3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV3011BIDBVR
Texas Instruments · Comparators · SOT-23-6
TLV3011BIDBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Comparator output; on the TLV3011B this is an open-drain output that may be pulled up to any voltage up to 5.5 V regardless of the supply voltage. |
| 2 | V- | power_in | Negative (lowest) power supply; supply voltage VS = (V+) - (V-) must be 1.65 V to 5.5 V for the B versions. |
| 3 | IN+ | input | Non-inverting comparator input; recommended input voltage range is (V-) - 0.2 V to (V+) + 0.2 V. |
| 4 | IN- | input | Inverting comparator input; recommended input voltage range is (V-) - 0.2 V to (V+) + 0.2 V. |
| 5 | REF | output | Reference output of the integrated 1.242 V reference, stable with up to 10 nF capacitive load and able to source or sink up to 0.5 mA (typical). |
| 6 | V+ | power_in | Positive (highest) power supply; supply voltage VS = (V+) - (V-) must be 1.65 V to 5.5 V for the B versions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VS | -0.5 | 7 | V | VS = (V+), (V-) | 4 | |
| Input pins voltage (absolute maximum) | -0.5 | 7 | V | IN+, IN- from (V-) | 4 | ||
| Output voltage, open-drain (absolute maximum) | -0.5 | 7 | V | OUT (open-drain) from (V-) | 4 | ||
| Output short circuit current | 10 | mA | Short-circuit to (V-) or (V+) | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage B-versions (recommended) | VS | 1.65 | 5.5 | V | VS = (V+), (V-), B-versions | 5 | |
| Input voltage range | -0.2 | V | From (V-); maximum is (V+) + 0.2 V | 5 | |||
| Output voltage range, open-drain B-versions | -0.2 | 5.5 | V | From (V-), open-drain, B-versions | 5 | ||
| Ambient temperature | TA | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 162.5 | °C/W | TLV3011B, TLV3012B, DBV (SOT-23) 6 pins | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 78.8 | °C/W | TLV3011B, TLV3012B, DBV (SOT-23) 6 pins | 5 | ||
| Junction-to-board thermal resistance | RθJB | 42.1 | °C/W | TLV3011B, TLV3012B, DBV (SOT-23) 6 pins | 5 | ||
| Junction-to-top characterization parameter | ψJT | 21.2 | °C/W | TLV3011B, TLV3012B, DBV (SOT-23) 6 pins | 5 | ||
| Junction-to-board characterization parameter | ψJB | 41.9 | °C/W | TLV3011B, TLV3012B, DBV (SOT-23) 6 pins | 5 | ||
| Input offset voltage | VOS | -6 | 0.3 | 6 | mV | VCM = (V-) | 8 |
| Input offset voltage over temperature | VOS | -9 | 9 | mV | VCM = (V-), TA = -40°C to +125°C | 8 | |
| Input offset voltage drift | dVIO/dT | -12 | 12 | µV/°C | VCM = (V-), TA = -40°C to +125°C | 8 | |
| Power supply rejection ratio | PSRR | 100 | 1000 | µV/V | VCM = (V-), VS = 1.65 V to 5.5 V, TA = -40°C to +125°C | 8 | |
| Input hysteresis voltage | VHYS | 2 | 6 | 8 | mV | TA = -40°C to +125°C | 8 |
| Input bias current | IB | -10 | 4.5 | 10 | pA | VCM = VS /2 | 8 |
| Input offset current | IOS | -10 | 1 | 10 | pA | VCM = VS /2 | 8 |
| Common-mode voltage range | VCM-Range | -0.2 | 0.2 | V | Min = (V-), 0.2 V, max = (V+) + 0.2 V; VS = 1.8 V to 5.5 V | 8 | |
| Common mode rejection ratio (wide range) | CMRR | 60 | 74 | dB | VCM = (V-) + 1.5 V to (V+) + 0.2 V, VS = 5.5 V | 8 | |
| Common mode rejection ratio (full range) | CMRR | 54 | 62 | dB | VCM = (V-), 0.2 V to (V+) + 0.2 V, VS = 5.5 V | 8 | |
| Output low voltage swing from (V-) | VOL | 160 | 200 | mV | VS = 5 V, ISINK = 5 mA, TA = -40°C to +125°C | 8 | |
| Reference voltage | VOUT | 1.223 | 1.242 | 1.26 | V | 8 | |
| Reference accuracy | -0.25 | 0.25 | % | 8 | |||
| Reference accuracy | -1.5 | 1.5 | % | 8 | |||
| Reference temperature drift | dVOUT/dT | 40 | 100 | ppm/℃ | TA = -40°C to +125°C | 8 | |
| Reference load regulation, sourcing | dVOUT/dILOAD | 0.36 | 1 | mV/mA | 0 mA < ISOURCE ≤ 0.5 mA | 8 | |
| Reference load regulation, sinking | dVOUT/dILOAD | 6.6 | mV/mA | 0 mA < ISINK ≤ 0.5 mA | 8 | ||
| Reference line regulation | dVOUT/dVS | 10 | 100 | µV/V | 1.65 V ≤ VS ≤ 5.5 V | 8 | |
| Quiescent current per comparator | IQ | 2.4 | 3.1 | µA | Output is logic high | 9 | |
| Quiescent current per comparator over temperature | IQ | 3.6 | µA | Output is logic high, TA = -40°C to +125°C | 9 | ||
| Power-on time | tON | 1.9 | ms | 10 |
CAD (KiCad official)
- Symbol:
TLV3011BIDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tlv3011bidbvr-etched.step/tlv3011bidbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv3011bidbvr.step/tlv3011bidbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
02993c016420887e, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).