Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC3487NSR

Texas Instruments · RS-485/RS-422 ICs · SO-16-208mil

MC3487NSR from Texas Instruments, in a SO-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1A input Single-ended TTL-compatible data input for driver channel 1.
2 1Y output Non-inverting output of the differential driver on channel 1.
3 1Z output Inverting output of the differential driver on channel 1.
4 1,2EN input Enable input for channels 1 and 2; the outputs go high-impedance when it is at a low logic level.
5 2Z output Inverting output of the differential driver on channel 2.
6 2Y output Non-inverting output of the differential driver on channel 2.
7 2A input Single-ended TTL-compatible data input for driver channel 2.
8 GND power_in Device ground.
9 3A input Single-ended TTL-compatible data input for driver channel 3.
10 3Y output Non-inverting output of the differential driver on channel 3.
11 3Z output Inverting output of the differential driver on channel 3.
12 3,4EN input Enable input for channels 3 and 4; the outputs go high-impedance when it is at a low logic level.
13 4Z output Inverting output of the differential driver on channel 4.
14 4Y output Non-inverting output of the differential driver on channel 4.
15 4A input Single-ended TTL-compatible data input for driver channel 4.
16 VCC power_in 5V power supply positive terminal; the recommended supply range is 4.75 V to 5.25 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-16-208mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 4
Input voltage VI 5.5 V 4
Output voltage VO 7 V 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VCC 4.75 5 5.25 V 4
High-level input voltage VIH 2 V 4
Low-level input voltage VIL 0.8 V 4
Operating free-air temperature TA 0 70 °C 4
Junction-to-ambient thermal resistance RθJA 88.5 °C/W NS (SOP) package, 16 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 46.2 °C/W NS (SOP) package, 16 pins 4
Junction-to-board thermal resistance RθJB 50.7 °C/W NS (SOP) package, 16 pins 4
Junction-to-top characterization parameter ψJT 13.5 °C/W NS (SOP) package, 16 pins 4
Junction-to-board characterization parameter ψJB 50.3 °C/W NS (SOP) package, 16 pins 4
Input clamp voltage VIK -1.5 V II = -18 mA 5
High-level output voltage VOH 2.5 V VIL = 0.8 V, VIH = 2 V, IOH = -20 mA 5
Low-level output voltage VOL 0.5 V VIL = 0.8 V, VIH = 2 V, IOL = 48 mA 5
Differential output voltage /VOD/ 2 V RL = 100 Ω, See Figure 6-1 5
Change in magnitude of differential output voltage Δ/VOD/ -0.4 0.4 V RL = 100 Ω, See Figure 6-1 5
Common-mode output voltage VOC 3 V RL = 100 Ω, See Figure 6-1 5
Change in magnitude of common-mode output voltage Δ/VOC/ -0.4 0.4 V RL = 100 Ω, See Figure 6-1 5
Output current with power off IO 100 μA VCC = 0, VO = 6 V 5
Output current with power off IO -100 μA VCC = 0, VO = -0.25 V 5
High-impedance-state output current IOZ 100 μA Output enables at 0.8 V, VO = 2.7 V 5
High-impedance-state output current IOZ -100 μA Output enables at 0.8 V, VO = 0.5 V 5
Input current at maximum input voltage II 100 μA VI = 5.5 V 5
High-level input current IIH 50 μA VI = 2.7 V 5
Low-level input current IIL -400 μA VI = 0.5 V 5
Short-circuit output current IOS -140 -40 mA VI = 2 V 5
Supply current (all drivers) ICC 105 mA Outputs disabled 5
Supply current (all drivers) ICC 85 mA Outputs enabled, No load 5
Propagation delay time, low- to high-level output tPLH 20 ns CL = 15 pF, See Figure 6-2 5
Propagation delay time, high- to low-level output tPHL 20 ns CL = 15 pF, See Figure 6-2 5
Skew time tsk 6 ns CL = 15 pF, See Figure 6-2 5
Differential-output transition time tt(OD) 20 ns CL = 15 pF, See Figure 6-3 5
Output enable time to high level tPZH 30 ns CL = 50 pF, See Figure 6-4 5
Output enable time to low level tPZL 30 ns CL = 50 pF, See Figure 6-4 5
Output disable time from high level tPHZ 25 ns CL = 50 pF, See Figure 6-4 5
Output disable time from low level tPLZ 30 ns CL = 50 pF, See Figure 6-4 5

CAD (KiCad official)

  • Symbol: MC3487NSR
  • Footprint: Package_SO:SO-16_5.3x10.2mm_P1.27mm
  • 3D model: SO-16-208mil (KiCad packages3D, STEP)
  • 3D model files: mc3487nsr-etched.step / mc3487nsr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc3487nsr.step / mc3487nsr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (20 pp, sha256 004525dd2286938d, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF