Generated by kicad-footprint-generator · KiCad file format 20260206
MC3487NSR
Texas Instruments · RS-485/RS-422 ICs · SO-16-208mil
MC3487NSR from Texas Instruments, in a SO-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Single-ended TTL-compatible data input for driver channel 1. |
| 2 | 1Y | output | Non-inverting output of the differential driver on channel 1. |
| 3 | 1Z | output | Inverting output of the differential driver on channel 1. |
| 4 | 1,2EN | input | Enable input for channels 1 and 2; the outputs go high-impedance when it is at a low logic level. |
| 5 | 2Z | output | Inverting output of the differential driver on channel 2. |
| 6 | 2Y | output | Non-inverting output of the differential driver on channel 2. |
| 7 | 2A | input | Single-ended TTL-compatible data input for driver channel 2. |
| 8 | GND | power_in | Device ground. |
| 9 | 3A | input | Single-ended TTL-compatible data input for driver channel 3. |
| 10 | 3Y | output | Non-inverting output of the differential driver on channel 3. |
| 11 | 3Z | output | Inverting output of the differential driver on channel 3. |
| 12 | 3,4EN | input | Enable input for channels 3 and 4; the outputs go high-impedance when it is at a low logic level. |
| 13 | 4Z | output | Inverting output of the differential driver on channel 4. |
| 14 | 4Y | output | Non-inverting output of the differential driver on channel 4. |
| 15 | 4A | input | Single-ended TTL-compatible data input for driver channel 4. |
| 16 | VCC | power_in | 5V power supply positive terminal; the recommended supply range is 4.75 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-16-208mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 7 | V | 4 | |||
| Input voltage | VI | 5.5 | V | 4 | |||
| Output voltage | VO | 7 | V | 4 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 4.75 | 5 | 5.25 | V | 4 | |
| High-level input voltage | VIH | 2 | V | 4 | |||
| Low-level input voltage | VIL | 0.8 | V | 4 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 88.5 | °C/W | NS (SOP) package, 16 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 46.2 | °C/W | NS (SOP) package, 16 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 50.7 | °C/W | NS (SOP) package, 16 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 13.5 | °C/W | NS (SOP) package, 16 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 50.3 | °C/W | NS (SOP) package, 16 pins | 4 | ||
| Input clamp voltage | VIK | -1.5 | V | II = -18 mA | 5 | ||
| High-level output voltage | VOH | 2.5 | V | VIL = 0.8 V, VIH = 2 V, IOH = -20 mA | 5 | ||
| Low-level output voltage | VOL | 0.5 | V | VIL = 0.8 V, VIH = 2 V, IOL = 48 mA | 5 | ||
| Differential output voltage | /VOD/ | 2 | V | RL = 100 Ω, See Figure 6-1 | 5 | ||
| Change in magnitude of differential output voltage | Δ/VOD/ | -0.4 | 0.4 | V | RL = 100 Ω, See Figure 6-1 | 5 | |
| Common-mode output voltage | VOC | 3 | V | RL = 100 Ω, See Figure 6-1 | 5 | ||
| Change in magnitude of common-mode output voltage | Δ/VOC/ | -0.4 | 0.4 | V | RL = 100 Ω, See Figure 6-1 | 5 | |
| Output current with power off | IO | 100 | μA | VCC = 0, VO = 6 V | 5 | ||
| Output current with power off | IO | -100 | μA | VCC = 0, VO = -0.25 V | 5 | ||
| High-impedance-state output current | IOZ | 100 | μA | Output enables at 0.8 V, VO = 2.7 V | 5 | ||
| High-impedance-state output current | IOZ | -100 | μA | Output enables at 0.8 V, VO = 0.5 V | 5 | ||
| Input current at maximum input voltage | II | 100 | μA | VI = 5.5 V | 5 | ||
| High-level input current | IIH | 50 | μA | VI = 2.7 V | 5 | ||
| Low-level input current | IIL | -400 | μA | VI = 0.5 V | 5 | ||
| Short-circuit output current | IOS | -140 | -40 | mA | VI = 2 V | 5 | |
| Supply current (all drivers) | ICC | 105 | mA | Outputs disabled | 5 | ||
| Supply current (all drivers) | ICC | 85 | mA | Outputs enabled, No load | 5 | ||
| Propagation delay time, low- to high-level output | tPLH | 20 | ns | CL = 15 pF, See Figure 6-2 | 5 | ||
| Propagation delay time, high- to low-level output | tPHL | 20 | ns | CL = 15 pF, See Figure 6-2 | 5 | ||
| Skew time | tsk | 6 | ns | CL = 15 pF, See Figure 6-2 | 5 | ||
| Differential-output transition time | tt(OD) | 20 | ns | CL = 15 pF, See Figure 6-3 | 5 | ||
| Output enable time to high level | tPZH | 30 | ns | CL = 50 pF, See Figure 6-4 | 5 | ||
| Output enable time to low level | tPZL | 30 | ns | CL = 50 pF, See Figure 6-4 | 5 | ||
| Output disable time from high level | tPHZ | 25 | ns | CL = 50 pF, See Figure 6-4 | 5 | ||
| Output disable time from low level | tPLZ | 30 | ns | CL = 50 pF, See Figure 6-4 | 5 |
CAD (KiCad official)
- Symbol:
MC3487NSR - Footprint:
Package_SO:SO-16_5.3x10.2mm_P1.27mm - 3D model: SO-16-208mil (KiCad packages3D, STEP)
- 3D model files:
mc3487nsr-etched.step/mc3487nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc3487nsr.step/mc3487nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
004525dd2286938d, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).