component
FT8132Q
Public Made by Adomby adom
Fortior Tech Motor Driver ICs, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFT8132Q
Fortior Tech · Motor Driver ICs · QFN-24(4x4)
FT8132Q from Fortior Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ASPEED | input | Analog speed-control input, valid over 0 to VDD5 V, active when analog-voltage speed mode is selected. |
| 2 | DIR | input | Motor direction input with internal pull-up, default high: 0 gives reverse phase sequence U-->W-->V and 1 gives forward U-->V-->W. |
| 3 | L_U | output | 3P3N pre-driver low-side U-phase output with an internal 25kΩ pull-down resistor. |
| 4 | L_V | output | 3P3N pre-driver low-side V-phase output with an internal 25kΩ pull-down resistor. |
| 5 | L_W | output | 3P3N pre-driver low-side W-phase output with an internal 25kΩ pull-down resistor. |
| 6 | H_PU | output | 3P3N pre-driver high-side U-phase output with an internal 50kΩ pull-up resistor. |
| 7 | H_PV | output | 3P3N pre-driver high-side V-phase output with an internal 50kΩ pull-up resistor. |
| 8 | H_PW | output | 3P3N pre-driver high-side W-phase output with an internal 50kΩ pull-up resistor. |
| 9 | VCC | power_in | Input supply, 6V to 28V DC, with at least a 10μF capacitor to ground. |
| 10 | FG/RD/SDA | bidirectional | Speed feedback FG output or fault-indication RD output (open-drain), and I2C data line SDA (open-drain) in I2C mode. |
| 11 | SPEED | input | Motor speed input for PWM or CLOCK speed control, which serves as the SCL clock line in I2C mode. |
| 12 | VSS | power_in | Ground. |
| 13 | VDD5 | power_out | 5V LDO output that needs a 1μF to 4.7μF capacitor to ground and is not to be used to power external circuits. |
| 14 | HBIAS | power_out | Hall bias supply, switched internally from VDD5, with a maximum load capability of 10mA. |
| 15 | A2M/FAULTN | bidirectional | AMP2 negative input, or open-drain fault-indication output FAULTN when used as the fault pin. |
| 16 | A2P/HWP | input | AMP2 positive input, or W-phase Hall-sensor positive input. |
| 17 | EW/HWM | input | W-phase back-EMF divider input, or W-phase Hall-sensor negative input or Hall-IC input. |
| 18 | EV/HVM | input | V-phase back-EMF divider input, or V-phase Hall-sensor negative input or Hall-IC input. |
| 19 | A1P/HVP | input | AMP1 positive input, or V-phase Hall-sensor positive input. |
| 20 | A1M/HUM | input | AMP1 negative input, or U-phase Hall-sensor negative input. |
| 21 | EU/HUP | input | U-phase back-EMF divider input, or U-phase Hall-sensor positive input or Hall-IC input. |
| 22 | A0M | input | AMP0 negative input. |
| 23 | A0P | input | AMP0 positive input. |
| 24 | ICP | input | Overcurrent-protection input, used for current sampling when ICP overcurrent mode is selected. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fortior Tech |
| Package | QFN-24(4x4) |
| Category | Power Supply Chip |
| Pins | 25 |
CAD (KiCad official)
- Symbol:
FT8132Q - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
ft8132q-etched.step/ft8132q-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft8132q.step/ft8132q.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fortior Tech datasheet (26 pp, sha256
93b3ecc09d8a92eb, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).