2.3 V to 2.7 V | 5 | ||
| Low-level input voltage | VIL | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 | ||
| Input voltage | VI | 0 | 5.5 | V | 5 | ||
| Output voltage, high or low state | VO | 0 | V | high or low state; max printed as VCC | 5 | ||
| Output voltage, 3-state | VO | 0 | 5.5 | V | 3-state | 5 | |
| High-level output current | IOH | -4 | mA | VCC = 1.65 V | 5 | ||
| High-level output current | IOH | -8 | mA | VCC = 2.3 V | 5 | ||
| High-level output current | IOH | -12 | mA | VCC = 2.7 V | 5 | ||
| High-level output current | IOH | -24 | mA | VCC = 3 V | 5 | ||
| Low-level output current | IOL | 4 | mA | VCC = 1.65 V | 5 | ||
| Low-level output current | IOL | 8 | mA | VCC = 2.3 V | 5 | ||
| Low-level output current | IOL | 12 | mA | VCC = 2.7 V | 5 | ||
| Low-level output current | IOL | 24 | mA | VCC = 3 V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 10 | ns/V | 5 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | SN74LVC374A column as printed | 5 | |
| High-level output voltage | VOH | 1.2 | V | IOH = -4 mA; VCC = 1.65 V; -40°C to 85°C | 6 | ||
| High-level output voltage | VOH | 1.7 | V | IOH = -8 mA; VCC = 2.3 V; -40°C to 85°C | 6 | ||
| High-level output voltage | VOH | 2.2 | V | IOH = -12 mA; VCC = 2.7 V; -40°C to 85°C | 6 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -24 mA; VCC = 3 V; -40°C to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA; VCC = 1.65 V to 3.6 V; -40°C to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.45 | V | IOL = 4 mA; VCC = 1.65 V; -40°C to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.7 | V | IOL = 8 mA; VCC = 2.3 V; -40°C to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 12 mA; VCC = 2.7 V; -40°C to 85°C | 6 | ||
| Low-level output voltage | VOL | 0.55 | V | IOL = 24 mA; VCC = 3 V; -40°C to 85°C | 6 | ||
| Input leakage current | II | -5 | 5 | µA | VI = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C | 6 | |
| Power-off leakage current | Ioff | -10 | 10 | µA | VCC = 0; VI or VO = 5.5 V; -40°C to 85°C | 6 | |
| 3-state output off-state current | IOZ | -10 | 10 | µA | VO = 0 to 5.5 V; VCC = 3.6 V; -40°C to 85°C | 6 | |
| Quiescent supply current | ICC | 10 | µA | VI = VCC or GND; IO = 0; VCC = 3.6 V; -40°C to 85°C | 6 | ||
| Quiescent supply current, input above VCC | ICC | 10 | µA | 3.6 V ≤ VI ≤ 5.5 V; disabled state only; -40°C to 85°C | 6 | ||
| Additional quiescent supply current per input at VCC - 0.6 V | ΔICC | 500 | µA | One input at VCC - 0.6 V, others at VCC or GND; VCC = 2.7 V to 3.6 V; -40°C to 85°C | 6 | ||
| Clock frequency, minimum fmax at VCC 1.8 V | fmax | 55 | MHz | VCC = 1.8 V ± 0.15 V; -40°C to 85°C | 8 | ||
| Clock frequency, minimum fmax at VCC 2.5 V | fmax | 95 | MHz | VCC = 2.5 V ± 0.2 V; -40°C to 85°C | 8 | ||
| Clock frequency, minimum fmax at VCC 2.7 V | fmax | 80 | MHz | VCC = 2.7 V; -40°C to 85°C | 8 | ||
| Clock frequency, minimum fmax at VCC 3.3 V | fmax | 100 | MHz | VCC = 3.3 V ± 0.3 V; -40°C to 85°C | 8 | ||
| Propagation delay CLK to Q | tpd | 21.9 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Propagation delay CLK to Q | tpd | 10.8 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Propagation delay CLK to Q | tpd | 8.1 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Propagation delay CLK to Q | tpd | 1.5 | 7 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 | |
| Enable time OE to Q | ten | 19.8 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Enable time OE to Q | ten | 10.8 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Enable time OE to Q | ten | 8.5 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Enable time OE to Q | ten | 1.5 | 7.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 | |
| Disable time OE to Q | tdis | 19.1 | ns | VCC = 1.8 V ± 0.15 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Disable time OE to Q | tdis | 18.1 | ns | VCC = 2.5 V ± 0.2 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Disable time OE to Q | tdis | 7.1 | ns | VCC = 2.7 V; -40°C to 85°C; see Figure 3 | 8 | ||
| Disable time OE to Q | tdis | 1.5 | 6.5 | ns | VCC = 3.3 V ± 0.3 V; -40°C to 85°C; see Figure 3 | 8 |
CAD (KiCad official)
- Symbol:
SN74LVC374ADWR - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74lvc374adwr-etched.step/sn74lvc374adwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74lvc374adwr.step/sn74lvc374adwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (37 pp, sha256
78071ef9888538ba, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).