Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FT8132Q

Fortior Tech · Motor Driver ICs · QFN-24(4x4)

FT8132Q from Fortior Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ASPEED input Analog speed-control input, valid over 0 to VDD5 V, active when analog-voltage speed mode is selected.
2 DIR input Motor direction input with internal pull-up, default high: 0 gives reverse phase sequence U-->W-->V and 1 gives forward U-->V-->W.
3 L_U output 3P3N pre-driver low-side U-phase output with an internal 25kΩ pull-down resistor.
4 L_V output 3P3N pre-driver low-side V-phase output with an internal 25kΩ pull-down resistor.
5 L_W output 3P3N pre-driver low-side W-phase output with an internal 25kΩ pull-down resistor.
6 H_PU output 3P3N pre-driver high-side U-phase output with an internal 50kΩ pull-up resistor.
7 H_PV output 3P3N pre-driver high-side V-phase output with an internal 50kΩ pull-up resistor.
8 H_PW output 3P3N pre-driver high-side W-phase output with an internal 50kΩ pull-up resistor.
9 VCC power_in Input supply, 6V to 28V DC, with at least a 10μF capacitor to ground.
10 FG/RD/SDA bidirectional Speed feedback FG output or fault-indication RD output (open-drain), and I2C data line SDA (open-drain) in I2C mode.
11 SPEED input Motor speed input for PWM or CLOCK speed control, which serves as the SCL clock line in I2C mode.
12 VSS power_in Ground.
13 VDD5 power_out 5V LDO output that needs a 1μF to 4.7μF capacitor to ground and is not to be used to power external circuits.
14 HBIAS power_out Hall bias supply, switched internally from VDD5, with a maximum load capability of 10mA.
15 A2M/FAULTN bidirectional AMP2 negative input, or open-drain fault-indication output FAULTN when used as the fault pin.
16 A2P/HWP input AMP2 positive input, or W-phase Hall-sensor positive input.
17 EW/HWM input W-phase back-EMF divider input, or W-phase Hall-sensor negative input or Hall-IC input.
18 EV/HVM input V-phase back-EMF divider input, or V-phase Hall-sensor negative input or Hall-IC input.
19 A1P/HVP input AMP1 positive input, or V-phase Hall-sensor positive input.
20 A1M/HUM input AMP1 negative input, or U-phase Hall-sensor negative input.
21 EU/HUP input U-phase back-EMF divider input, or U-phase Hall-sensor positive input or Hall-IC input.
22 A0M input AMP0 negative input.
23 A0P input AMP0 positive input.
24 ICP input Overcurrent-protection input, used for current sampling when ICP overcurrent mode is selected.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package QFN-24(4x4)
Category Power Supply Chip
Pins 25

CAD (KiCad official)

  • Symbol: FT8132Q
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: ft8132q-etched.step / ft8132q-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft8132q.step / ft8132q.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (26 pp, sha256 93b3ecc09d8a92eb, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF